ABB ACS580-01-087A-4 Variator de frecvență

The ACS580-01-087A-4 is a standard wall-mounted single drive unit din ABB’s ACS580 series, nominal pentru intrare trifazată de 380–480 V AC. Această serie de unități oferă o funcționare ușor de utilizat, fiabilitate ridicată și eficiență energetică superioară ca avantaje de bază. Multiple standard built-in functions eliminate the need for extra optional components, enabling rapid commissioning and deployment. Widely compatible with general industrial loads such as pumps, fani, conveyors and mixers, it is the preferred solution for light industry, building HVAC, water treatment and other applications.

Breakdown of Model Code

Per ABB official naming convention, each segment of the model designation is defined as follows:

ACS580: Identificator de serie de produse, representing ABB’s general-purpose standard drive series covering power ratings from 0.75kW to 500kW

-01: Construction type, standing for wall-mounted standard single drive. Standard equipment includes IP21 enclosure rating, Assistant Control Panel, built-in Class C2 EMC filter, Oprire sigură a cuplului (STO), braking chopper and triple-protection coated circuit boards

-087O: Rated output current marking, indicating the nominal rated output current of the drive is 87A

-4: Clasa de tensiune, denoting three-phase 380V–480V AC input, compatible with 50/60Hz mains power grids

Specificații tehnice de bază

Evaluări electrice

Parametru	Caietul de sarcini	Observații
Interval de tensiune de intrare	3-phase AC 380V ~ 480V	Tolerance: +10% / -15%
Frecvența de intrare	50/60Hz	Tolerance: ±5%
Curent nominal de ieșire	87O	Nominal value for light-duty applications
Puterea motorului egală (Lucrări ușoare)	45kW	Pentru sarcini cu cuplu variabil (fani, pompe de apa)
Puterea motorului egală (Greutate)	37kW	For constant-torque loads (transmiterea, mixing)
Output Frequency Range	0 ~ 500Hz	Supports high-speed motor operation
Input Power Factor	≥0.98	High power factor across full power range
Overall Efficiency	≥98%	At rated operating conditions
Capacitate de suprasarcină	150% curent nominal pentru 60 de secunde	One overload cycle permitted every 10 minute
Capacitate de suprasarcină	110% rated current continuously	One overload cycle permitted every 10 minute

Controla & Specificațiile interfeței

Motor Control Modes: Scalar V/F control, control vectorial fără senzori; compatible with induction motors, permanent magnet synchronous motors and synchronous reluctance motors

Dimensiuni fizice & Environmental Specifications

Dimensiunea cadrului: R5

Dimensiuni generale (H × W × D): 896mm × 345mm × 293mm

Greutate netă: Aproximativ. 23kg

Enclosure Rating: IP21 (standard); IP55 high-protection version available as option

Tip de montare: Wall mounting, side-by-side compact installation supported

Temperatura ambiantă de funcționare: -15℃ ~ +50℃ (reducerea nominală necesară peste 40℃)

Depozitare & Transport Temperature: -40℃ ~ +70℃

Umiditatea relativă: 5% ~ 95%, necondens

Altitude Rating: Full power output up to 1000m; 1% power derating per additional 100m above 1000m

Cod HS: 85044088

Configurație standard & Accesorii optionale

Factory Standard Equipment

ACS-AP-S Assistant Control Panel (Chinese language supported)
Built-in Class C2 EMC Filter
Integrated Braking Chopper
Oprire sigură a cuplului (STO) Funcţie
Triple-protection Coated Printed Circuit Boards
Bottom Cable Entry Compartment
Multilingual Quick Installation & Manual de punere în funcțiune

Common Optional Accessories

Enclosure Upgrade: IP55 protective enclosure, flange mounting kit

Communication Extensions: Fieldbus adapters including Profibus DP, Profinet IO, EtherNet/IP, Modbus TCP

Electrical Options: Input reactors, output reactors, du/dt filters, sine-wave filters, braking resistors

Functional Extensions: I/O expansion modules, temperature sensor interface cards, NETA-21 remote monitoring module

Software Tools: Drive Composer professional commissioning software

Scenarii tipice de aplicare

Industria de tratare a apei: Clean water pumps, pompe de canalizare, aeration fans, sludge mixers

Building HVAC: Pompe de apă răcită, cooling water pumps, supply & exhaust fans for central air conditioning

Light Manufacturing: Transportoare cu bandă, packaging production lines, mixing & blending equipment, compresoare de aer

