Siemens 6EP1333-2BA20 単相 DIN レール電源 - コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ

微信: +86-13184948252 ワッツアップ: 0086-13811255435 電子メール: kent@bestcontactor.com

について 接触 |

Siemens 6EP1333-2BA20 単相 DIN レール電源 - コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ

PLC/

Siemens 6EP1333-2BA20 単相 DIN レール電源

正式な製品名: SITOP PSU100S 24V DC /5A Regulated Power Supply Order Code Definition: 6EP = SITOP power supply family; 1333=24V 5A; 2BA20=PSU100S version, No Ex explosion-proof certification ✅ Core Electrical Specifications Input Power supply: Single-phase AC 120/230V, 50/60Hz Voltage range: AC 85–132V (120V range) / 170–264V (230V range), Not full wide automatic range Rated ...

  • 製品詳細

正式な製品名: SITOP PSU100S 24V DC /5A Regulated 電源

Order Code Definition:

6EP = SITOP power supply family; 1333=24V 5A; 2BA20=PSU100S version, No Ex explosion-proof certification

✅ 主要な電気仕様

入力

電源: Single-phase AC 120/230V, 50/60Hz

電圧範囲: AC 85–132V (120V range) / 170–264V (230V range), Not full wide automatic range

定格入力電流: 1.3A at 230V; 2.1A at 120V

Built-in input fuse; Recommended circuit breaker: B10A / C6A

ホールドアップ時間: ≥20ms at rated load

出力

評価済み: DC24V, 5あ, 120W

Output adjustable range: 22.8 ~ 28V (via potentiometer on housing)

Static accuracy: ±3%; Maximum ripple 150mV peak-to-peak

過負荷機能: 150% 定格電流 5 seconds per minute; Continuous operation at 120% 負荷

ステータス表示: 緑色のLED (24V OK) + Normally-open relay alarm contact (closed when power healthy)

📐 Mechanical & 環境

取り付け: DIN 35mm rail mounting, natural air cooling

重さ: 0.4kg

動作温度: -10 ~ +70℃; Derating starts above 60℃ (3%/K); Upper limit drops to 50℃ if output >24V

保管温度: -25 ~ +85℃; Humidity class EN60721 3K3

原産国: オーストリア; HSコード: 85044083

🧩 特徴

  1. Isolated industrial switching power supply, standard 24V power source for PLC, sensors and valve islands
  2. Relay signal contact, can be connected to PLC for power fault diagnosis
  3. Parallel connection for current expansion (Max ambient temperature derate by 10℃ when paralleled)
  4. 保護: 過電流, 過電圧, overtemperature protection
  5. 認証: UL508, CE, RoHS; This model no longer supports Ex certification

⚠️ Alternative Selections

Smaller model in same series: 6EP1332-2BA20 (24V/2.5A)

Larger model in same series: 6EP1334-2BA20 (24V/10A)

国内代替品のリファレンス: Meanwell DR-120-24, Phoenix QUINT-PS/1AC/24DC/5

🛠️ Common Troubleshooting

  1. No green LED: Check AC input voltage, 内部ヒューズが切れた; Output short-circuit protection latch, power cycle to reset
  2. Voltage drop under load: 入力電圧が低い, overtemperature derating, continuous load exceeding 120% rating
  3. Alarm relay not closed: Power supply under protection state or output voltage too low

Application Scenarios for 6EP1333-2BA20 (SITOP PSU100S 24V/5A)

コアの位置決め: Single-phase AC to 24VDC SELV control power supply inside small control cabinets, to power PLC, I/Oモジュール, センサー, バルブ, HMI and other industrial components. Equipped with power-good relay alarm contact, suitable for stand-alone / small station automation, DINレールマウント.

  1. 機械製造業 / Stand-alone Automation (最も一般的な)
  2. 包装機械: Vertical packaging machines, ラベラー, ケースパッカー, heat shrink machines. Power supply for S7-1200/1500, 光電センサー, 近接センサー, 電磁弁, safety relays and touch screens; 5A capacity matches I/O loops of medium-small standalone machines.
  3. 運ぶ & 仕分け装置: 小型ベルトコンベヤ, ローラーライン, トランスファーマシン. Supply I/O modules, エンコーダ, 光電センサー, pneumatic valve islands; Support parallel expansion.
  4. 射出成形 / stamping auxiliary equipment: Manipulator control cabinet, material feeder, mold temperature controller cabinet; Resist grid fluctuation, suitable for loads with start impulse current.
  5. Machine tool auxiliary control box: Small special machines, fixture control cabinet, power for sensors, indicator lights and safety circuits.
  6. プロセスオートメーション (水処理, 空調設備, 市営)
  7. 水処理: Small water purification equipment, 化学薬品投与システム, reclaimed water reuse control cabinet. PLC + analog transmitters, レベルスイッチ, 電磁弁; Relay alarm contact connects to PLC for remote power failure alarm.
  8. 空調設備: Building air handling units, フレッシュエアユニット, exhaust fan control cabinet; Power DDC, 差圧センサー, electric actuators.
  9. Municipal small pump stations, sewage monitoring stations: Field control box, sensor acquisition + remote communication module.

注記: This model without Ex certification; If used in explosive hazardous area, power supply body must be installed inside IP54 or higher explosion-proof cabinet.

