접촉기,회로 차단기,감지기,인코더,PLC,변환기
로크웰 오토메이션 no longer supplies new units. Items available on the market are second-hand, refurbished or spare stock. It is a classic legacy monochrome HMI of the PanelView Standard 550 시리즈.
✅ Model Breakdown
2711-T5A2L1
2711: PanelView Standard series
티: Touchscreen only (no membrane keypad)
5: 5.5-inch display
에이: Monochrome LCD (검은색 & 하얀색)
2: DH-485 communication port, no print port
L1: 24V DC power supply version
📋 핵심 기술 사양
| 목 | 명세서 |
| 표시하다 | 5.5-inch monochrome LCD, resistive touchscreen |
| 전원공급장치 | 18~30VDC, rated 24VDC; Max 12W, 0.5A@24V |
| 의사소통 | DH‑485 (for connection with legacy AB SLC500, MicroLogix PLCs) |
| 메모리 | Non-volatile memory 240KB / RAM 170KB |
| 설치 | Panel cutout mounting, front panel IP65 |
| 프로그래밍 소프트웨어 | PanelBuilder32 (legacy software, 32-bit OS only) |
| Firmware Versions | Common A series, firmware 3.30/4.41 등. |
| 작동 온도 | 0~55℃ |
| Unavailable Ports | No print port, 이더넷 없음 |
📌 Typical Applications
Legacy production line retrofits, 포장 기계, 자재 취급, 수처리, and older SLC500/MicroLogix projects. DH485 bus only, no EtherNet/IP support.
⚠️ Common Failures & 예비 부품
- Backlight degradation: Most typical fault. Spare part 2711-NL1 (CCFL backlight tube; LED backlight modification is also feasible)
- Damaged touch panel: PV550 touch membrane can be replaced separately
- 프로그램 손실: On-board coin cell battery preserves screen programs; program loss occurs once battery fails
- 통신 실패: DH485 bus termination resistor, wiring polarity, RSLinx driver issues
🔁 Replacement Options for Engineering Retrofit
Original project cannot be migrated directly, screen reconfiguration is mandatory
- Preferred direct replacement: 2711R-T4T / 2711R-T7T (패널뷰 800). Supports RS485 and connects to legacy PLCs;
- Modern alternative: 패널뷰 플러스 7 / 패널뷰 5000 series with Ethernet port;
- 3rd-party domestic HMI: Weintek / Kunlun MT, connecting legacy AB controllers via DH485/Modbus with lower cost.
📎 Supporting Documentation
수동: 2711-UM014 (PanelView Standard Terminal User Manual)
데이터시트: 2711-TD007
HS Code Reference
85287110 (Industrial touchscreen, HMI, applicable for customs declaration)
2711-T5A2L1 (패널뷰 550) Old-to-New HMI Program Migration Assessment Checklist
해당되는: Migration from legacy AB PanelView Standard 550 to PanelView 800 / 패널뷰 플러스 / 3rd-party domestic HMI
요점: PanelBuilder32 project cannot be imported into new HMI software; full reconfiguration required. This checklist is used for pre-migration risk assessment and workload estimation.
