Controler logic programabil Allen‑Bradley 2080-LC20-20QBB

Catalog Code Breakdown

Native I/O Allocation (20 Puncte)

Intrări: 12-point DC24V Digital Inputs

Terminals I-00~I-11, sinking/sourcing compatible (configurable)

Ieșiri: 8-point DC24V NPN Transistor Outputs

Terminals O-00~O-07, NPN transistor type. AC loads cannot be driven directly.

⚠️ Distinction:

2080-LC20-20QBB = NPN transistor output

2080-LC20-20QBBR = Relay output version

Specificații tehnice cheie

1. Alimentare electrică: 24 VDC (domeniul de operare:18~30 VDC)
2. Memoria programului: 10K instructions
3. Variable Memory: 10K bytes
4. Interfețe de comunicare

USB (programming port)

Embedded RS485 (Modbus RTU Master/Slave)

5. Capacitate de extindere

✅ Supports Micro800 plug-in modules (analog I/O, RTD/TC, high-speed counter, serial modules)

✅ Maximum 4 plug-in modules can be installed

6. Funcții de mare viteză

4-channel High-Speed Counter (HSC), max. 100kHz

4-channel Pulse Train Output (PTO), max. 100kHz for basic positioning control

7. Evaluări de mediu

Temperatura de functionare: 0 ~ 55 ℃

Temperatura de depozitare: -40 ~ 85 ℃

Clasa de protectie: IP20, cabinet mounting only

Cerință software

Software de programare: Connected Components Workbench (CCW)

Minimum supported version: CCW V8.0 and above

Aplicații tipice

Small conveying equipment, mașini de ambalare, ventilator & controlul pompei, custom automated tooling, control HVAC, basic stepper/servo positioning systems.

Ghid de selecție & Common Pitfalls

1. NPN sinking transistor output: Load negative wire connects to PLC output terminal; AC loads cannot be driven directly. Use DC24V solenoid valves preferentially.
2. Fără port Ethernet încorporat! Ethernet communication requires additional Ethernet plug-in module (de ex. 2080-EWEB).
3. Freewheeling diodes are recommended for inductive loads to avoid transistor breakdown caused by back EMF.
4. Micro820 does not support remote I/O, only local plug-in expansion available.

Înlocuiri directe & Comparație de serie

Same I/O count relay variant: 2080-LC20-20QBBR

Higher I/O capacity: Upgrade to Micro830 (2080-LC30 series)

Complete Reference for 2080-LC20-20QBB

(Terminal Wiring + Modbus RTU Configuration + PTO Program + Depanare + Cod HS)

1. Hardware Terminal Definition & Ghid de cablare

Model: Micro820 2080-LC20-20QBB

Alimentare electrică: DC24V; DIN:12-channel DC24V; DO:8-channel NPN Sinking Transistor Output

⚠️ Embedded serial port: Shared RS485/RS232 without galvanic isolation

1.1 Terminale de alimentare (PLC Main Power)

1.2 Terminale de intrare digitală (12 DIN: eu-00 ~ I-11)

Terminal comun: CM0

Sinking Wiring (Cele mai comune): CM0 connected to DC24V+; NPN sensor output to I-xx; sensor negative to 0V

Sourcing Wiring: CM0 connected to 0V; PNP sensor output to I-xx; sensor positive to DC24V

eu-00, eu-01, eu-02, eu-03: Dedicated high-speed counter channels

DI Terminal List:

eu-00, eu-01, eu-02, eu-03, eu-04, eu-05, eu-06, eu-07, eu-08, eu-09, I-10, I-11

1.3 Terminale de ieșire digitală (8 DO O-00 ~ O-07, NPN)

Terminal comun: -CM0

✅ NPN Sinking characteristic: Terminal O-xx approximates 0V when energized

Standard Wiring Scheme:

+DC24V → Load positive terminal; Load negative terminal → O-xx; All -CM0 terminals tied to DC24V 0V

O-00, O-01: PTO pulse output channels (de mare viteză)

Freewheeling diode must be reverse-paralleled for inductive loads (electrovalve)

DO Terminal List: O-00, O-01, O-02, O-03, O-04, O-05, O-06, O-07

1.4 Embedded RS485/RS232 Serial Terminal (6-pin terminal block)

RS485 Wiring: Pin7(B) ↔ Device B terminal; Pin8(O) ↔ Device A terminal; Pin6 shared ground

❗ No galvanic isolation on this port. Install isolated repeater for long-distance communication.