  1. ロジスティクス, 倉庫保管, Auxiliary Stations of Automated Production Lines

Small workstation control cabinet of mini AS/RS, AGV ground station, scanning inspection station; Power ET200SP remote I/O, 光電センサー, RFID readers, インジケーターライト.

Automotive component assembly stations, test fixture cabinets, standalone test benches.

  1. その他の産業
  2. 食べ物 & 製薬: Small filling and inspection equipment control cabinet; CE/UL compliant, suitable for standalone control in clean rooms.
  3. Laboratory test equipment, non-standard automatic test benches.
  4. PV / energy storage auxiliary control cabinet: Local signal acquisition cabinet (only for control circuit, not power circuit).

✅ Typical Load Combination Reference (5A Capacity)

S7-1200 CPU + 8~16 DI/DO points + HMI + several proximity/photoelectric sensors + 2~4 pcs 24V solenoid valves + 安全リレー.

注意: Solenoid valve has high inrush current, reserve margin during selection; High-power valves require separate power loop.

⚠️ Not Recommended Applications

  1. High-power 24V motors, heavy heating loads (This is control power supply, not power supply for high power loads)
  2. 3-phase input system (unless single-phase power is tapped from front end)
  3. Heavy corrosion environment, direct outdoor exposure (must be installed inside control cabinet)
  4. Direct installation in hazardous explosive area
  5. Main power supply for large systems (10A+ model or redundant scheme recommended)

✅ Selection Key Points

利点: Power-good relay output, 150% short-time overload capacity, compact DIN rail mounting, SELV safety isolation, ideal for small control cabinets requiring power status monitoring.

Capacity expansion: Multiple units in parallel to increase total output current; Reduce maximum ambient temperature when paralleling.

Full Model List of SITOP PSU100S Series (Single-phase AC Input, DINレール電源)

全モデル: Input AC 120/230V (85–132V /170–264V), equipped with Power-good relay alarm contact, 自然冷却, DIN35レール取付.

24V DC Output Series (最も一般的な, sub-series of your model)

注文番号.仕様力
6EP1332-2BA20DC24V / 2.5あ60W
6EP1333-2BA20DC24V / 5あ120W
6EP1334-2BA20DC24V / 10あ240W
6EP1336-2BA10DC24V / 20あ480W

12V DC Output Series

注文番号.仕様力
6EP1322-2BA00DC12V / 7あ84W
6EP1323-2BA00DC12V /14A168W

Derived SIPLUS Wide-temperature Coated Version (オプション, not standard PSU100S)

6AG1334-2BA20-4AA0: SIPLUS PS PSU100S 24V/10A, コンフォーマルコーティング, 動作温度 -25 ~ +70℃, for high humidity and corrosive environments (鉄道, outdoor cabinet)

✅ Common Features of Series

  1. Relay alarm output (Power-good dry contact for PLC diagnosis)
  2. 短時間の過負荷: 150% load for 5 秒, handles solenoid valve impulse current
  3. 保護: 過電流, 過電圧, overtemperature protection
  4. Multiple units can be paralleled to increase output current (Derate ambient temperature upper limit)
  5. 認証: CE, UL508, RoHS; No Ex explosion-proof certification

⚠️ Distinction Reminder

PSU100S ≠ SITOP smart / PSU100C / PSU6200, 混乱しないでください:

PSU100S: With relay alarm contact, 上のリスト;

SITOP smart: Without relay alarm, 低コスト;

PSU6200: 新世代, with communication diagnosis function.

Input Voltage Specifications of 6EP1333-2BA20

Single-phase AC, Automatic dual-range switching, not continuous 85~264V full wide range

範囲 1 (120V range): AC 85V ~ 132V

範囲 2 (230V range): AC 170V ~ 264V

Rated input: AC 120V / 230V

入力周波数: 47~63Hz (50/60Hz対応)

重要な注意事項

  1. Voltage gap: Cannot operate stably when AC voltage between 132V ~170V. Power supply will not work reliably if grid voltage falls within this gap, must pay attention during selection.
  2. Power supply automatically identifies voltage range internally, no manual DIP switch required.
  3. ホールドアップ時間: ≥20ms at rated load and rated input voltage.
  4. In domestic 3-phase cabinet, single-phase 220V tapped (170~264V range), falls into 230V range and works properly.

Housing Dimensions of 6EP1333-2BA20 (幅×高さ×奥行き)

50 mm× 125 mm× 120 mm

幅 (DIN rail direction): 50 mm

身長 (垂直): 125 mm

深さ (into cabinet): 120 mm

設置スペース (Heat dissipation requirement, critical for cabinet layout)

Top clearance: 50 mm

Bottom clearance: 50 mm

左 & 右: 0 mm, can be mounted side-by-side with other modules

Mount on EN 60715 standard 35mm DIN rail, wall mounting not supported.

重さ

正味重量: 約. 0.4 kg

Dimension comparison of PSU100S series (キャビネットレイアウト用)

注文番号.W×H×D mm
6EP1332-2BA2032.5 × 125 × 120
6EP1333-2BA2050 × 125 × 120
6EP1334-2BA2070 × 125 × 120
6EP1336-2BA10115 × 145 × 150

前へ:

次:

返信を残す

伝言を残す