- 하드웨어 & Communication Assessment
| Assessment Item | 검사 내용 | Risk Notes |
| Original Controller Model | SLC500 / 마이크로로직스 1000/1100/1200/1500? | Legacy PLC only supports DH485; verify whether new HMI has native DH485, otherwise protocol converter required |
| 통신 프로토콜 | 원래의: DH485 | New HMI options: DH485 / DF1 / 모드버스 RTU (PLC side must support) |
| Address Mapping | Original PV550 tags: N, 비, 티, 기음, 아르 자형, F and other PLC registers | ⚠️ Register addresses must be checked line by line, do not copy by experience; distinguish bits / 단어 / floats |
| 통신 배선 | Existing DH485 bus, termination resistors, wiring polarity | New HMI communication interface differs, evaluate rewiring and additional converter workload |
| 전원공급장치 | 24VDC | Most old & new units compatible; verify terminal definition and fuse rating |
| Panel Cutout Dimension | 2711-T5A2L1 cutout: 216 × 152mm | New HMI dimension differs; evaluate: 직접 교체 / adapter plate / cabinet cutout modification |
| 설치환경 | 온도, 먼지, 진동 | Verify new HMI environmental rating and IP protection match site conditions |
- Original HMI Project Inventory (Export from PanelBuilder32)
| Assessment Item | 검사 내용 | 비고 |
| Total Screen Count | Main screen, manual mode, 경보, parameter, trend | Count screens to estimate configuration man-hours |
| Screen Element List | Buttons, 지표, numeric displays, input boxes, 선택기 스위치 | Distinguish bit read/write, word read/write, multi-state indicators |
| Alarm Information | Alarm text, trigger bit, acknowledge bit, alarm log | ⚠️ PV550 uses simple bit-triggered alarms; new HMI alarm storage capacity varies |
| Recipe Function | Recipe used or not? | PV550 recipes stored locally in HMI; re-plan recipe storage location (HMI / PLC) for new HMI |
| Trend Curves | Real-time / historical trend, sampling cycle | Legacy PV550 only supports simple real-time trend without large-capacity history logging; evaluate history storage for new HMI |
| Security Access | Password, user level, screen access permission | 오래된 & new permission models differ; recreate user accounts |
| Macro / Script Logic | PanelBuilder32 built-in macros | High risk: Macros cannot be migrated. All logic must be rewritten using new software scripts / 기능 |
| Screen Switch Logic | Screen jump buttons, conditional jump | Replicate conditional jump logic line by line |
| Print Function | This 2711-T5A2L1 model has no print port, skip this item | Evaluate printing if other models in the series are used |
| Hardcopy / Screenshot | Screen capture function required? | Configure on demand for new HMI |
III. Tag / Variable Mapping Assessment (Core Workload Item)
- Export full variable list of original project (print variable table in PB32)
- 분류 & statistics:
Boolean (Bit: 달리다, 잘못, Auto/Manual, Alarms)
Integer (Word: Setpoints, 카운터)
Float (온도, 압력)
- Verify PLC data file types: N files, B files, T/C preset values, registers
- Mark special variables:
Arrays
Indirect addressing (High risk: many new HMIs do not support legacy AB indirect addressing syntax)
Read-only / Read-write attributes
Risk note: DH485 address notation differs between HMI software packages, prone to address offset errors.
- Function Equivalence Assessment (Item-by-item comparison, mark missing functions)
| Original PV550 Function | 비고 |
| Bit buttons, momentary / latching buttons | Distinguish momentary pushbuttons (most common error source) |
| Multi-state indicators (3-상태 / multi-state) | |
| Numeric input, limit validation | PV550 local limit check; new HMI can validate on HMI side or PLC side |
| Screen jump, conditional jump | Test conditional jump logic |
| Alarm trigger, alarm acknowledge | Alarm text encoding (중국인 / 영어; legacy units mostly English) |
| Recipe read/write | Verify recipe quantity and data length |
| Real-time trend | Sampling cycle, channel quantity |
| User password permission | Password hierarchy, lock function |
| Macro logic | Decompose macro logic and implement via PLC logic or new HMI scripts |
- PLC Side Change Assessment
Whether PLC program modification is required to adapt new HMI communication
Whether spare PLC register space is available for new HMI functions (recipes, history logging)
Whether PLC firmware supports new protocols (예를 들어. DF1)
Downtime window assessment for PLC program download
- Test Plan Assessment
- Offline simulation: Simulate screens and variables in HMI software, verify addresses
- Bench test: New HMI + identical site PLC bench commissioning (recommended to reduce on-site downtime)
- Step-by-step on-site power-up test:
Communication connectivity test
All screen switching
Full button operation & indicator feedback
Parameter write / read verification
Alarm trigger & acknowledge test
Recipe read/write test
- Long-term aging test (선택 과목)
- Rollback plan: Keep old HMI, mark wiring for fast fallback in case of failure
Ⅶ. 선적 서류 비치 & Delivery Assessment
Backup of new HMI project source file
Variable cross-reference table (old tags ↔ new HMI variables)
Screen function specification document
Updated wiring diagram (HMI terminals, communication bus)
Updated site operation manual
Spare parts list (new HMI spare parts, 통신 모듈)
Ⅷ. Risk Summary & Man-hour Estimation
Fill directly into assessment form
- High-risk items: Macro logic, indirect addressing, address misalignment
- Medium-risk items: Alarm logic, recipes, communication parameter mismatch
- Low-risk items: Screen layout, static text
Man-hour reference:
10 basic screens without complex macros/recipes: estimated 1~2 working days for configuration + 테스트; projects with heavy macros, recipes, indirect addressing require double the man-hours.
