Ordering No.: 1SFA898216R7000
PSTX: เอบีบี PSTX advanced ซอฟต์สตาร์ทเตอร์ ชุด, three-phase thyristor control with built-in bypass contactor
470: จัดอันดับการดำเนินงานในปัจจุบัน (การเชื่อมต่อแบบอินไลน์): 470 ก
690: แรงดันไฟฟ้าวงจรหลัก: 208~690 VAC
70: ควบคุมอุปทาน: 100–250 V AC, 50/60 เฮิรตซ์
- Key Technical Ratings
| รายการ | ข้อมูลจำเพาะ |
| In-line rated current | 470 ก |
| Inside-delta equivalent current | 814 ก |
| แรงดันไฟฟ้าวงจรหลัก | 208~690 VAC, 50/60 เฮิรตซ์ |
| ควบคุมอุปทาน | 100–250 โวลท์ |
| พลัง (อินไลน์, 400วี) | 250 กิโลวัตต์ |
| พลัง (อินไลน์, 690วี) | 450 กิโลวัตต์ |
| พลัง (Inside-delta, 690วี) | 800 กิโลวัตต์ |
| Starting capacity | 4×Ie for 10 secondseero |
| การเริ่มต้นสูงสุดต่อชั่วโมง | 6 timeseero |
| ระบายความร้อน | Thermostat-controlled fan cooling, built-in bypass contactoreero |
| ระดับการป้องกัน (วงจรหลัก) | IP20; detachable keypad IP66eero |
| การสื่อสาร | Built-in Modbus RTUeero |
| เอาท์พุทแบบอะนาล็อก | ปัจจุบัน / แรงดันไฟฟ้า / Power factor selectable |
| Overload class | Class 10eero |
| อุณหภูมิแวดล้อม | -25~+60 ℃; Max altitude 4000 ม (จำเป็นต้องมีการลดอัตรา)eero |
- ฟังก์ชั่นในตัว
เริ่มต้นอย่างนุ่มนวล & หยุดนุ่มนวล: ทางลาดแรงดันไฟฟ้า, torque control ramp, ขีดจำกัดปัจจุบันเริ่มต้น, dual current limit mode
Pump cleaning & anti-surge functions (ideal for pump applications)
Jog / slow speed, pre-start, kick start
Dynamic braking & standstill braking
Limp mode: Two-phase reduced-capacity operation if one thyristor fails
Fire emergency mode: Bypass all protections to force run
Real-time clock, บันทึกเหตุการณ์, การวัดพลังงาน, thyristor running hour counter
Auto phase sequence detection & auto restart
การป้องกันเต็มรูปแบบ: Electronic overload, โรเตอร์ที่ถูกล็อค, การสูญเสียเฟส, ความไม่สมดุลในปัจจุบัน, บรรทุกน้อยเกินไป, ความผิดของโลก, แรงดันไฟฟ้าสูง/ต่ำ, PTC/PT100 motor temperature monitoring, bypass fault, ข้อผิดพลาดในการสื่อสาร
เอชเอ็มไอ: Color graphical display, 17 ภาษา, detachable with password lock
- การใช้งานทั่วไป
ปั๊มน้ำ, แฟน ๆ, คอมเพรสเซอร์, สายพานลำเลียง, crushers and other heavy-duty equipment. The built-in bypass cuts off thyristor current after full speed, eliminating continuous heat loss and saving energy.
