Mitsubishi S-T35 AC Magnetic Contactor

The S-T35 belongs to Mitsubishi MS-T Series, the upgraded successor model of S-N35, which is fully interchangeable with S-N35. It is an AC coil driven contactor widely used for three-phase motor start-stop and power circuit control in control cabinets.

✅ Core Specifications

Dimensiunea cadrului: 35 cadru, 3-contactele principale ale polului

AC-3 rating at 380/400V: 18.5kW, rated operating current 35A

Tensiunea maximă a circuitului principal: AC690V

Standard built-in auxiliary contacts: 2NU + 2NC (2a2b)

Dimensiuni de gabarit: 75(W) × 89(H) × 91(D) mm, weight 0.55kg

Montare: DIN rail mounting or screw fixing; mounting hole positions fully compatible with S-N35

Clasa de protectie: IP20

Rezistenta mecanica: 10 milioane de operațiuni; Rezistenta electrica (AC-3): aproximativ. 1 milioane de operațiuni

Coil voltage options (AC standard): AC24V, AC110V, AC220V, AC380V, AC400V, AC500V, 50/60Hz universal

✅ Model Naming Rule

`S-T35 + Coil Voltage`

Exemplu: S-T35 AC220V, S-T35 AC380V

Nota: S-T series is AC coil by default. DC coil version is SD-T series; do not mix them up.

✅ Comparison with S-N35

Curentul nominal al contactului principal, power rating and auxiliary contact configuration are identical

Mounting dimensions and drilling holes are interchangeable for direct replacement

Optimized coil pull-in performance, wider voltage tolerance range and lower power consumption; officially recommended replacement for S-N35

✅ Matching Accessories

Module de contact auxiliare: UA, UN series (for contact expansion)

Surge suppressor: SZ series (varistor / RC absorber to suppress coil back EMF)

Releu termic de suprasarcina: TH-T35 (protectie la suprasarcina motorului, potrivit pentru 35 cadru)

Mechanical interlock unit: used for forward/reverse (inversarea) circuit

✅ Typical Application Scenarios

Mașini de turnat prin injecție, fani & pompe de apa, linii de producție, compresoare de aer, HVAC control cabinets, machine tool power circuits, direct start-stop control of three-phase asynchronous motors.

✅ Troubleshooting Guide

1. Coil energized but no pull-in: Verificați tensiunea bobinei, check loose wiring, test burnt coil
2. Humming noise after pull-in: Undervoltage supply, dust/rust on iron core mating surfaces
3. Severe main contact arcing & ardere: Overload beyond AC-3 rating, pierdere de fază, frequent switching, damaged arc shield
4. Unstable auxiliary contact signals: Oxidized contact surface, insufficient terminal tightening torque

✅ Cross-Brand Equivalent Models

Schneider LC1D38, Siemens 3RT2035, OMRON CJX2-32

1. Terminal Definition of S-T35 (Standard 2a2b)

Circuitul principal (Incoming top, outgoing bottom)

L1, L2, L3 (Partea de alimentare); T1, T2, T3 (Partea de încărcare, connected to TH-T35 thermal relay input terminals)

Terminale bobine

A1, A2: bobina AC. Two A2 terminals are internally shorted for easy jumper wiring.

Built-in Auxiliary Contacts (2NU+2NC)

✅ Normally Open (NU): 13-14, 43-44

✅ Normally Closed (NC): 21-22, 31-32

Screw size: Main circuit M4; Bobina & auxiliary contacts M3.5

2. Basic Self-Locking Wiring Diagram (S-T35 + TH-T35 Thermal Relay, Motor Start-Stop)

Circuitul principal

3-phase power → Circuit breaker → S-T35 L1/L2/L3 → S-T35 T1/T2/T3 → TH-T35 thermal relay input → Thermal relay output → Motor M

Circuit de control (AC220V example)

1. L → Stop button (NC) → Butonul Start (NU) → S-T35 A1
2. N → S-T35 A2
3. Self-locking: Paralel 13-14 (NU) across the start button
4. Protectie la suprasarcina: Wire TH-T35 95-96 (NC) in series into the control circuit; the coil will cut off when overload trips

Full Model List of MS-T Series

1) Non-Reversing Standard Models (S-T, your S-T35 is included)

Coil suffix options: AC24V / AC110V / AC220V / AC380V; de ex. S-T35 AC220V

2) Mers înapoi (Înainte/înapoi) Integrated Models (S-2×T with built-in interlock)

S-2×T10, S-2×T12, S-2×T20, S-2×T21, S-2×T25, S-2×T32, S-2×T35, S-2×T50, S-2×T65, S-2×T80, S-2×T100

3) Special Derivative Models (Same frame, structură diferită)

1. DC Coil Version (SD-T, not interchangeable with S-T)

SD-T10, SD-T12, SD-T20, SD-T21, SD-T25, SD-T32, SD-T35, SD-T50, SD-T65, SD-T80, SD-T100

2. Mechanical Latching Type (SL-T): Pull-in on energization, keep closed after power cut; only released when control circuit is disconnected

SL-T21, SL-T35, SL-T50, SL-T65, SL-T80, SL-T100

3. Off-Delay Release Type (S-T□DL)

S-T12DL, S-T21DL, S-T35DL

1. Matching Thermal Overload Relays (TH-T Series, frame-matched one-to-one)

TH-T18 (for T10/T12/T20)

TH-T25 (for T21/T25/T32)

TH-T35 (for S-T35)

TH-T50 (for T50)

TH-T65 (for T65/T80)

TH-T100 (for T100)

III. Magnetic Starters (Integrated contactor + releu termic)

Nerevers: MSO-T10, MSO-T12, MSO-T20, MSO-T21, MSO-T25, MSO-T32, MSO-T35, MSO-T50, MSO-T65, MSO-T80, MSO-T100

Mers înapoi: MSO-2×T10 …… MSO-2×T100

1. Regula de denumire a modelului (S-T□)

S = Contactor

T = MS-T Series (replaces old S-N series)

Numeral = Frame current rating (10/12/20/21/25/32/35/50/65/80/100)

Sufix: Tensiunea bobinei (AC220V/AC380V); DL = Off-delay release; SL = Mechanical latch; SD = DC coil

1. Cross-Replacement Table with Old S-N Series (Înlocuire directă)

S-T10 ↔ S-N10

S-T12 ↔ S-N12

S-T20 ↔ S-N20

S-T21 ↔ S-N21

S-T25 ↔ S-N25

S-T32 ↔ S-N32

S-T35 ↔ S-N35 (modelul dvs)

S-T50 ↔ S-N50

S-T65 ↔ S-N65

S-T80 ↔ S-N80

S-T100 ↔ S-N100