Pentronic 5810080-001 온도 센서 - 접촉기,회로 차단기,감지기,인코더,PLC,변환기

위챗: +86-13184948252 왓츠앱: 0086-13811255435 이메일: kent@bestcontactor.com

에 대한 연락하다 |

 Pentronic 5810080-001 온도 센서 - 접촉기,회로 차단기,감지기,인코더,PLC,변환기

무역 뉴스

Pentronic 5810080-001 온도 센서

상표: Pentronic (스웨덴), a Nordic manufacturer of high-precision 온도 센서. 그만큼 5810080 series is an assembled industrial Pt100 Resistance Temperature Detector (RTD). It is often mistakenly referred to as a thermocouple in the industry; this distinction is critical.

  1. 모델 코드 설명

5810080: 제품 시리즈, assembled industrial platinum RTD with terminal head and protection thermowell

-001: 버전 / construction suffix, representing single Pt100 element, 클래스 A 정확도, base version with standard thermowell material, probe length and thread specification

Other variants within the series include 5810080-002 그리고 5810080-003, commonly dual Pt100 elements, alternative probe lengths or pressure ratings.

  1. 핵심 기술 사양
목사양
Sensing ElementPt100 Platinum RTD (compliant with IEC60751)
정확도 등급클래스 A
온도 범위-200℃ ~ +500℃ (depends on thermowell material)
배선 구성Standard 4-wire (3-wire optional). The 4-wire design eliminates lead resistance error and is preferred for high-precision measurement
Thermowell Material316L 스테인레스 스틸 (기준); Hastelloy or Titanium optional for highly corrosive media
Probe ConstructionSolid mineral-insulated / drilled protection tube, vibration-resistant structure (Pentronic thermally conductive filling for faster response)
Terminal HeadAluminium waterproof head, IP65; built-in temperature transmitter optional (4-20mA output)
설치Threaded installation (G1/2, M20×1.5 commonly used), compatible with protection thermowell
응답 시간t0.5: 대략. 2~8s (in liquid media, subject to probe diameter)
실SIL2 loop assessment available (dual-element version 5810080-002)
  1. 핵심 기능
  2. Excellent stability: Class A platinum wire with annual drift as low as 0.05℃, suitable for long-term continuous process measurement
  3. Vibration-resistant construction: Internal metal filling reduces air gaps, withstands vibration for temperature measurement on compressor, pump and turbine casings
  4. Replaceable insert: Sensing element is a removable insert. Sensor core can be replaced without removing the thermowell, cutting downtime maintenance cost
  5. Corrosion-resistant options: Custom Hastelloy and Monel thermowells available for corrosive chemical service
  6. 옵션 액세서리: Built-in HART temperature transmitter providing direct 4–20mA signal to DCS/PLC
  7. 일반적인 애플리케이션 시나리오
Pentronic 5810080-001 온도 센서

Pentronic 5810080-001 온도 센서

Thermal power, 기름 & 가스, 화학적인, paper and pharmaceutical industries; temperature measurement of pipelines, equipment casings and tank media; high-precision temperature acquisition for TSI and process control loops.

Frequently paired with Bently Nevada TSI systems for unit temperature monitoring.

  1. 설치 & 시운전 지침
  2. 설치: Protection thermowell is recommended for online replacement. Probe insertion depth ≥ 8~10 times thermowell inner diameter to ensure accurate temperature reading
  3. 배선: 4-wire Pt100 with two excitation wires and two measurement wires. Must not be used with thermocouple extension wires
  4. 차폐: Cable shield single-point grounded inside terminal head to avoid common-mode interference; route away from power cables
  5. 구경 측정: Calibrate resistance values against IEC60751 using dry block calibrator or constant temperature oil bath
  6. Explosion-proof versions: 지금부터 / Ex d available; certificates must be verified for hazardous area selection
  7. Common Troubleshooting Checklist
  8. Temperature fluctuation: Loose lead connections, multi-point grounding of shield, terminal loosening caused by field vibration
  9. Persistently high / low readings: Probe not fully immersed in media, fouled thermowell, excessive lead resistance (switch to 4-wire configuration)
  10. Open circuit alarm: Broken platinum wire or bending damage at root (frequently seen under vibrating conditions)
  11. Increased drift: Platinum element aging after prolonged over-temperature operation
  12. Series Alternative & 선택 참고
모델건설애플리케이션
5810080-001Single Pt100, 클래스 ASingle-point temperature measurement for general process
5810080-002Dual Pt100, Class A/ARedundant measurement, SIL2 loop
5810080-003Single element, extended probe / high-pressure thermowellDeep insertion, high-pressure pipelines

이전:

다음:

답장을 남겨주세요

메시지를 남겨주세요