- Cross-Series & หมายเหตุทดแทน
- PSTX470-600-70 (หมายเลขคำสั่งซื้อ. 1SFA898116R7000): Max voltage 600V, cannot directly replace the 690V version
- PSTB470: Basic model without torque control, limp mode and pump cleaning; not an equivalent replacement
- ทางเลือกภายในประเทศ: Renle, Xichi, Heping 470A/690V built-in bypass soft starters; communication and protection logic differ, PLC programs need modification
- การติดตั้ง & เคล็ดลับการบำรุงรักษา
- Two wiring options: อินไลน์ (ที่พบบ่อยที่สุด) / Inside-delta (boost motor power rating; soft starter only carries branch winding current)
- Sufficient cabinet ventilation; derate power for +60℃ ambient or high altitude
- Regularly inspect built-in bypass contacts; thyristors and cooling fans are wearing parts
- Set Modbus RTU address and baud rate via the keypad; refer to PSTX official communication manual for register mapping
Working Principle of Thyristor Soft Starters (ABB PSTX Type)
A soft starter is essentially a thyristor (เอสซีอาร์) AC voltage regulator wired in series with the three-phase motor main circuit. It adjusts the thyristor firing angle to gradually raise motor terminal voltage for smooth ramp-up start, and gradually lower voltage for smooth ramp-down stop — no sudden full voltage jump as in direct-on-line or star-delta starting.
- ส่วนประกอบหลัก: Anti-parallel Thyristors per Phase
Each phase has a pair of reverse-connected thyristors:
Small firing angle → short conduction time → low output voltage
Gradually increasing firing angle → voltage rises smoothly
Full firing angle → output voltage nearly equals grid rated voltage
Thyristors only trigger at voltage zero-crossing in each AC half-cycle, enabling precise voltage regulation.
- Start-Stop Sequence (Built-in Bypass Model like PSTX)
- สแตนด์บาย: Bypass contactor open; all current flows through thyristor modules
- Soft Ramp-up: Controller increases thyristor conduction angle step by step; motor voltage climbs slowly, limiting inrush current (no 5~7× rated current surge of DOL start). Two main modes: voltage ramp or torque-controlled ramp (PSTX exclusive)
- Bypass Closure: When motor reaches full speed, the built-in bypass contactor closes. Current transfers to mechanical contacts; thyristors exit the main circuit with no continuous heat generation
- การทำงานปกติ: Motor runs directly on mains; soft starter only monitors protection
- ซอฟท์สต็อป: Bypass opens again, switching back to thyristor voltage control; voltage ramps down slowly to stop the motor gently, eliminating water hammer in piping and mechanical shock on transmission parts
- Difference vs Star-Delta / Autotransformer Starters
Star-delta: Step voltage switching, still creates secondary current surges; only fixed voltage reduction ratio
Autotransformer: Step-down voltage only, bulky size, no continuous adjustable curve
Thyristor soft starter: stepless continuous voltage regulation, programmable start curves, plus braking, pump cleaning, full motor protection and fieldbus communication
- Two Common Starting Modes
ขีดจำกัดปัจจุบันเริ่มต้น: Lock maximum starting current first; voltage adjusts automatically to match load — preferred for heavy loads
Torque-controlled start (PSTX only): Regulates motor torque directly instead of pure voltage, delivering smoother acceleration with less mechanical impact
- ข้อจำกัดที่สำคัญ
Thyristor voltage regulation only changes voltage amplitude, NOT frequency.
👉 Soft starter ≠ Variable Frequency Drive (วีเอฟดี): Soft starters only control starting & หยุด; they cannot run the motor continuously at variable speed. VFD adjusts both voltage and frequency for continuous speed regulation.