2. Step-by-step CCW Modbus RTU Configuration (Master/Slave Supported)

Software: Connected Components Workbench CCW V8.0 and above

Step1: Project Hardware Configuration

1. Create new project → Select controller 2080-LC20-20QBB
2. Double-click [Controlor] on left pane to open configuration page → Locate [Serial Port]
3. Driver selection: Modbus RTU

Step2: Communication Parameters (Recommended Defaults)

Step3: Register Mapping (Critical Section)

Modbus address mapping rule for Micro820

Coils (0x addresses): PLC BOOL variables

Discrete Inputs (1x addresses): Read-only BOOL status

Holding Registers (4x addresses): INT/DINT (Read & Write, cel mai utilizat)

Input Registers (3x addresses): Read-only INT values

Notă importantă: Micro800 series does not support automatic tag mapping for Modbus. Use function blocks for master read/write operations:

`MODBUS_READ` / `MODBUS_WRITE`

3. PTO Pulse Positioning Control (O0/O1 Pulse Output for Stepper/Servo)

Hardware Channel Assignment

PTO0: Pulse Output → O-00; Direction signal recommended on O-02

PTO1: Pulse Output → O-01; Direction signal recommended on O-03

Max output frequency: 100kHz

Output type is NPN sinking. Servo drive pulse input setting must be low-level active / sinking input

CCW Configuration Workflow

1. Controller Configuration → Enable [Ieșire impuls (PTO0)]
2. Set maximum frequency: 100000 Hz; Acceleration/Deceleration time: 500Domnișoară
3. Call motion function block `PTO_RUN` inside program

Structured Text Example: Relative Positioning

⚠️ Critical Limitation: Micro820 does not support electronic cam or multi-axis synchronization; only basic point-to-point positioning available.

4. High-Speed Counter (HSC) Configurare (I0~I3)

4 independent HSC channels, support single-phase input & quadrature encoder with 4x multiplication

Common operation modes:

Mode0: Single-phase up-counting

Mode4: Quadrature encoder, 4x frequency multiplication mode

5. Cablaj & Selection Hard Rules (Risk Avoidance)
6. 2080-LC20-20QBB = NPN sinking output. AC loads cannot be driven directly. Add intermediate relays for AC loads.
7. Do not overload transistor outputs continuously: 0.3A per point maximum (ambient temperature 55℃)
8. RS485 port non-isolated. Communication errors easily occur under multi-ground power supply systems; implement shared ground or galvanic isolation.
9. No native Ethernet port. Install plug-in module 2080-EWEB if Ethernet connection is required.
10. Maximum 4 plug-in modules supported. Remote I/O expansion is not available.
11. Use shielded cables for pulse wiring; route away from power cables of contactors and inverters to reduce interference.
12. HS Code Reference for Import & Export Customs Declaration

8537101100

Descriere: Controler logic programabil (PLC)

⚠️ Reference only. Confirm classification with local customs authority before formal customs clearance.

7. Matricea de depanare comună a erorilor

8. Official Manual Reference

Manual de utilizare: 2080-UM005E-EN-E (Micro820 Controller User Manual)

Allen‑Bradley 2080-LC20-20QBB (Micro820) Programmable Controller Overview

1. Poziționarea produsului

2080-LC20-20QBB is an Allen‑Bradley Micro820 compact integrated PLC manufactured by Rockwell Automation. Designed for standalone OEM machinery and small complete automation systems. It replaces conventional control circuits built with massive intermediate relays. Equipped with integrated digital & analog I/O and multiple communication ports, Montabil pe șină DIN. Target market: compact, low-cost standalone automation solutions.

