ABB A185-30-11-80 AC 접촉기

주문번호: 1SFL491001R8011，HS코드: 85364900

✅ 모델 코드 설명

A185: 프레임 크기, AC-3 rated current 185A @400V

30: 3 normally open main poles, 0 normally closed main poles (3-폴)

11: 보조자 contacts 1NO + 1NC

80: Coil code → AC220~230V 50Hz / AC230~240V 60Hz

✅ Key Electrical Parameters

Main circuit rated voltage: 690다섯 (IEC), UL 600V

AC-3 (모터 부하):

380/400다섯: 185에이, for 90kW motor

690다섯: 170에이, for 132kW motor

AC-1 (저항 부하): 275A @690V (40℃)

기존열전류 Ith: 275에이

절연전압 Ui: 1000다섯; 임펄스 내전압 Uimp: 8kV

기계적 수명: 5 백만 개의 작업; AC-3 전기적 수명: 최대 300 작업/시간

단시간 내전류: 2000A for 1s; 150010초용 A

✅ Coil Parameters (220VAC)

돌입 전력: 550버지니아 (50헤르츠) / 600버지니아 (60헤르츠)

Sealed holding power: 35버지니아 (50헤르츠) / 40버지니아 (60헤르츠), holding power consumption 12.5W

Coil operating range: 0.85~1.1×Uc, max ambient temperature 70℃

✅ 배선 & 치수

Main circuit copper cable: 6~185mm²; Aluminium cable 25~150mm²; Wiring torque 18N·m

전반적인 차원: W111.5 × D160 × H196 mm, Net weight 2.9kg

보호: Coil terminals IP20, main terminals IP00

✅ Replacement Information (중요한)

A185 belongs to the old A series, 단종; Direct upgrade replacement model: AX185-30-11-80 (AX 시리즈, 같은 등급, same coil, drop-in replacement)

✅ Optional Accessories

열과부하 계전기: TA200DU (for 185A range)

보조 접점 블록: CA5, CAL5 series

서지 억제기, 기계적 인터록, 위상 장벽, terminal protective cover

비교: 씨줄 A185-30-11-80 VS AX185-30-11-80

접미사 -80 same definition: AC220~230V 50Hz / AC230~240V 60Hz; Mounting hole position, main terminal layout and auxiliary contact definition are fully compatible, direct on-site replacement

⚠️ Critical Replacement Notes

1. Motor load AC-3 (90kW): No impact, 직접 교체
2. Long-term AC-1 resistive load near 250A: Evaluate carefully; A185 Ith=275A provides larger margin
3. Circuit voltage >690다섯: AX is not suitable, cannot replace
4. Extra 2.3mm depth: Check clearance if contactor is fitted tight against cable trunking or door plate
5. 예비 부품 전략: New projects specify AX185 only; A185 only for emergency maintenance with existing stock
6. This list applies to Axxx-30-11-80 (3-폴, 내장 1NO+1NC 보조, AC220V 코일, discontinued old A series); 접미사 -80 = 220VAC coil
7. AX replacement: AXxxx-30-11-80, official direct upgrade for A series
8. Comparison basis: AC-3 @400V motor duty; 220V 코일, built-in 1NO+1NC for Schneider LC1D and Siemens 3RT5/3RT6
9. 메모: Only electrical equivalent rating, 기계적으로 교환 불가능; 장착 구멍, busbar and accessories are not compatible; HS code unified 85364900
10. ABB Old A Series Contactor List (단종, 30-11-80, 220VAC)

주목: A series also includes A370, A400, A500 larger frames, rarely used for general projects. A series is different from AF series (AF = wide-voltage coil type, not included here)

2. Cross-Brand Equivalent Rating Table (AC-3 400V, 220V 코일, 내장 1NO+1NC)

3. Important Replacement Reminders
4. A → AX is the only drop-in compatible upgrade: Same mounting pitch, terminal layout and auxiliary contact logic; no busbar modification required
5. Schneider LC1D and Siemens 3RT5: Only electrical equivalent, 기계적으로 교환 불가능. DIN 레일, 장착 구멍, terminal spacing and thermal relay interfaces are incompatible
6. Coil code rules (common for A & 도끼):