Common Faults for PSTX Built-in Bypass Soft Starters
- Heatsink / Thyristor Overheating (Fault F04xx)
อาการ: Trips after several starts; housing hot; cooling fan fails to run
สาเหตุที่แท้จริง:
Fan damaged or air duct blocked with dust
Cabinet sealed tightly; high ambient temperature or high altitude without derating
บายพาสคอนแทคเตอร์ไม่สามารถปิดได้; thyristors stay energized and overheat
Excessively long ramp time or frequent starts exceeding the 6 starts/hour limit
โซลูชั่น: ทำความสะอาดฝุ่น, replace fan, verify start frequency, troubleshoot bypass circuit
- การสูญเสียเฟส / 3-Phase Current Imbalance (F03xx)
อาการ: Trips immediately on power-up; motor hums with heavy vibration
สาเหตุที่แท้จริง:
Blown fuses, open circuit breakers, loose terminal lugs or oxidized copper busbars
One-phase thyristor open-circuit or trigger failure
Broken motor winding or poor cable connection
ความแตกต่าง: Input phase loss = supply side; Output phase loss = wiring between soft starter and motor or damaged SCR
- กระแสเกิน / ไฟฟ้าลัดวงจร
อาการ: Instant trip on start; current far exceeds the set current limit
สาเหตุที่แท้จริง:
โรเตอร์ล็อคมอเตอร์ (blocked impeller, แบริ่งที่ยึด)
Cable or motor insulation breakdown (phase-phase or phase-earth short)
Starting voltage set too high or current limit value set too large
Thyristor short-circuited (do not retry starting repeatedly)
- Start Timeout (Failed to Reach Full Speed)
อาการ: Ramp finishes but motor never reaches rated speed; start timeout fault triggers
สาเหตุที่แท้จริง:
Current limit set too low or initial voltage too low (แรงบิดไม่เพียงพอ)
ความเฉื่อยโหลดมากเกินไป, closed valve or heavy mechanical resistance
Wrong motor rated current parameter or undersized motor
Severe grid voltage drop during start
- Bypass-Related Faults (Most Frequent on PSTX: F0613, bypass failure, รายชื่อติดขัด)
- Bypass fails to pull in: Thyristors remain energized and overheat rapidly
สาเหตุ: Damaged coil, insufficient control voltage, bypass function disabled in parameters, internal detection circuit failure
- Bypass contactor welded shut: Input and output permanently shorted; soft stop function fails completely; อันตรายจากความปลอดภัย
สาเหตุ: Frequent heavy-current cycling, arc erosion on contacts, repeated short-circuit surges
- Motor Overload Trip
อาการ: Trips after long running time, not during startup
สาเหตุที่แท้จริง:
Continuous overloaded operation, pump clogging, worn bearings
Incorrect motor rated current or Class 10 overload setting
Long low-speed operation leading to poor motor cooling; PTC/PT100 overtemperature alarm
- Underload Protection Trip
อาการ: Motor runs but current drops below threshold (dry-run protection for pumps/fans)
สาเหตุที่แท้จริง: Pump running dry, fully open valve with no load, broken belt or disconnected coupling
บันทึก: Disable underload protection temporarily during no-load commissioning; re-enable after field commissioning.
- Thyristor SCR Damage (สั้น / วงจรเปิด)
อาการ: No clear fault code, but 3-phase current unbalanced, loss of voltage control, residual voltage on output after shutdown
สาเหตุที่แท้จริง: Grid surge / สายฟ้าฟาด, repeated heavy starts, การระบายความร้อนไม่ดี, output short-circuit impact
การทดสอบ: Disconnect power and measure resistance across each thyristor; shorted SCR shows near-zero resistance between input and output. Damaged power modules cannot be repaired and must be replaced.
- ควบคุมอุปทาน & ข้อผิดพลาดในการสื่อสาร
No power on HMI: หน้าจอสีดำ, random faults → low 100–250V control supply or blown internal fuse
Modbus RTU communication loss: PLC cannot read data → mismatched address/baud rate, poor shielding or ground interference
- Phase Sequence Fault
อาการ: Phase reversal alarm on power-up; start inhibited
สาเหตุที่แท้จริง: Incoming three-phase wiring reversed. You can disable phase sequence check temporarily (not recommended for permanent operation).
- Failed Soft Stop (Water Hammer)
อาการ: Motor stops abruptly, causing severe pipeline water hammer
สาเหตุที่แท้จริง: Soft stop ramp time set too short; welded bypass contactor prevents switching back to thyristor control, resulting in direct hard stop.
