Hakko MONITOUCH V810iCN-080 HMI

The V8 series HMI is discontinued. It is widely used on legacy equipment (e.g., Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen.

Model Code Definition

V810: V8 series, 10.4-inch model

i: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port)

C: Standard VGA (640×480) economy version

N: Analog resistive touch panel

080: DC24V power supply variant (suffix D also stands for DC24V; AC models have no such suffix)

Core Hardware Specifications

Display: 10.4″ TFT color LCD, 640×480 VGA, 65,536 colors

Touch type: Analog resistive touch

Backlight: LED, rated service life approx. 70,000 hours

Memory: 4.5MB FROM for screen storage; 128KB SRAM (for recipes & alarm logs)

Front panel protection: IP65 (with original waterproof gasket), rear side IP20

Overall dimensions: 303.8 × 231.0 × 69.0 mm

Panel cutout size: 289.0 × 216.2 mm (+0.5/-0 tolerance)

Rear Interface List

1. LAN RJ45: 10/100Mbps Ethernet
2. MJ1, MJ2 (8-pin modular): RS232/485
3. D-Sub9 (CN1): RS232C / RS422/485
4. USB-A (Host), USB-B (Programming slave port)
5. CF card slot (legacy CF card, not SD card)
6. 24VDC power terminal block

Note: V810iCN does NOT support GU video/RGB optional modules

Software & Communication

Programming software: V-SFT-5 / V-SFT-6 (V-SFT6 supports V8, V9 and V10 series simultaneously)

8-way multi-protocol communication: Connect up to 8 PLCs of different brands simultaneously (Mitsubishi, Siemens, Omron, Delta, temperature controllers, inverters, etc.)

Supported functions: Alarms, trend graphs, recipe management, macro scripts, PLC ladder transfer, USB printing, CF card backup for screens & logs

Replacement Options (Discontinued Model Upgrade)

1. Official Series Upgrade: V1010iC (10.4-inch, identical cutout; project conversion via V-SFT automatic tool) – Top priority for direct replacement
2. Domestic HMI Replacement: 10.4-inch local HMIs. Requires redeveloping project screens and reconfiguring communication protocols.

Important reminder: V8→V10 project conversion is irreversible. Always back up the original project before conversion.

Common Faults & Maintenance Tips

Typical failures: Unresponsive touch, touch offset, black screen, backlight failure, communication loss, unreadable CF card

Spare parts: Touch panel, LED backlight, power board, CF card, backup battery for SRAM

Maintenance note: Legacy CF cards are difficult to source. Use USB for program upload/download whenever possible.

Hakko MONITOUCH V8 Series (Hakko Electronics / Fuji Electric) Full Model List

The entire V8 series is end-of-life (EOL).

Suffix Explanation

i: Built-in LAN Ethernet port; no i = no Ethernet port

S: High-performance model, supports GU RGB video optional modules

T: Mid-range model

C: Standard economy model (V810iCN belongs to this branch)

M: Simplified model exclusive to V806

CH: 7.5-inch handheld type

X: 15-inch XGA high-end model

N: Analog resistive touch; D / 080: DC24V power supply

5.7-inch | V806 Series (320×240 QVGA)

V806M / V806iM

V806C / V806iC

V806T / V806iT

Power variants: V806iCD, V806iTD, V806iMD (DC24V)

7.5-inch | Handheld Model V808CH

V808CH / V808iCH

8.4-inch | V808 Series (640×480 VGA)

V808C / V808iC

V808S / V808iS

Power variants: V808iCD, V808iSD (DC24V)

10.4-inch | V810 Series (640×480 VGA, your target model here)

V810C / V810iC (Economy version; V810iCN-080 falls here; iC version cannot install GU video modules)

V810T / V810iT (Mid-range, supports GU optional units)

V810S / V810iS (High-performance, supports GU video/RGB modules)

Suffix variants: N (resistive touch), D/080 (DC24V), e.g., V810iCN, V810iTN, V810iSN

12.1-inch | V812 Series (800×600 SVGA)

V812S / V812iS (High-performance, supports GU video modules)

15-inch | V815 Series (1024×768 XGA)

V815iX (V8 series flagship; Ethernet + video input)

Function Comparison Table

Optional Units (For V8i models with expansion port, excluding V810iC)

GU-00/01/02/03/10/11: RGB video input units; DUN-10: V806 dedicated expansion unit

Software & Replacement

Programming software: V-SFT5 / V-SFT6

Official upgrade series: V10 series (V1010iC is the preferred drop-in replacement for V810iCN, same cutout size; one-click project conversion in V-SFT6)

Replacement Model List for V810iCN-080 (Hakko MONITOUCH)

Key specs of original unit: 10.4-inch, DC24V, built-in Ethernet, economy grade, no video expansion port, cutout size: 289.0 × 216.2 mm

1. Original Brand Upgrade (First Choice: Project Migration, No Cutout Modification)

(1) V10 Series (Current Fuji/Hakko Mainstream, Official Recommended Replacement)

V1010iC-D (Top Pick)

✅ Identical panel cutout; no cabinet modification required. V-SFT6 automatically converts V8 project files.

✅ Equipped with LAN, serial ports and USB; SD card replaces legacy CF card.

⚠️ Resolution upgraded from 640×480 to 800×600; screens auto-scale with minor control adjustments needed. Converted projects cannot be opened again on V8 software.

V1010iS-D (High-end Alternative)

Supports video input with higher performance, same cutout dimensions for future video expansion needs.

(2) V9 Series (Transitional Discontinued Model, Only Stock Available)

V9100iC (Official designated replacement for V810iC series)

Project migration via V-SFT6. Stock availability is limited; not the first choice.

(3) V8 Series Spare Replacement (Only for Used Secondhand Parts, Not for New Purchases)

V810iTN-080 / V810iSN-080

Same outline & cutout size; extra video expansion port. The original V810iCN cannot fit GU modules, while iTN/iSN support video add-ons. Project files can be downloaded directly without modification.

2. Domestic HMI Replacement (Project Reconfiguration Required)

Selection criteria: 289×216mm cutout, 10.4-inch, DC24V, Ethernet + RS485/232 ports

Weintek: MT8106iP / MT8106iE (Check cutout carefully; adapter plate may be needed)

Kunlun Tongtai: TPC1061Ti (Verify cutout dimensions)

Kinco / Xinje: Most 10.4-inch high-end models require custom adapter panels or cabinet re-cutting.

Disadvantage: V-SFT project files cannot be imported directly; full re-configuration and communication debugging required.

Selection Comparison Table

Critical Migration Notes

1. Back up the original V8 project file before conversion; V8→V10 conversion is irreversible.
2. Recipes and alarm logs stored on the original CF card must be exported and imported separately after migration.
3. Communication protocols (Mitsubishi MC, Siemens S7, Omron Hostlink, etc.) are fully compatible with V10; protocol parameters remain almost unchanged.
4. Terminal pin assignments, 24V power and serial pinouts differ. Always cross-check the V10 manual before wiring.