The V8 series ЧМИ is discontinued. It is widely used on legacy equipment (например, Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen.
Определение кода модели
В810: V8 series, 10.4-inch model
я: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port)
С: Standard VGA (640×480) эконом-версия
Н: Analog resistive touch panel
080: DC24V power supply variant (suffix D also stands for DC24V; AC models have no such suffix)
Основные характеристики оборудования
Отображать: 10.4″ Цветной TFT ЖК-дисплей, 640×480 ВГА, 65,536 цвета
Touch type: Аналоговый резистивный сенсорный
Подсветка: ВЕЛ, rated service life approx. 70,000 часы
Память: 4.5MB FROM for screen storage; 128КБ СРАМ (for recipes & alarm logs)
Защита передней панели: IP65 (with original waterproof gasket), rear side IP20
Габаритные размеры: 303.8 × 231.0 × 69.0 мм
Panel cutout size: 289.0 × 216.2 мм (+0.5/-0 терпимость)
Rear Interface List
- LAN RJ45: 10/100Мбит/с Ethernet
- MJ1, MJ2 (8-pin modular): RS232/485
- D-Sub9 (CN1): RS232C / RS422/485
- USB-А (Хозяин), USB-B (Programming slave port)
- CF card slot (legacy CF card, not SD card)
- 24VDC power terminal block
Примечание: V810iCN does NOT support GU video/RGB optional modules
Программное обеспечение & Коммуникация
Программное обеспечение для программирования: В-СФТ-5 / В-СФТ-6 (V-SFT6 supports V8, V9 and V10 series simultaneously)
8-way multi-protocol communication: Подключитесь к 8 PLCs of different brands simultaneously (Мицубиси, Сименс, Омрон, Дельта, регуляторы температуры, инверторы, и т. д.)
Поддерживаемые функции: Сигнализация, графики трендов, recipe management, macro scripts, PLC ladder transfer, USB printing, CF card backup for screens & logs
Варианты замены (Discontinued Model Upgrade)
- Official Series Upgrade: V1010iC (10.4-дюйм, identical cutout; project conversion via V-SFT automatic tool) – Top priority for direct replacement
- Domestic HMI Replacement: 10.4-inch local HMIs. Requires redeveloping project screens and reconfiguring communication protocols.
Важное напоминание: V8→V10 project conversion is irreversible. Always back up the original project before conversion.
Распространенные неисправности & Советы по обслуживанию
Typical failures: Unresponsive touch, touch offset, black screen, backlight failure, communication loss, unreadable CF card
Запчасти: Touch panel, светодиодная подсветка, плата питания, CF-карта, backup battery for SRAM
Maintenance note: Legacy CF cards are difficult to source. Use USB for program upload/download whenever possible.
Hakko MONITOUCH V8 Series (Hakko Electronics / Фуджи Электрик) Полный список моделей
The entire V8 series is end-of-life (окончание срока действия).
Suffix Explanation
я: Built-in LAN Ethernet port; no i = no Ethernet port
С: High-performance model, supports GU RGB video optional modules
Т: Mid-range model
С: Standard economy model (V810iCN belongs to this branch)
М: Simplified model exclusive to V806
СН: 7.5-inch handheld type
Х: 15-inch XGA high-end model
Н: Аналоговый резистивный сенсорный; Д / 080: Источник питания постоянного тока 24 В
5.7-дюйм | V806 Series (320×240QVGA)
V806M / V806iM
V806C / V806iC
V806T / V806iT
Power variants: V806iCD, V806iTD, В806иМД (24 В постоянного тока)
7.5-дюйм | Handheld Model V808CH
В808Ч / V808i
8.4-дюйм | V808 Series (640×480 ВГА)
V808C / V808iC
V808S / V808iS
Power variants: V808iCD, V808iSD (24 В постоянного тока)
10.4-дюйм | V810 Series (640×480 ВГА, your target model here)
В810С / V810iC (Эконом-версия; V810iCN-080 falls here; iC version cannot install GU video modules)
В810Т / V810iT (Средний уровень, supports GU optional units)
В810С / В810iS (Высокая производительность, supports GU video/RGB modules)
Suffix variants: Н (резистивный сенсорный), D/080 (24 В постоянного тока), например, V810iCN, V810iTN, В810иСН
12.1-дюйм | V812 Series (800×600 SVGA)
В812С / В812iS (Высокая производительность, supports GU video modules)
15-дюйм | V815 Series (1024×768 XGA)
