シーメンス 3SB3400-0C ねじ端子コンタクトブロック

3SB3400-0C: SIRIUS 3SB3 series, フロントパネル mounted single contact block, 1ノースカロライナ州 (1 通常閉), screw terminal type. Designed for 22mm 押しボタン / selector switches, Positive Opening safety contact.

製品の状態: 製造中止 (PM490). Original manufacturer supply stopped. Recommended replacement model: 3SU1400-1AA10-1CA0 (SIRIUS ACT series)

Core Technical Data

選択 & Matching Guidelines

1. Cross reference of contact blocks in the same series

3SB3400-0B: 1いいえ (Single Normally Open)

3SB3400-0C: 1ノースカロライナ州 (Single Normally Closed, このモデル)

3SB3400-0A: 1NO+1NC (1 Changeover)

3SB3400-0D: 2いいえ; 3SB3400-0E: 2ノースカロライナ州

2. Stacking Rule: One contact block occupies one mounting slot; 最大. 3 contact blocks for non-illuminated pushbuttons
3. Positive Opening Feature: This NC contact is a safety contact, suitable for E-Stop circuits and meets positive opening requirements for safety loops. Priority selection for emergency stop applications.

アプリケーションシナリオ

22mm pushbuttons, rotary switches and emergency stop signal collection in control cabinets

PLC digital input circuits, safety E-Stop loops, インターロック回路

Guard interlocks, equipment limit detection, fault alarm signals

トラブルシューティングガイド

1. Low-level signal (5V/1mA): Contact oxidation shall be checked first. Although low-level reliability is specified, aged contacts may suffer poor contact.
2. 安全回路: Positive opening NC contact must be used. Ordinary contacts are prohibited as substitutes. During maintenance, manually actuate pushbutton and verify reliable contact opening.
3. 配線: Control tightening torque of screw terminals; loose connections cause signal jitter. 端子 IP20, metal dust prevention required inside cabinet terminal area.

Replacement Model Description

Direct OEM replacement: 3SU1400-1AA10-1CA0 (SIRIUS ACT,1ノースカロライナ州, ネジ端子, positive opening, 22mm pushbutton system).

Bases of old & new series cannot be interchanged. Full assembly replacement (アクチュエータ + ベース + 連絡先) is required when switching to 3SU1.

1. 3SB3 Pushbutton Assembly Selection Examples (Based on 3SB3400-0C 1NC Contact Block)

Core rule: 3SB3 adopts modular assembly: アクチュエーター + Base Holder + コンタクトブロック. マックス. 3 contact blocks for non-illuminated pushbuttons; max.2 contact blocks for illuminated pushbuttons. Each contact block occupies one mounting slot.

Contact block list recap

3SB3400-0B:1いいえ

3SB3400-0C:1ノースカロライナ州 (このモデル, positive opening safety contact)

3SB3400-0A:1NO+1NC

3SB3400-0D:2いいえ; 3SB3400-0E:2ノースカロライナ州

Example1: Mushroom Head Emergency Stop (安全回路, Most Common for 3SB3400-0C)

目的: Equipment emergency stop, safety circuit positive opening NC

アクチュエーター:3SB3000-1HA20 (Red mushroom head, twist reset)

Base holder:3SB3901-0AC (3-position holder)

接触: 3SB3400-0C (1NC positive opening)

Complete factory pre-assembled part number:3SB3203-1HA20-0AC0 (factory pre-fitted with 1NC, no separate contact ordering required). Redundant safety circuit can add a second 3SB3400-0C for dual NC.

Example2: Red Momentary Pushbutton (Fault Acknowledge)

目的:Fault reset, PLC DI acquisition

アクチュエーター:3SB3000-0AA21 (Red flat momentary button)

Holder:3SB3901-0AC (3-position holder)

Contact combination:3SB3400-0B (1いいえ) + 3SB3400-0C (1ノースカロライナ州)

関数:NO for DI signal; NC for circuit fault verification

Example3: 2-position Selector Switch (0-私)

目的:Local/Remote mode switchover

Switch actuator:3SB3000-2CA11 (2-position latching selector switch)

Holder:3SB3901-0AC

接触:3SB3400-0B (NO for I position) + 3SB3400-0C (NC for 0 位置)

Example4: Illuminated Green Start Pushbutton

制限: Max.2 contact blocks for illuminated pushbuttons

アクチュエーター:3SB3000-4AA31 (Green illuminated flat pushbutton)

Lamp holder:3SB3401-1A (LED lamp holder)

接触:3SB3400-0B (1NO for start) + 3SB3400-0C (1インターロック用NC)

1. Replacement List from Old 3SB3 to New SIRIUS ACT 3SU1

⚠️Important: 3SB3 and 3SU1 bases/contact blocks are completely non-interchangeable. Contacts cannot be replaced alone; full assembly replacement (アクチュエータ + ベース + 連絡先) is mandatory.

