IFM IIT205 IFM Inductive Proximity Sensor

Código do pedido: IIT205 (IIB3014BBPKG/V4A/US-104)

Hygienic M30 flush-mount inductive sensor, especialmente concebido para alimentos, beverage and pharmaceutical applications with cleaning cycles

✅ Key Specifications

Dados elétricos

Tensão de alimentação: 10…30 V DC

Saída: PNP normalmente aberto (NÃO), 3-arame

Rated sensing distance Sn: 14 milímetros, montável embutido

Effective sensing range: 0～11.34 mm; tolerance ±10%

Frequência de comutação: 100 Hz

Corrente de saída contínua: 100 mA

Queda de tensão: ≤2,5V

Corrente sem carga: 10 mA@24VDC

Proteção: proteção contra polaridade reversa, proteção pulsada contra curto-circuito, proteção contra sobrecarga

Histerese: 1～20% Sr; switching point shift: -10～+10% Sr

Metal Reduction Factors (Importante)

Aço=1; Aço inoxidável=0,7; Brass=0.5; Aluminium=0.4; Copper=0.3

Mecânico & Dados Ambientais

Habitação: M30×1,5, overall length L=50 mm

Montagem: Montagem embutida

Classe de proteção: IP68 / IP69K (capacidade de lavagem de alta pressão)

Temperatura ambiente: 0 … +100 ℃

Peso: 103.9 g

Material de habitação: V4A stainless steel, gold-plated contacts, resistant to repeated exposure to cleaning agents

Indicador: Multi-directional yellow LED for switching status

Certificações: CE, cULus, EAC, suitable for food industry

📌 Model Code Explanation

IIT205 = IIB3014BBPKG/V4A/US-104

II: Inductive sensor

B: Cylindrical threaded housing

30: M30 thread

14: Distância de detecção nominal 14 milímetros

B: Montagem embutida

B: PNP normalmente aberto

PKG: M12 4-pin plug connection

V4A: Carcaça de aço inoxidável

US-104: Hygienic high-temperature version

🛠️ Application Fields

Maquinaria alimentar, linhas de enchimento, equipamento farmacêutico, washdown stations, metal target detection under frequent CIP/SIP high-pressure cleaning and high-humidity high-temperature conditions; suitable for level detection, metal workpiece presence check and cylinder position feedback.

⚠️ Seleção & Diretrizes de instalação

1. Montagem embutida: The sensor face can be recessed into metal brackets; the surrounding metal of the mounting surface will not reduce the sensing distance.
2. Carcaça de aço inoxidável + Classificação IP69K, resistant to alkaline cleaners and hot high-pressure washdown; NOT suitable for long-term immersion in concentrated strong acids.
3. Reduction factor <1 for non-ferrous metals; sensing distance is significantly reduced for aluminium/copper targets, permitir margem suficiente durante a seleção.
4. Switching frequency only 100 Hz, not applicable for high-speed counting.
5. M12 4-pin male plug wiring: Marrom(+24V), Azul(0V), Preto(Saída de sinal PNP), Branco (não utilizado).

🧩 Replacement References

Mesma série: IIT202 (8 mm distância de detecção, M30 hygienic type)

Alternativas domésticas: M30 flush stainless steel PNP NO inductive proximity sensor; verificar 14 mm sensing distance and 0~100 ℃ temperature range.

📋 Troubleshooting Checklist

1. Sem sinal: Check if 24V power is supplied to brown and blue wires. Reverse polarity will not damage the sensor but causes no operation.
2. No output when target approaches: Check target material (distance reduction for Al/Cu); verify flush fit with mounting metal.
3. Falso acionamento: Metal debris on sensing face; poor shield grounding of cable.
4. Intermittent failure after hot washdown: Inspect plug sealing and ensure connector watertightness.

IFM IIT205 (IIB3014BBPKG/V4A/US-104) Casos de aplicação

> Core selection criteria: Hygienic M30 flush, IP68/IP69K, 316eu(V4A) aço inoxidável, 0~100 ℃, compatible with CIP/SIP high-pressure cleaning, PNP NÃO, 14 mm flush sensing distance; 100 Frequência de comutação Hz, for static/low-speed position detection only, not for high-speed counting.

Caso 1: Beverage Filling Line – Spool Position Feedback for Filling Valves (Beer / Mineral Water / Dairy)

Condição de trabalho: Filling valves undergo CIP hot water + alkaline detergent high-pressure spray, wide temperature cycling from 0~95 ℃, humid mist environment.

Função: Mounted on hygienic pneumatic valve bodies to detect metal spool rod position. PLC confirms valve fully open / fully closed to prevent empty filling or overflow.

Why IIT205

1. IP69K withstands 80~100 bar high-pressure spray and Ecolab food-grade cleaners; 316L stainless steel housing without hygienic dead zones, flush installation prevents product residue buildup.
2. 0~100 ℃ withstands thermal shock; no signal drift during CIP hot cleaning.
3. 14 mm sensing distance accommodates spool stroke tolerance; flush mounting ensures valve body metal does not reduce detection range.

Notas: For stainless steel spools, reduction factor =0.7, reserve sufficient effective sensing distance; only for position confirmation, not high-speed pulse counting.

Caso 2: Metal Baffle / Metal Float Level Detection on Aseptic Tanks for Dairy Products

Condição de trabalho: Aseptic tanks for fresh milk/yogurt, periodic SIP steam sterilization, humid brackets on tank exterior, acid/alkaline cleaning cycles.

