Siemens 6ES7 288-3AM06-0AA0

According to the Siemens product naming rules, the model 6ES7 288-3AM06-0AA0 belongs to the analog output module of the SIMATIC S7-200 SMART series. The detailed information of this module is as follows:

1. Informações básicas do produto

Série: S7-200 SMART expansion module

Tipo: Módulo de saída analógica

Ordering Number: 6ES7 288-3AM06-0AA0

Abbreviation: EM AM06 (It may be identified by this abbreviation in some materials)

2. Funções e parâmetros principais

Channel Specifications

Número de canais de saída: 2 analog output channels (Observação: O “06” in the model may be easily misinterpreted. In the actual AM series modules of S7-200 SMART, AM06 does not refer to the number of channels. It should be subject to the official data. For typical similar modules, such as AM03 which has 2AI+1AO, AM06 may have 2 canais de saída analógica independentes, and it needs to be confirmed in combination with the manual).

Output Signal Types

– Tensão: ±10V, 0-5V, 0-10V, 1-5V

– Atual: 0-20mA, 4-20mA

Output Precision

– Voltage mode: 12-resolução de bits

– Current mode: 11-resolução de bits

Características Elétricas

Fonte de energia: Powered by the S7-200 SMART CPU through the expansion bus (nenhum módulo de energia adicional é necessário).

Isolation Characteristics: The channels are not isolated, and the module is isolated from the CPU (enhanced anti-interference ability).

Communication and Connection

Connection with CPU: Directly connect to the CPU or other expansion modules (such as signal boards, módulos de sinal) through the expansion bus interface on the side of the module.

Método de fiação: Terminal block wiring, and detachable terminals are supported (convenient for maintenance).

3. Cenários de aplicação

Controle Industrial: Suitable for scenarios requiring analog output, such as adjusting the frequency of frequency converters, controlling servo drivers, driving analog signal sensors, etc..

System Expansion: Used in conjunction with S7-200 SMART CPUs (such as ST20, ST30, SR40, etc.) to expand the analog control capability of the system.

4. Installation and Configuration

Método de instalação: Instalação ferroviária (Trilho DIN, in line with IEC standards).

Software de programação: Use STEP 7-Micro/WIN SMART for configuration and programming, and intuitive wizard configuration of output signal types and ranges is supported.

5. Precauções

Compatibilidade: Only applicable to S7-200 SMART series CPUs, and cannot be used mixedly with the S7-200 classic series or other Siemens PLC series.

Signal Range Setting: The output signal type needs to be set through software or hardware configuration (such as the range card) on the module to ensure matching with external devices.

Manual Inquiry: Due to possible slight differences in different versions of the module, it is recommended to download the product manual of 6ES7 288-3AM06-0AA0 from the official Siemens website to obtain the latest technical parameters and wiring diagrams.

Resumo

This module is a key component for realizing analog output control in the S7-200 SMART system. It is suitable for small and medium-sized automation systems, supports multiple standard analog signal outputs, has flexible configuration, and is easy to integrate. For more detailed technical parameters (such as dimensions, power consumption, certification information), it is recommended to visit the official Siemens Industrial website or contact the supplier to obtain official materials.

Specific Technical Parameters of Siemens 6ES7 288-3AM06-0AA0

The following are the specific technical parameters of Siemens 6ES7 288-3AM06-0AA0 (SIMATIC S7-200 SMART analog input/output module EM AM06), sorted out based on official manuals and reliable technical materials:

1. Parâmetros elétricos principais

Channel Specifications:

Entrada Analógica (IA): 4 canais, supporting voltage/current signals

Saída Analógica (AO): 2 canais, supporting voltage/current signals

Input Signal Types:

Tensão: ±10V, ±5V, ±2.5V, 0-5V, 0-10V, 1-5V

Atual: 0-20mA, 4-20mA

Output Signal Types:

Tensão: ±10V, 0-10V

Atual: 0-20mA, 4-20mA

Resolução:

Entrada: 12-pedaço (voltage mode) / 11-pedaço (current mode)

Saída: 11-pedaço (voltage/current mode)

Precisão:

Entrada de Tensão: ±0.3% FS (typical value)

Entrada atual: ±0.6% FS (typical value)

Saída de tensão: ±0.5% FS (typical value)

Saída atual: ±0.5% FS (typical value)

2. Fonte de alimentação e consumo de energia

Fonte de energia:

Barramento de backplane: CC 5 V (powered by the CPU, typical current 80mA)

External Power Supply: CC 24V (-15%/+20%, typical current 60mA)

Power Loss: Approximately 2W (sem carga)

3. Características Físicas

Dimensões: 45milímetros (largura) × 100 mm (altura) × 81mm (profundidade)

Peso: Approximately 173.4g

Método de instalação: 35mm instalação em trilho DIN (em conformidade com a IEC 60715 padrão)

4. Signal Processing and Isolation

Input Impedance:

Voltage Mode: 9MΩ (±10V/±5V/±2.5V range)

Current Mode: 250Oh (0-20mA range)

Output Load:

Saída de tensão: ≥1kΩ (minimum value)

Saída atual: ≤500Ω (maximum value)

Isolation Characteristics:

Between Channels: Not isolated

Module and CPU: Isolated (500V e, 1 minuto)

5. Condições Ambientais

Temperatura operacional: 0°C to +55°C (padrão), and some materials mention an extended temperature range of -25°C to +60°C (needs to be confirmed in combination with the manual)

Temperatura de armazenamento: -40°C a +70°C

Umidade: 5% para 95% (sem condensação)

Nível de proteção: IP20 (à prova de poeira, protection against vertical dripping water)

6. Certificação e Conformidade

Certificação CE: Complies with the EU Low Voltage Directive (LVD) e compatibilidade eletromagnética (EMC) padrões

Certificação RoHS: Complies with the EU RoHS environmental protection directive

Outras certificações: Some suppliers mention the 3C certification (China), but the UL/cUL certification is not clear (needs to contact the official for confirmation)

7. Diagnosis and Communication

Diagnosis Function:

– Power supply voltage monitoring, disconnection detection, proteção contra curto-circuito

– Luzes indicadoras de status LED (input/output status)

Interface de comunicação: Directly connect to the S7-200 SMART CPU through the expansion bus, and programming with STEP 7-Micro/WIN SMART is supported

8. Wiring and Configuration

Tipo de terminal: Detachable spring terminals (supporting 0.2-1.5mm² wires)

Signal Range Setting: Configured through software or a hardware range card

Filter Level: Parametrizável (1x, 4x, 16x, 32x cycle time)

9. Compatibilidade

Applicable CPUs: Only supports the S7-200 SMART series (such as SR20, ST30, CR40, etc.), and cannot be used mixedly with the S7-200 classic series

Capacidade de Expansão: A single CPU supports a maximum of 8 expansion modules

10. Aplicações Típicas

Controle Industrial: Frequency adjustment of frequency converters, servo drive control, analog sensor signal processing

Process Automation: Monitoring and adjustment of analog quantities such as temperature/pressure/flow

Small and Medium-sized Systems: Realize human-machine interaction in conjunction with the SMART LINE touch screen

Precauções

1. Channel Matching: The input/output signal types need to be strictly matched with external devices to avoid overloading.
2. Especificação de fiação: Shielded cables should be used for analog signals, and keep away from power lines to reduce interference.
3. Atualização de Firmware: It is recommended to download the latest manual from the official Siemens website to confirm the compatibility of the module and CPU firmware versions.