Fast On-Site Troubleshooting Sequence (PSTX Recommended)
- Check fault code and event log on the graphical display (PSTX stores full historical records)
- Cut off power and inspect all main terminals & busbars for overheating and loose connections
- Disconnect the motor and run no-load test to isolate faults: soft starter failure vs motor/mechanical load failure
- Verify bypass contactor operation and cooling fan rotation
- Double-check that all motor nameplate parameters match the soft starter settings
Full PSTX Series Model List (บายพาสในตัว)
PSTX xxx-600-70 (208~600V เอซี)
| แบบอย่าง | หมายเลขคำสั่งซื้อ. | จัดอันดับปัจจุบัน | 400วี พาวเวอร์ |
| PSTX30-600-70 | 1SFA898103R7000 | 30 ก | 15 กิโลวัตต์ |
| PSTX37-600-70 | 1SFA898104R7000 | 37 ก | 18.5 กิโลวัตต์ |
| PSTX45-600-70 | 1SFA898105R7000 | 45 ก | 22 กิโลวัตต์ |
| PSTX60-600-70 | 1SFA898106R7000 | 60 ก | 30 กิโลวัตต์ |
| PSTX72-600-70 | 1SFA898107R7000 | 72 ก | 37 กิโลวัตต์ |
| PSTX85-600-70 | 1SFA898108R7000 | 85 ก | 45 กิโลวัตต์ |
| PSTX105-600-70 | 1SFA898109R7000 | 105 ก | 55 กิโลวัตต์ |
| PSTX142-600-70 | 1SFA898110R7000 | 142 ก | 75 กิโลวัตต์ |
| PSTX170-600-70 | 1SFA898111R7000 | 170 ก | 90 กิโลวัตต์ |
| PSTX210-600-70 | 1SFA898112R7000 | 210 ก | 110 กิโลวัตต์ |
| PSTX250-600-70 | 1SFA898113R7000 | 250 ก | 132 กิโลวัตต์ |
| PSTX300-600-70 | 1SFA898114R7000 | 300 ก | 160 กิโลวัตต์ |
| PSTX370-600-70 | 1SFA898115R7000 | 370 ก | 200 กิโลวัตต์ |
| PSTX470-600-70 | 1SFA898116R7000 | 470 ก | 250 กิโลวัตต์ |
| PSTX570-600-70 | 1SFA898117R7000 | 570 ก | 315 กิโลวัตต์ |
| PSTX720-600-70 | 1SFA898118R7000 | 720 ก | 400 กิโลวัตต์ |
| PSTX840-600-70 | 1SFA898119R7000 | 840 ก | 450 กิโลวัตต์ |
| PSTX1050-600-70 | 1SFA898120R7000 | 1050 ก | 560 กิโลวัตต์ |
| PSTX1250-600-70 | 1SFA898121R7000 | 1250 ก | 710 กิโลวัตต์ |
PSTX xxx-690-70 (208~690V เอซี, including PSTX470-690-70)
| แบบอย่าง | หมายเลขคำสั่งซื้อ. | ปัจจุบัน | 400V kW | 690V kW |
| PSTX30-690-70 | 1SFA898203R7000 | 30 ก | 15 | 25 |
| PSTX37-690-70 | 1SFA898204R7000 | 37 ก | 18.5 | 30 |
| PSTX45-690-70 | 1SFA898205R7000 | 45 ก | 22 | 37 |
| PSTX60-690-70 | 1SFA898206R7000 | 60 ก | 30 | 45 |
| PSTX72-690-70 | 1SFA898207R7000 | 72 ก | 37 | 55 |
| PSTX85-690-70 | 1SFA898208R7000 | 85 ก | 45 | 59 |
| PSTX105-690-70 | 1SFA898209R7000 | 105 ก | 55 | 75 |
| PSTX142-690-70 | 1SFA898210R7000 | 142 ก | 75 | 90 |
| PSTX170-690-70 | 1SFA898211R7000 | 170 ก | 90 | 132 |
| PSTX210-690-70 | 1SFA898212R7000 | 210 ก | 110 | 160 |
| PSTX250-690-70 | 1SFA898213R7000 | 250 ก | 132 | 184 |
| PSTX300-690-70 | 1SFA898214R7000 | 300 ก | 160 | 220 |