- Downtime Plan Assessment
Planned downtime window duration
Wiring modification time
Commissioning time
Emergency plan & rollback scheme
Rockwell Allen-Bradley PanelView HMI Full Series List
Grouped by generation, marked【Active / Discontinued】, with supporting software and key features. Optimized for your 2711-T5A2L1 legacy screen retrofit selection
Catalog rule: 2711 = legacy classic; 2711R=PanelView800; 2711P=PanelView Plus; 2715=PanelView5000; 2800=OptixPanel
- Legacy Classic Series (모두 단종됨, second-hand/spare market; your 2711-T5A2L1 belongs here)
1.1 PanelView Standard (2711 시리즈, monochrome / early color, PanelBuilder32 software)
패널뷰 300: 2711-T3A / 2711-K3A, 3-inch monochrome, DH485
패널뷰 550: 2711-T5A2L1 / 2711-K5A2L1, 5.5-inch monochrome (당신의 모델)
패널뷰 600: 2711-T6C / 2711-K6C, 6-inch color
패널뷰 900: 2711-T9C / 2711-K9C, 9-inch color
패널뷰 1000: 2711-T10C / 2711-K10C, 10-inch color
의사소통: DH485, DF1; 이더넷 없음; Programming software: PanelBuilder32 (32-bit Windows only)
Typical faults: CCFL backlight aging, on-board coin cell causing program loss
1.2 PanelView Component (2711기음, 단종)
2711C-C200, miniature modular HMI, paired with Micro800 compact PLC, simple screens
1.3 Early Generation PanelView Plus (First-gen 2711P, 단종)
Original PV Plus, WinCE, FactoryTalk View ME, 600/700/1000/1250/1500
- Previous Generation: 패널뷰 플러스 6 (2711피, EOL Discontinued, existing installed base)
소프트웨어: FactoryTalk View 머신 에디션 (FTView ME), WinCE6.0
PV Plus6 400: 2711P-T4C / K4C, 4-인치
PV Plus6 600: 2711P-T6C / K6C, 6.5-인치
PV Plus6 700: 2711P-T7C / K7C, 7-인치
PV Plus6 1000: 2711P-T10C / K10C, 10.4-인치
PV Plus6 1250: 2711P-T12C / K12C, 12.1-인치
PV Plus6 1500: 2711P-T15C / K15C, 15-인치
Suffix explanation: T=Touch; K=Membrane Keypad; C=Color; D=DC 전력; A=AC power
- Active Classic: 패널뷰 플러스 7 (2711피, Active for Sale), 기준 / Performance versions
소프트웨어: FactoryTalk View ME; Performance version runs Win10 IoT Core, supports video, VNC, DLR ring
표준 버전: 4”,7”,10”,12”,15”
예: 2711P-T4W21D8S, 2711P-T7C21D8S, 2711P-T10C21D8S, 2711P-T12W21D8S, 2711P-T15C21D8S
Performance high-performance version: 7~19” wide screen, stainless steel enclosure, conformal coated ArmorView machine-mount type
예: 2711P-T7C22D9P, 2711P-T10W22D9P, 2711P-T15C22D9P, 2711P-T19C22D9P
- Economy Small Size: 패널뷰 800 (2711아르 자형, Active for Sale), Preferred replacement for legacy DH485 projects
소프트웨어: FactoryTalk View 800 (lightweight standalone software); 이더넷 + RS485/DF1 native support, perfect for SLC500/MicroLogix, recommended replacement for your 2711-T5A2L1
2711R-T4T: 4.3-inch touch
2711R-T7T: 7-inch touch
2711R-T10T: 10.4-inch touch
Touch-only models, 비용 효율적, popular for legacy line retrofit