V815iX (V8 series flagship; Ethernet + видеовход)
Function Comparison Table
| Model Branch | Built-in LAN (я) | GU Video Module Support | Позиционирование |
| V8xxC (V810iC/V808iC) | Optional i | ❌ | Экономика (standard for injection molding machines) |
| V8xxT (V810iT) | Optional i | ✅ | Mid-range general purpose |
| V8xxS (V810iS/V812iS/V808iS) | Optional i | ✅ | Высокая производительность |
| V815iX | ✅ | ✅ | 15″ XGA top model |
| V806M | Optional i | ❌ | 5.7-inch entry-level |
| В808Ч | Optional i | ❌ | 7.5-inch handheld |
Optional Units (For V8i models with expansion port, excluding V810iC)
GU-00/01/02/03/10/11: RGB video input units; DUN-10: V806 dedicated expansion unit
Программное обеспечение & Замена
Программное обеспечение для программирования: V-SFT5 / V-SFT6
Official upgrade series: V10 series (V1010iC is the preferred drop-in replacement for V810iCN, same cutout size; one-click project conversion in V-SFT6)
Replacement Model List for V810iCN-080 (Hakko MONITOUCH)
Key specs of original unit: 10.4-дюйм, 24 В постоянного тока, встроенный Ethernet, economy grade, no video expansion port, cutout size: 289.0 × 216.2 мм
- Original Brand Upgrade (Первый выбор: Project Migration, No Cutout Modification)
(1) Серия V10 (Current Fuji/Hakko Mainstream, Official Recommended Replacement)
V1010iC-D (Лучший выбор)
✅ Identical panel cutout; не требуется модификация шкафа. V-SFT6 automatically converts V8 project files.
✅ Equipped with LAN, serial ports and USB; SD card replaces legacy CF card.
⚠️ Resolution upgraded from 640×480 to 800×600; screens auto-scale with minor control adjustments needed. Converted projects cannot be opened again on V8 software.
V1010iS-D (High-end Alternative)
Supports video input with higher performance, same cutout dimensions for future video expansion needs.
(2) Серия V9 (Transitional Discontinued Model, Only Stock Available)
V9100iC (Official designated replacement for V810iC series)
Project migration via V-SFT6. Stock availability is limited; not the first choice.
(3) V8 Series Spare Replacement (Only for Used Secondhand Parts, Not for New Purchases)
V810iTN-080 / В810иСН-080
Тот же контур & cutout size; extra video expansion port. The original V810iCN cannot fit GU modules, while iTN/iSN support video add-ons. Project files can be downloaded directly without modification.
- Domestic HMI Replacement (Project Reconfiguration Required)
Selection criteria: 289×216mm cutout, 10.4-дюйм, 24 В постоянного тока, Ethernet + RS485/232 ports
Вайнтек: MT8106iP / MT8106iE (Check cutout carefully; adapter plate may be needed)
Куньлунь Тонгтай: TPC1061Ti (Verify cutout dimensions)
Kinco / Синдже: Most 10.4-inch high-end models require custom adapter panels or cabinet re-cutting.
Недостаток: V-SFT project files cannot be imported directly; full re-configuration and communication debugging required.
Сравнительная таблица выбора
| Запасная модель | No Cutout Modification | Direct Project Migration | Video Module Support | Статус поставки |
| V1010iC-D | ✅ | ✅ (V-SFT6 conversion) | ❌ | Commercially available |
| V1010iS-D | ✅ | ✅ | ✅ | Commercially available |
| V9100iC | ✅ | ✅ | ❌ | Снято с производства, only stock/used |
| V810iTN/080 | ✅ | ✅ | ✅ | Снято с производства, secondhand only |
| Domestic 10.4″ ЧМИ | Adapter plate may be needed | ❌, full re-programming | Depends on model | Abundant stock |
Critical Migration Notes
- Back up the original V8 project file before conversion; V8→V10 conversion is irreversible.
- Recipes and alarm logs stored on the original CF card must be exported and imported separately after migration.
- Протоколы связи (Mitsubishi MC, Сименс С7, Omron Hostlink, и т. д.) are fully compatible with V10; protocol parameters remain almost unchanged.
- Terminal pin assignments, 24V power and serial pinouts differ. Always cross-check the V10 manual before wiring.
Контактор,автоматический выключатель,датчик,Кодер,ПЛК,Конвертер






















NH42-63-318x560.png)