Catalog Summary

2080: Micro800 series identifier

LC20: Micro820 controller platform

20: 20 native I/O points

Q: 24V DC sourcing (PNP) ieșire digitală

BB: Onboard 4 intrări analogice +1 ieșire analogică, PTO pulse output, embedded Ethernet

2. Native Hardware I/O Specifications
3. Intrări digitale:12-point DC24V (configurable sinking/sourcing)

Signal acquisition: Photoelectric sensors, comutatoare de proximitate, limit switches, start/stop pushbuttons, oprire de urgență, door interlock switches

2. Ieșiri digitale:7-point DC24V PNP sourcing output

Drive small solenoid valves, indicator lamps, relee intermediare (de ex. MY2N-GS), bobine de contactor

3. Integrated Analog Channels (Avantajul de bază)

4 intrări analogice: 0~10V, 0~20mA, thermistor temperature acquisition supported

1 ieșire analogică: 0~10V / 0~20mA, used for inverter speed regulation and modulating valve control

4. Motion Control Functions

Încorporat 1 channel PTO/PWM pulse output, capable of driving stepper motor controllers for basic point positioning

5. Capacitate de expansiune: 2 plug-in slots for high-speed counters, serial ports and additional I/O modules
6. Funcții de bază

3.1 Discrete Logic Control (Funcția de bază)

Based on signals from sensors and operation buttons, execute programmed sequence, interblocare, mutual lock and start-stop logic:

Sequential start/stop of conveyors, automatic cylinder cycling, automatic machine workflows, safety loop judgment and fault alarm output.

Can be paired with MY2N-GS intermediate relays to drive high-power loads indirectly.

3.2 Analog Process Control (Advantage of Onboard Analog Channels)

Collect temperature, presiune, liquid level and flow signals from transducers

Built-in PID function: Constant temperature control, alimentare cu apă la presiune constantă, air volume regulation; Analog output to adjust inverter speed and proportional valves.

3.3 High-speed Signal Processing

High-speed counters read encoder pulses (viteză & position measurement); PTO pulses implement basic stepper positioning.

3.4 Communication Networking

1. EtherNet/IP Ethernet Port

Connect HMI touchscreens, SCADA host computers and other Rockwell PLCs for remote monitoring, parameter access and program upload/download.

2. RS232/RS485 (Non-isolated Serial Port)

Modbus RTU Master/Slave interface to connect inverters, instruments and third-party sensors.

3. USB Programming Port: Direct connection to PC for program download and online debugging.

3.5 Stocarea datelor, Recipe & Log Management

Embedded RTC real-time clock: Timed tasks, timestamp for fault logging

MicroSD card slot: Store production recipes, runtime logs, înregistrări de erori; support program backup & one-click restore.

3.6 HMI Expansion

Supports external remote text display 2080‑REMLCD, enabling parameter modification and alarm display without additional touchscreen panels.

4. Typical Industries & Echipamente
5. Mașini de ambalare: Small sealers, etichetatoare, mașini de umplere, miniature sorting conveyor systems
6. HVAC & Tratarea apei: Small pump stations, air handling units, constant temperature water tanks, chemical dosing systems
7. Utilaje alimentare & Central Kitchen Equipment: Washing lines, material conveyors, temperature-controlled ovens, smoke exhaust control systems
8. Custom Automation: Assembly tooling, test benches, small transfer equipment
9. Auxiliary control for machine tools, material conveying lines
10. Laboratory equipment, small constant-temperature aging equipment
11. Software de programare

Software de programare: Connected Components Workbench (CCW)

Supported languages: Diagrama de scară (LD), Diagrama blocului funcțional (FBD), Text structurat (SF), compliant with IEC61131‑3

6. Application Boundaries

✅ Suitable for: Standalone machines with limited I/O, analog acquisition/PID demand, Ethernet networking requirement, cost-sensitive OEM equipment

❌ Not suitable for: Multi-axis servo synchronization, large-scale distributed production lines, massive remote I/O, high safety-level safety circuits (install dedicated safety relays such as G9SX for safety functions)

Supplement Remarks

1. Terminology strictly follows Rockwell Automation official datasheet standards, suitable for export tender documents, equipment manuals and overseas product catalogs;
2. Consistent industrial automation vocabulary matching international engineering conventions;
3. If you need Russian translation or condensed datasheet version, I can process further.