- New High-End Platform PanelView 5000 (2715 시리즈, Active for Sale), for Logix5000: ControlLogix/CompactLogix
소프트웨어: Studio5000 View Designer (integrated into Studio5000, FTView ME incompatible), native EtherNet/IP for large automation projects
- 패널뷰 5310 (2713피, 기초적인): 4”,7”,10”,12”,15”
예: 2713P-T10CD
- 패널뷰 5510 (2715피, high-performance):7/10/12/15/19”, 만지다 / keypad hybrid
예: 2715P-T7CD, 2715P-T10CD, 2715P-T15CD
⚠️Critical reminder: PV5000 project is fully incompatible with PanelView Plus projects, screen migration impossible
- 신세대: OptixPanel (2800 시리즈, Rockwell new HMI, Active for Sale)
Successor to PanelView 800 선, Compact and Standard models, FactoryTalk Optix software, native IoT & edge visualization
OptixPanel Compact (2800기음): 2800기음-070AS-1S (7-인치)
OptixPanel Standard (2800에스):7/10/12/15-인치
Designed for new projects, weak native DH485 serial support, not recommended for direct replacement of legacy 2711 스크린
- Mobile Handheld HMI: MobileView (2711티)
Cabled pendant handheld operator terminal for machine-side operation, 2711T series, partial models available.
- Industrial Panel PC (Not pure touchscreen, industrial all-in-one PC, ASEM series)
6300피, 6300M series industrial panel PCs, 윈도우 OS, for local advanced SCADA operation
Series Selection Comparison Table (Quick reference for retrofit projects)
| 시리즈 | Catalog Number | 수명주기 | 구성 소프트웨어 | 응용 시나리오 |
| PanelView Standard | 2711 | 단종 | PanelBuilder32 | Legacy spare part maintenance (2711-T5A2L1) |
| PanelView Plus6 | 2711피 | 단종 | FTView ME | Spare parts for existing installed base |
| PanelView Plus7 | 2711피 | 활동적인 | FTView ME | 중간 & large production lines, compatible with legacy FT projects |
| 패널뷰 800 | 2711아르 자형 | 활동적인 | FTView800 | ✅Legacy DH485 line retrofit, replace 2711-T5A2L1 |
| PanelView5000 | 2713P/2715P | 활동적인 | Studio5000 View Designer | Large Logix5000 projects |
| OptixPanel | 2800 | 활동적인 | FactoryTalk Optix | 새로운 프로젝트, IoT visualization |
General Suffix Definition (Rapid model decoding)
T = Touch only; K = Keypad membrane; B = Touch + Keypad combined
C = Color LCD; A=Monochrome
D = 24VDC supply; A=AC100-240V
W = Wide screen; P = Performance high grade
S = Standard grade
Key Project Migration Tips (Continued from your 2711-T5A2L1 migration assessment)
- 2711 (PV Standard) → 2711R PanelView800: 추천, supports RS485/DF1 for SLC500/MicroLogix, moderate cost; screens must be reconfigured, PB32 project cannot be imported
- 2711 → PanelView Plus7: Also feasible, requires DF1 / serial communication module
- 2711 → PanelView5000: Not recommended for legacy DH485 retrofit. Software fully different, extra gateway required for serial port, heavy engineering workload
