ABB TTH200-Y0 Temperature Transmitter

TTH200: 씨줄 TTH200 series DIN-rail mount temperature transmitter (Head Mount / DIN rail dual mounting, HART 프로토콜)

Y0: 버전 / 구성 코드, stands for without local display, basic model, HART 4-20mA output, DIN 레일 장착.

시리즈 포지셔닝: The TTH200 is a 2-wire HART temperature transmitter from ABB. It accepts RTD, TC, mV and resistance signals, and serves as a replacement for the discontinued TTF200.

주요 사양

전원공급장치: 12～42V DC, 2-철사

산출: 4-20mA + 수사슴 5/7

Sensor Inputs:

RTD: Pt100, Pt1000, Cu50, 등. Supports 2/3/4-wire connection

TC: 비,이자형,제이,케이,엘,N,아르 자형,에스,티,U and other thermocouple types

Millivolt mV, resistance signal

정확성: RTD typical ±0.05℃; Thermocouple typical ±0.08℃

설치: DIN 레일 마운트; also can be installed inside sensor connection head (head mount)

주택: 플라스틱 하우징, IP20 (under DIN rail installation)

구성: HART communicator, ABB Device Manager, DTM/FDT software

Suffix code Y0: No local LCD display, basic version without extra hardware options.

비교: Y1 = with LCD display

일반적인 응용 분야

Industrial temperature measurement for HVAC, 화학적인, power and pharmaceutical industries. Used for temperature acquisition on pipelines and tanks, connected to DCS or PLC, paired with Pt100, K-type thermocouples.

모델 선택 & 대사

1. 같은 시리즈: TTH200-Y1 (디스플레이 포함)
2. Legacy model replacement: TTF200 → TTH200
3. 국내 대안: HART DIN rail temperature transmitters (such as Chongqing Chuanyi, Shangrun HART models)

일반적인 문제 해결

1. 출력 없음: Verify loop voltage ≥12V, check 2-wire wiring for short circuit and polarity
2. Fixed at 4mA: 센서 개방 회로 / not connected, mismatched configured sensor type (예를 들어. Pt100 configured while K thermocouple wired)
3. 온도 드리프트: Check RTD wiring (4-wire preferred), cold junction compensation setting for thermocouple
4. HART 통신 실패: 250Ω resistor inserted into loop, avoid high-power interference, verify HART address

예비 부품 & 구매 참고 사항

Complete order number is not limited to TTH200-Y0; extra codes for sensor type, explosion protection are required

Explosion-proof versions have separate suffixes; TTH200 has intrinsically safe Ex ia variants, confirm explosion-proof requirement before purchase

HS code reference: 90268000 (온도 트랜스미터, industrial measuring instrument)

ABB TTH200 Complete Ordering Selection Table

Order model structure: TTH200 [Explosion-proof code] [Display code] + [Additional options]

예: TTH200-Y0 = Non-explosion proof, without LCD; TTH200-S1-Y0 = NEPSI intrinsically safe, without LCD

1. 폭발 방지 / Certification Code (1st suffix segment)

2. Display Code

✅ Combination example: TTH200-Y0 (non-explosion proof no display); TTH200-E1-Y1 (ATEX intrinsically safe + LCD)

3. 주택 / Mounting Accessory Options (added separately, incompatible with some explosion-proof models)

⚠️ Note: Some explosion-proof models cannot be matched with H1/H2/H3 head housing options. Confirm before order.

4. Functional Additional Options

5. Supported Sensor Input Selection (configured in software, stated in order remarks)

RTD Resistance Temperature Detector

Pt100(IEC60751 0.00385)【Default】、Pt100(JIS)、Pt10、Pt50、Pt200、Pt500、Pt1000；Ni50/Ni100/Ni120/Ni1000；Cu10/Cu100；Resistance signal 0~500Ω / 0~5000Ω; support 2/3/4-wire

Thermocouple TC

케이、제이、티、이자형、N、아르 자형、에스、비、엘(DIN43710)、유、기음、디；mV signal: -125~125mV / -125~1100mV

Cold junction compensation: 내장(기본) / external cold junction / no compensation (B-type thermocouple recommended no compensation)

6. 일반 기술 사양

7. Complete Ordering Examples
8. TTH200-Y0

Non-explosion proof, no LCD, DIN 레일 장착; configured Pt100, range 0~200℃

2. TTH200-S1-Y1+CS

NEPSI intrinsically safe, LCD 포함, SIL2 declaration; K-type thermocouple, built-in cold junction compensation

3. TTH200-E1-Y0+H2

ATEX intrinsically safe, no LCD, polyester IP65 head housing, head mount Pt100

8. 선택 참고 사항
9. Y0/Y1 are display codes, NOT explosion-proof codes, a common confusion. For TTH200-Y0, Y0=no display; the preceding Y means non-explosion proof.
10. DIN rail installation only needs transmitter body + DIN rail clip kit, no H1/H2 head housing. H-series housings are used for sensor head mounting inside temperature probe junction box.
11. Confirm hazardous area classification (Zone/Div) and temperature class T6 for explosion-proof models; NEPSI S1 version is preferred for domestic hazardous projects.
12. Measurement range, sensor type and TAG are configuration parameters, submit in order remarks for factory pre-configuration; or configure on-site via HART communicator after delivery.
13. Cross Series Replacement Reference

TTH200: Single channel, no sensor drift monitoring (이 모델)

TTH300: Dual channel, support sensor redundancy and drift monitoring, 더 높은 성능

Legacy TTF200: 단종, direct replacement by TTH200-Y0/Y1

ABB TTH200 Full Model List (Head Mount / DIN Rail Dual Purpose Temperature Transmitter)

Model structure: TTH200-[Explosion-proof code]-[Display code] [+Additional options]

베이스 시리즈: TTH200 (single channel, HART 4-20mA); TTH300 (dual channel) in same family listed at the end for distinction

1. TTH200 Base Model List (Combination of Explosion Protection & 표시하다)

1. Additional Options (appended after any model with `+`)

Example complete order number: `TTH200-S1-Y0+CS+H2`

의미: NEPSI intrinsically safe, 디스플레이 없음, SIL2 declaration, polyester IP65 head housing

III. TTH / TTF Family Comparison (Avoid Selection Mistakes)

1. Common Technical Features of TTH200 Series
2. Universal input: RTD / TC / 오 / mV, configured in software, not coded in model number, state in order remarks
3. 2-철사: 12~42VDC, 4-20mA+HART5/HART7
4. NAMUR NE89, NE107 fault alarm
5. Two mounting forms: DIN 레일 (transmitter module only); Sensor head mount (transmitter + H-series housing kit)
6. Purchasing Remarks

Y0/Y1 always as the last segment: Y0 no display, Y1 with LCD; preceding code for explosion-proof / regional certification

H-series housing is additional option, not part of base model; H housing not required for DIN rail installation

실(CS) is compliance declaration without hardware modification; add suffix `+CS` for SIL2 safety loop application

범위, 센서 유형, TAG are configuration parameters, not embedded in model code, add to order remarks for factory pre-configuration