Eaton PKZM0-16 Motor-Protective Circuit Breaker

Pedido nº.: 046938

Part of Moeller PKZM0 series; 3-pole rotary-knob disjuntor do motor integrating overload & proteção contra curto-circuito, Aula 10 característica de viagem, with built-in phase-failure protection.

✅ Core Technical Parameters

Poloneses: 3P

Adjustable current setting range: 10~16A

Tensão operacional nominal Ue: Máx.. AC 690 V

Potência do motor correspondente (AC-3, 50 Hz):

230 V: 4 kW

400 V: 7.5 kW

440 V: 9 kW

Instantaneous short-circuit trip current: Fixado em 248 UM

Classe de viagem: Aula 10

Rescisão: Terminais de parafuso

Classe de proteção: IP20 (front touch-safe)

Dimensões gerais: W45 mm × H93 mm × D76 mm

Resistência elétrica: 100,000 operações

Padrões: IEC/EN 60947-4-1, VDE, UL508, CE, Certificado CSA

✅ Key Features

1. Sensitive phase-failure protection; trips rapidly on single phasing to prevent motor burnout.
2. Rotary knob with padlock provision for lockout/tagout (CORAÇÃO) safety isolation.
3. Built-in TEST pushbutton for manual mechanical trip testing.
4. Wide range of add-on accessories: contatos auxiliares, fault trip contacts, liberação de subtensão, viagem de manobra, side busbars.
5. Montagem em trilho DIN; projeto modular, directly combinable with DILM contactors to form MSC motor starter units.

✅ Variants with Suffixes (Same Current Rating)

PKZM0-16: Standard screw terminals (Número do pedido. 046938)

PKZM0-16-EA: EA export version

PKZM0-16-SPI32: Screw terminals on line side, push-in spring terminals on load side

PKZM0-16-GVP2: Bulk packaging version

✅ Seleção & Equivalent Cross Reference

Domestic equivalents: Delixi CDP6-16, Chint NS2-25 (10–16 A)

Next higher rating in series: PKZM0-20 (16～20 A)

Observação: PKZM0 is an integrated breaker; it cannot be used solely as an overload relay. Use ZB series if only thermal overload protection is required.

✅ Troubleshooting Guide

1. Trips immediately with no load: Check if current setting is too low, perda de fase, or mechanical trip mechanism jamming.
2. Instant trip on motor startup: Short-circuit protection triggered; inspect motor winding short-circuit or cable fault.
3. Slow trip under sustained overload: Normal Class 10 inverse-time behaviour; if tripping frequently under heavy load, increase the current setting or upgrade to a higher-rated model.

Full Accessory List for PKZM0 Series (Applicable to PKZM0-16)

Regra de instalação: NHI-E = front-mounted; NHI = side-mounted; AGM = fault trip contact; U-PKZ0 = undervoltage release; A-PKZ0 = shunt trip. Suffix -PI = push-in spring terminals; no suffix = screw terminals.

1. Contatos Auxiliares Padrão (Main contact status feedback: closed/open signal)
2. NHI-E-10-PKZ0｜1NO, montado na frente
3. NHI-E-01-PKZ0｜1NC, montado na frente
4. NHI-E-11-PKZ0｜1NO+1NC (mais comum), montado na frente
5. NHI11-PKZ0｜1NO+1NC, montado lateralmente
6. NHI21-PKZ0｜2NO+1NC, montado lateralmente
7. NHI12-PKZ0｜1NO+2NC, montado lateralmente

PI version available: NHI-E-11-PKZ0-PI (terminais de mola)

Avaliação: AC-15 230 V 0.5 UM, DC-13 24 V; used for PLC feedback and status indication lamps.

2. Fault Trip Contacts (Only actuated on protective trip – critical distinction!) AGM Series

Only changes state when tripped by overload / curto-circuito / perda de fase; remains inactive during manual ON/OFF operations, used exclusively for fault alarm signals.

1. AGM2-01-PKZ0｜2NC (standard for engineering projects)

PKZM0 Full Model List

1) Standard Screw Terminal Models (Base Version, Sem sufixo)

Definição de sufixo (Mesma classificação atual, only terminal/function differs)

1. -PI: Push-in spring terminals (fiação sem ferramentas); exemplo: PKZM0-16-PI
2. -C: Older spring clamp version (same function as PI)
3. -EA: Export overseas standard model (identical construction to domestic standard version)
4. -T: Transformer protection variant (NO phase-failure protection, only thermal + disparo de curto-circuito); exemplo: PKZM0-0,63-T
5. /E: Thumb-lock rotary handle, field padlockable
6. -SPI32: Mixed terminals: line-side screw, load-side push-in

2) PKZM01 Compact Series (Alça de alternância, NO phase-failure protection; only overload + disparo de curto-circuito)

Observação: PKZM01 has no phase-loss protection; only for small motors without single-phasing risk.

3) Higher-Current PKZM4 Series (16～63 A, fully interchangeable accessories with PKZM0)

PKZM4-16 / PKZM4-20 / PKZM4-25 / PKZM4-32 / PKZM4-40 / PKZM4-50 / PKZM4-63

4) Regra de nomenclatura de modelo (Seleção rápida)

PKZM0 16 PI

1. PKZM0 = Motor-protective circuit breaker (with phase-failure protection, manopla rotativa)
2. Numeric value = Maximum adjustable current (16 = 10~16 A)
3. Suffix = Terminal type / special function

5) Standard Accessory List (Fits all PKZM0 variants)

1) Contatos Auxiliares (Position feedback)

NHI-E-11-PKZ0 (Montado na frente: 1NÃO+1NC)

NHI11-PKZ0 (Montado lateralmente: 1NÃO+1NC)

2) Fault Trip Contacts (Only triggered by overload/phase loss/short-circuit)

AGM2-01-PKZ0 (2NC, standard for site engineering)

3) Voltage Releases (Only one can be fitted at a time, not both together)

U-PKZ0 Undervoltage release (24CCV / 110V / 230V / 400V)

A-PKZ0 Shunt trip release (24CCV / 110V / 230V / 400V)

4) Mechanical Accessories

PKZ0-XRH: Extended rotary handle for cabinet door mounting (padlockable)

CL-PKZ0: Phase barrier

B-PKZ0: Parallel busbar for multiple units

6) Diretrizes de seleção

1. Require phase-failure protection → Choose PKZM0; No phase-loss risk & cost-sensitive → Choose PKZM01.
2. Remote tripping → Select A-PKZ0 shunt trip; Anti-restart on power failure → Select U-PKZ0 undervoltage release (cannot mount both).
3. Frequent on-site wiring → Prefer -PI push-in terminal version; General installation → Standard screw terminal model.