Original contact block 3SB3400-0C (1NC screw terminal, positive opening)

→ Corresponding contact: 3SU1400-1AA10-1CA0 (1ノースカロライナ州, ネジ端子, positive opening)

Ⅲ. 組み立て & Engineering Guidelines

1. Contact stacking sequence: Mount safety NC contact (3SB3400-0C) closest to panel side for best mechanical synchronization. Recommended for emergency stop safety circuits.
2. トルク: Screw terminal tightening torque 0.8~1.2 N·m. Loose connections lead to DI signal fluctuation; loose terminals strictly prohibited for safety circuits.
3. Low-level signal: PLC passive DI (5V/1mA). Use OEM contacts preferably. Aged contacts tend to oxidize, NC circuits more prone to intermittent conduction.
4. パネルカットアウト: Standard Φ22mm round hole; round 3SB3 panel thickness: 1～6 mm; square 3SB3 panel thickness: 1～4 mm.
5. Migration Notes During Model Replacement
6. Cabinet cutout unchanged, both Φ22mm, but front bezel profile differs. Deburr if old cutout edge corroded.
7. Terminal position changes after replacement, redraw terminal diagram to avoid wiring misconnection.
8. 安全回路: New 3SU1 1NC contact also features positive opening, ENに準拠 60947-5-1 and can directly replace original 3SB3400-0C for emergency stop applications.
9. Spare part strategy: 3SB3 series discontinued by OEM, only stock parts available on market. New projects adopt 3SU1 directly.

シーメンス 3SB3400-0C Mounting Dimensions

This model is a single contact block (1ノースカロライナ州) belonging to 3SB3 series modular 22mm pushbutton components. The contact block has no separate cutout, clipped onto 3SB3 holder (3SB3901-0AC). Complete pushbutton panel cutout Φ22mm.

Contact Block Physical Dimensions (mm)

幅: 10 mm (standard width of single contact block, each block occupies 10mm during stacking)

身長: 36.5 mm

深さ: 20 mm (from holder surface backward including screw terminals)

Single contact blocks (3SB3400-0B / 0C) share identical dimensions. Double contact blocks (3SB3400-0A/0D/0E) width =20mm.

Complete Pushbutton Assembly Dimensions (Holder + Contact Blocks)

1. パネルカットアウト: Φ22 mm (standard 22mm pushbutton round hole)

Round pushbutton panel thickness: 1～6 mm

Square pushbutton panel thickness: 1～4 mm

2. 3-position holder 3SB3901-0AC: 最大. 3 single contact blocks stacked, total stacking width=3×10=30 mm
3. Cabinet rear depth:

1 接点ブロック: ~42 mm (panel rear face to terminal end)

Fully loaded with 3 contact blocks: ~42 mm (深さは変わらない, only lateral width increases)

Mounting Spacing Requirements

Center-to-center minimum distance between adjacent 22mm pushbuttons: 50mm (round type); 分. 50mm for square 3SB3 pushbuttons

Reserved rear cabinet space: ≥45mm for wiring and terminal tightening

Dimension Comparison with Replacement Model 3SU1400-1AA10-1CA0 (3SU1 Contact Block)

Body dimension: W10mm × H36.5mm × D20mm, similar body size

⚠️Holder structure differs and cannot be directly interchanged. Panel cutout still Φ22mm but rear mounting profile is different.

Engineering Drawing Notes

1. Contact block is clip-on type, no fixing screws; slide and clip into holder rail.
2. Terminal screws protrude rearward. Reserve ≥45mm depth for cabinet layout.
3. Stacking sequence: Mount safety NC contact (3SB3400-0C) nearest to panel.