Metalurgie & Minerit: Dust extraction fans, material transport belts, pompe de drenaj miniere

Municipal Engineering: Water supply pumping stations, ventilation systems for wastewater treatment plants

Common Troubleshooting Matrix

Fenomen de eroare	Cauze fundamentale	Step-by-Step Remedial Actions
Overcurrent Trip (Cod de eroare 0001)	Short circuit in motor/cables, sudden load surge, overly short acceleration time	1. Cut power and test insulation & wiring of motor and power cables
		2. Appropriately extend acceleration time parameter
		3. Verify consistency between motor rated parameters and drive settings
DC Overvoltage Trip (Cod de eroare 0002)	Excessively high mains voltage, overly short deceleration time, faulty braking circuit	1. Measure input mains voltage to confirm it falls within allowable range
		2. Extend deceleration time or enable DC braking function
		3. Check wiring and resistance value of braking resistor for matching
Declanșare subtensiune (Cod de eroare 0003)	Single-phase power loss, blown input fuses, excessively low mains voltage	1. Inspect three-phase input power to eliminate phase loss issues
		2. Check status of input fuses / întreruptoare de circuit
		3. Confirm on-site mains voltage meets equipment requirements
Motor Overload Alarm (Cod de eroare 0005)	Jammed mechanical load, incorrect motor parameters, sustained overload operation	1. Cut power and rotate motor shaft manually to check mechanical smoothness
		2. Re-run motor identification auto-tune
		3. Evaluate actual load conditions and upsize drive model if necessary
Overheating Fault (Cod de eroare 0009)	Temperatura ambientală excesiv de ridicată, blocked cooling air ducts, faulty cooling fan	1. Clear dust buildup on drive air intake cooling grille
		2. Verify normal operation of cooling fan
		3. Improve cabinet ventilation and lower ambient temperature

Detailed List of Standard Accessories for ABB ACS580-01-087A-4 (Frame R5 / IP21 Version)

This model is a standard wall-mounted unit of ACS580 Frame R5. Factory supply contents are split into built-in onboard functions and physical accessories supplied in carton. Below is a detailed breakdown of the official standard supply scope:

Standard Built-in Onboard Functions (Integrat, No Extra Fitting Required)

All functions below are factory pre-configured and ready for direct use without purchasing extra options:

EMC Components: Built-in Class C2 EMC filter to meet industrial site electromagnetic compatibility requirements
Braking Circuit: Integrated braking chopper allowing direct connection of braking resistors for fast deceleration
Funcția de siguranță: Oprire sigură a cuplului (STO) compliant with PL e / SIL 3 nivelul de siguranta
Protecția mediului: Full triple-protection coating on control and power boards, resistant to humid, dusty and corrosive gas environments
Standard Control Interfaces: 6 intrări digitale, 2 iesiri digitale, 2 intrări analogice, 1 ieșire analogică
Basic Communications: Embedded RS-485 hardware port with native Modbus RTU protocol support
Proiectare structurală: Bottom cable entry compartment supporting standardized wiring and cable ingress protection
Physical Standard Carton Accessories (Separately Packed Inside Shipment Box)

Independent accessories available upon unpacking for installation and basic commissioning:

ACS-AP-S Assistant Control Panel (Chinese version): Equipped with LCD screen and full-function keys for parameter setup, status monitoring and fault diagnosis; pluggable onto drive front panel and supplied in separate packaging
Wall Mounting Template: 1:1 paper drilling positioning template for marking mounting hole positions on-site to reduce drilling errors
Cable Junction Box Assembly: Standard for Frame R5 IP21 units, including power cable grounding brackets, control cable shielding clamps and assembly fasteners
Mounting Fastener Kit: șuruburi M6, nuts and other metal hardware for wall mounting fixation
Ground Terminals & Cable Crimp Accessories: Dedicated main circuit grounding terminals and auxiliary crimp fittings for control terminals

III. Supplied Documentation & Identification Labels

Quick Installation and Startup Guide: Multilingual edition (inclusiv chineză) covering full procedures of wiring, power-up and basic commissioning
Safety Warning Stickers: Multilingual residual voltage warning labels to be affixed near equipment to alert maintenance personnel
Product Certificate of Conformity and Warranty Document

Nota: Full hardware manuals and firmware parameter manuals are not supplied as standard; downloadable via ABB official website or available as separate printed copies upon order.