Função: Detect metal float to trigger high/low level alarms, start/stop feeding to prevent overflow or dry-run of tank.

Pontos-chave: Sensor flush-recessed into stainless steel bracket, no hygienic dead corners; PEEK sensing face resistant to hot steam; M12 plug for quick disassembly during equipment cleaning.

Caso 3: Metal Tray Presence Detection for Food Packaging Machines (Meat / Ready Meal Packaging Lines)

Condição de trabalho: Conveying stainless steel trays continuously; hot water washdown between stations, high humidity and splashing food debris.

Função: Verify stainless steel tray arrival; trigger sealing/vacuum forming upon detection; lock mold closing if no tray present to protect tooling.

Selection Benefits: Flush installation prevents damage from tray scraping; stainless steel housing resists food cleaning fluid corrosion; multi-directional yellow LED for status inspection after washdown.

Caso 4: Hygienic Cylinder End-position Detection for Pharmaceutical Equipment (Comprimido / Powder Production Lines)

Condição de trabalho: GMP cleanroom, actuators require periodic high-temperature disinfection and detergent rinsing; no grooves allowed to trap contaminants in clean areas.

Função: Installed at the end of hygienic cylinders to detect metal stop block on piston, feedback extend/retract end-position signal for interlocking of subsequent processes.

Pontos-chave: Gold-plated contacts for stable operation in humid clean environments; comida & pharmaceutical hygienic compliance; M12 4-pin plug for fast spare part replacement.

Caso 5: Metal Workpiece / Fixture Presence Confirmation for Meat Processing Cutting Lines

Condição de trabalho: Alta umidade, heavy foam and alkaline degreaser high-pressure washdown, wide ambient temperature fluctuation.

Função: Detect presence of stainless steel work fixture; lock cutting blade if fixture not in position to avoid collision and implement safety interlock.

Limitações: For aluminium fixtures, sensing distance reduced to 0.4 vezes; sufficient margin must be reserved during selection; not suitable for high-speed reciprocating motion.

Caso 6: Metal Baking Tray Detection at Bakery Line Discharge

Condição de trabalho: Oven outlet, high ambient temperature up to nearly 100 ℃, oil-contaminated trays, high-pressure hot water cleaning per shift.

Função: Detect stainless steel baking trays arriving at unloading station to start/stop conveyor belt.

Benefícios: Wide temperature range 0~100 ℃, oven residual heat will not damage sensor; IP69K allows direct washdown of grease; stainless steel housing resistant to oil corrosion.

❌ Non-suitable Applications (Pitfall Reminder)

1. High-speed counting, high-speed dynamic metal target detection: apenas 100 Frequência de comutação Hz, pulse loss occurs at high speed.
2. Long-term immersion in concentrated strong acids: only resistant to weak acid/alkaline rinsing, not continuous concentrated acid soaking.
3. Thin copper foil or thin aluminium sheet: heavy reduction of sensing distance, prone to misjudgement.
4. Installed near high-power inverters with strong magnetic/electromagnetic interference; shielded grounding required separately.

Instalação Geral & Diretrizes de Comissionamento (Aplicável a todos os casos)

1. Flush-recess into metal bracket, sensor head flush with metal surface.
2. Preferred target material: aço carbono, followed by 304/316 aço inoxidável; calculate effective sensing distance in advance for aluminium/copper targets.
3. Use matching hygienic watertight M12 connectors; connector area is the highest failure point during washdown.
4. Perform CIP cleaning test after installation, check LED status to confirm no intermittent false triggering.

IFM IIT Series (M30 Hygienic Inductive Proximity Sensors) Lista de modelos

> Series common features: M30×1.5 thread, V4A/316L stainless steel housing, IP68/IP69K, CIP/SIP washdown resistant, 0~100 ℃, M12 4-pin plug, comida & pharmaceutical hygienic grade; IIT205 is the flagship model of this series

Related IT Family (M8/M12/M18 hygienic sensors, same technology platform for reference selection)

IET Series: M8 hygienic (IET201)

IFT Series: M12 hygienic (IFT201, IFT259, IFT260)

IGT Series: M18 hygienic (IGT201, IGT204, IGT261, IGT262)

Series Selection Differentiation

1. IIT202 / IIT205 / IIT206: IIB prefix, Face de detecção PEEK, PEEK front face, econômico, highest volume in food industry; switching frequency 100Hz, only for static/low-speed position feedback, sem IO-Link.
2. IIT228 / IIT244 / IIT245 / IIT246: IIK prefix, solid 316L metal sensing face, no PEEK plastic, superior chemical cleaning resistance; IIT244 supports IO-Link communication, real-time distance reading and remote NO/NC switching via PLC.
3. Montagem embutida: Sensor head can be recessed in metal bracket, surrounding metal will not reduce sensing distance. Non-flush mount: Keep clearance, não pode ser embutido em metal.

Guia de seleção rápida

Standard M30 hygienic position detection, 14 mm requirement: IIT205

Short range 8 milímetros: IIT202

IO-Link communication and remote parameter setting required: IIT244

Longer flush sensing distance 18 milímetros: IIT245

25 mm long range, non-flush installation acceptable: IIT246

Notas Suplementares

Todos os modelos: 10~30VDC supply; M12 4-pin male plug; gold-plated contacts for high stability in humid washdown environments

Metal reduction factors: Aço=1, 316 stainless steel=0.7, Aluminium=0.4, Copper=0.3; calculate reduced range for Al/Cu targets during selection