80: AC220~230V 50Hz / 230~240V 60Hz

84: AC110~120V

83: AC48V

85: AC380~400V

4. If you need other coil voltages (예를 들어. -84 for 110V), I can export a full list with -84 part numbers
5. Thermal relays: TA series is ABB dedicated. Schneider LRD and Siemens 3RU cannot clip directly onto A / AX contactors

Old ABB A series: Larger contact margin, higher short-circuit withstand, rated up to 1000V insulation; suitable for heavy duty, AC-4 frequent reversing, high voltage and high-reliability legacy equipment. 단점: 단종, scarce stock, higher coil noise, shrinking accessory ecosystem.

슈나이더 LC1D (테시스 D): Rich accessory portfolio, wide coil options, stable stock, cost competitive. Optimized for standard AC-3 motor duty, OEM mass production, 공조, elevators and standardized automation projects. Lower overload margin for extreme heavy shock loads.

Application Scenario Difference between Old ABB A series and Schneider LC1D

✅ Preferred applications for Old ABB A series

1. 수리하다 & overhaul of legacy original panels (old ABB packaged cabinets, large air compressors, 압출기, 종이 & metallurgy lines; drawing specification locked to A series, no busbar / cabinet modification allowed)
2. AC-4 frequent reversing, 조깅, heavy shock loads: 호이스트, 크레인, 파쇄기, roller tables, extruder main motors. Thicker silver contacts, higher thermal margin and superior 1s short-time withstand against current surges.
3. 690V motor circuits, high-power fans/pumps, high AC-1 resistive loads: Ui=1000V, higher Ith rating, suitable for continuous full resistive loading such as heating elements, furnace banks and bus transfer.
4. Process-critical equipment requiring high short-circuit withstand and Type 2 coordination: Production lines where contact welding is unacceptable.
5. Integrated ABB motor control packages: Matched with ABB MCB, Tmax MCCB and TA thermal relays for factory-tested protection coordination.

❌ Not recommended for A series

새로운 프로젝트, mass OEM, tight budget, heavy custom accessory requirements, stable lead time demand. A series is discontinued with rising premium and shrinking stock.

Weakness: Audible coil noise relatively high; fewer accessory choices vs LC1D; large frame stock volatile.

✅ Preferred applications for Schneider LC1D (테시스 D)

1. 새로운 프로젝트, OEM batch equipment, standard control cabinets: 컨베이어 라인, 포장 기계, 일반팬 & 슬리퍼, HVAC chillers. Good versatility, stable supply and favorable bulk pricing.
2. Elevator, crane auxiliary circuits, door motors, 브레이크 & star-point control: Mature industry adoption, abundant auxiliary contacts, 기계적 인터록, timer blocks and mirror NC contacts.
3. Solutions requiring complex accessory combinations: 기계적 인터록, pneumatic timer, 서지 억제기, extra auxiliary blocks, reversing contactor sets and star-delta modules. TeSys D has the broadest accessory range among the three brands.
4. Wide coil selection demand: AC24V, DC24V, DC110V, wide voltage coils, ideal for direct PLC DC output driving.
5. Export equipment with multi-certification requirements: UL, CSA, marine approvals widely available.
6. Standard AC-3 duty, operation frequency ≤300 times/hour, without frequent jogging or heavy surges for general motors.

❌ Not recommended for LC1D

Continuous operation above 690V

High-frequency AC-4 heavy duty with repeated current surges (lower contact margin than old A series at same rating)

Direct replacement into legacy ABB cabinets (requires rework of mounting, busbars and thermal relay interface)

비교표

빠른 선택 가이드

Old ABB cabinet repair, crane/crusher frequent reversing, 690V motor, no busbar change → Prefer A stock or AX

New cabinet, mass OEM, elevator/HVAC, reversing/star-delta, budget focus, stable supply → LC1D

Heavy shock loads and long-term stocking: Avoid A on new projects; choose AX. LC1D if budget limited and margin acceptable.

중요한 구별: AX is the compatible upgrade for A (같은 발자국, conservative performance de-rating). LC1D is only electrically equivalent, 기계적으로 교환 불가능.

I can provide AC-4 derating margin recommendation for A, AX and LC1D if you require.