| PSTX370-690-70 | 1SFA898215R7000 | 370 ก | 200 | 257 |
| PSTX470-690-70 | 1SFA898216R7000 | 470 ก | 250 | 355 |
| PSTX570-690-70 | 1SFA898217R7000 | 570 ก | 315 | 450 |
| PSTX720-690-70 | 1SFA898218R7000 | 720 ก | 400 | 560 |
| PSTX840-690-70 | 1SFA898219R7000 | 840 ก | 450 | 710 |
| PSTX1050-690-70 | 1SFA898220R7000 | 1050 ก | 560 | 800 |
| PSTX1250-690-70 | 1SFA898221R7000 | 1250 ก | 710 | 1000 |
PSTB Basic Series (Reduced Functions, บายพาสในตัว)
| แบบอย่าง | หมายเลขคำสั่งซื้อ. | ปัจจุบัน | 400วี พาวเวอร์ |
| PSTB370-600-70 | 1SFA894015R7000 | 370 ก | 200 กิโลวัตต์ |
| PSTB470-600-70 | 1SFA894016R7000 | 470 ก | 250 กิโลวัตต์ |
| PSTB570-600-70 | 1SFA894017R7000 | 570 ก | 315 กิโลวัตต์ |
| PSTB720-600-70 | 1SFA894018R7000 | 720 ก | 400 กิโลวัตต์ |
| PSTB840-600-70 | 1SFA894019R7000 | 840 ก | 450 กิโลวัตต์ |
| PSTB1050-600-70 | 1SFA894020R7000 | 1050 ก | 560 กิโลวัตต์ |
PSTB does not support torque control, limp mode or pump cleaning. Only for simple fan & pump start-stop; not a direct replacement for PSTX.
PSR Compact Soft Starters (ประหยัด, NO Built-in Bypass)
| แบบอย่าง | หมายเลขคำสั่งซื้อ. | ปัจจุบัน | 400วี พาวเวอร์ |
| PSR3-600-70 | 1SFA896103R7000 | 3 ก | 0.75 กิโลวัตต์ |
| PSR6-600-70 | 1SFA896104R7000 | 6 ก | 1.5 กิโลวัตต์ |
| PSR9-600-70 | 1SFA896105R7000 | 9 ก | 2.2 กิโลวัตต์ |
| PSR12-600-70 | 1SFA896106R7000 | 12 ก | 3 กิโลวัตต์ |
| PSR16-600-70 | 1SFA896107R7000 | 16 ก | 4 กิโลวัตต์ |
| PSR25-600-70 | 1SFA896108R7000 | 25 ก | 5.5 กิโลวัตต์ |
| PSR30-600-70 | 1SFA896109R7000 | 30 ก | 7.5 กิโลวัตต์ |
| PSR37-600-70 | 1SFA896110R7000 | 37 ก | 11 กิโลวัตต์ |
| PSR45-600-70 | 1SFA896111R7000 | 45 ก | 15 กิโลวัตต์ |
| PSR60-600-70 | 1SFA896112R7000 | 60 ก | 18.5 กิโลวัตต์ |
| PSR72-600-70 | 1SFA896113R7000 | 72 ก | 22 กิโลวัตต์ |
| PSR85-600-70 | 1SFA896114R7000 | 85 ก | 30 กิโลวัตต์ |
| PSR105-600-70 | 1SFA896115R7000 | 105 ก | 37 กิโลวัตต์ |
Series Quick Comparison
- PSTX: High-end flagship, color HMI, การควบคุมแรงบิด, การเบรก, pump cleaning, โมดบัส, การป้องกันเต็มรูปแบบ, บายพาสในตัว; preferred for export industrial projects
- PSTB: Mid-range basic model, monochrome screen, limited functions, บายพาสในตัว
- สสส: Compact low-cost version, ไม่มีบายพาสในตัว, requires external bypass contactor; only for small-power motors
- PSS / PST: Older legacy models, ค่อย ๆ หมดไป; only available as spare parts for existing installations, ไม่แนะนำสำหรับโครงการใหม่
Optional Communication Accessories (PSTX)
PS-FBPA: 1SFA896312R1002, basic fieldbus adapter
PSTX ANYBUS Modbus RTU: 1SFA899300R1003
คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง



















NH42-63-318x560.png)



