Shinkawa VM-5Z1 Power Supply Unit for Turbine TSI System - คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง

วีแชท: +86-13184948252 วอทส์แอพพ์: 0086-13811255435 อีเมล: kent@bestcontactor.com

เกี่ยวกับ ติดต่อ |

Shinkawa VM-5Z1 Power Supply Unit for Turbine TSI System - คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง

บมจ/

Shinkawa VM-5Z1 Power Supply Unit for Turbine TSI System

แบบอย่าง: VM-5Z1 Power Supply Unit Application: Central power supply for all VM-5 monitor cards (การสั่นสะเทือน, shaft displacement, ความเร็ว, eccentricity etc.) in the same rack, designed per API 670 มาตรฐาน, widely used in thermal power & petrochemical turbine units. Model Definition VM-5: Shinkawa VM-5 TSI monitoring series Z: หน่วยจ่ายไฟ 1: เวอร์ชัน (wide AC/DC input, ...

  • รายละเอียดสินค้า

แบบอย่าง: VM-5Z1 Power Supply Unit

แอปพลิเคชัน: Central แหล่งจ่ายไฟ for all VM-5 monitor cards (การสั่นสะเทือน, shaft displacement, ความเร็ว, eccentricity etc.) in the same rack, designed per API 670 มาตรฐาน, widely used in thermal power & petrochemical turbine units.

  1. คำจำกัดความของโมเดล

VM-5: Shinkawa VM-5 TSI monitoring series

ซี: หน่วยจ่ายไฟ

1: เวอร์ชัน (wide AC/DC input, different from VM-5Z2 / VM-5Z3)

Suffix `/TRP`: Tropical anti-humidity treatment option

  1. ข้อมูลจำเพาะทางไฟฟ้าที่สำคัญ

กำลังไฟฟ้าเข้า (เป็นไปตามมาตรฐาน CE): 85~264VAC / 88~144VDC

Multi-way DC output: +5วี, +17วี, +24วี, -15วี, -30วี (green Power OK LED on front panel)

การใช้พลังงานสูงสุด: ≤265VA

Alarm relay: C-form dry contact, normally energized; คะแนนการติดต่อ: 250VAC 5A / 30VDC 5A

ติดต่อชีวิต: ≥100,000 operations at rated load

ทนต่อแรงดันไฟฟ้า: 2000VAC, 1min between power and ground

ความต้านทานของฉนวน: ≥100MΩ at 500VDC

อุณหภูมิในการทำงาน: 0 ~ 65℃; อุณหภูมิในการจัดเก็บ: -30 ~ +85℃

ความชื้น: 20~95%RH, ไม่ควบแน่น

น้ำหนัก: สูงสุด 2.2 กก

การก่อสร้าง: Sealed plastic housing with aluminum front panel (Munsell N-1.0 grey)

  1. การติดตั้ง & ความเข้ากันได้

Compatible racks: VM-5H4 (10-สล็อต), VM-5W2 (8-สล็อต); ตรงบริเวณ 2 ช่องโมดูล

การทำงาน: OK indicator turns off + relay contact trips upon power failure, sending fault signal to DCS/PLC

Comparison with other power modules

VM-5Z1: Wide AC/DC input, 0~65℃, with Power OK alarm contact

VM-5Z2: Max power ≤135W

VM-5Z3: Single 24VDC input, 0~50℃, no Power OK alarm contact

  1. การใช้งานทั่วไป

Turbines, คอมเพรสเซอร์, fans and other rotating machinery TSI protection systems, paired with VM-5T shaft displacement, VM-5C eccentricity, VM-5V vibration, VM-5Q speed monitor cards. Widely used for legacy TSI retrofits in thermal & petrochemical plants.

  1. อะไหล่ & การทดแทน

สถานะสินค้า: VM-5 series is mature legacy model, gradually replaced by VM-7 series; available stock mostly includes used, refurbished and surplus new spares.

ที่ต้องการทดแทน: Direct same model VM-5Z1; Z2/Z3 cannot be directly swapped due to different input rating, temperature range and alarm logic.

ข้อผิดพลาดทั่วไป: No multi-way DC output; Power OK lamp off; failed alarm contact; ฟิวส์อินพุตขาด.

Operating Principle of Shinkawa VM-5Z1

It is an isolated multi-output switching power supply, dedicated to powering VM-5 rack TSI monitor cards (การสั่นสะเทือน, การกระจัด, speed etc.). It is a critical component of API 670 rotating machinery protection systems with normally energized alarm relay logic (core requirement for TSI systems).

การไหลของสัญญาณ

Input → EMI Rectifier & Filter → High-frequency PWM Inverter → Isolation Transformer → Multi-secondary Rectifier & Stabilization → DC Outputs + การตรวจสอบแรงดันไฟฟ้า + Power OK Alarm Relay

  1. Input Stage (Wide AC/DC Compatibility)

ช่วงอินพุต: 85~264VAC (47–63เฮิร์ตซ์) or 88~144VDC, shared input circuit for AC & ไฟกระแสตรง.

First stage: ตัวกรองอีเอ็มไอ, surge suppression and input fuse.

อินพุตไฟฟ้ากระแสสลับ: Converted to high-voltage DC via rectifier bridge.

อินพุตกระแสตรง: Bypass rectifier directly to post stage.

Core difference between VM-5Z1 and Z2/Z3: universal wide AC/DC input.

  1. High-frequency Inversion & การแยกตัว (Switching Power Core)

High-voltage DC feeds PWM switching tubes to generate high-frequency square waves driving the isolation transformer.

The transformer provides galvanic isolation between primary power side and secondary sensor/card power side (2000VAC withstand voltage).

The primary PWM chip automatically adjusts duty cycle to stabilize all secondary outputs, adopting a multi-output common voltage regulation architecture.

  1. Independent Secondary Rectification, การกรอง & Stabilization

Multiple independent secondary windings generate 5 DC power rails for rack logic and sensor circuits:

+5วี: Digital circuits, CPU and logic chips (Power OK indicator is powered by this rail, main judgment reference)

+17วี: Signal conditioning circuits on monitor boards

+24วี: Partial sensor excitation & loop power supply

-15วี, -30วี: Eddy current probe preamplifiers & analog op-amp negative power

Each rail has independent LC filtering and current limiting to keep low ripple for weak eddy current signal acquisition.

  1. การตรวจสอบแรงดันไฟฟ้า & Power OK Alarm Circuit (คุณสมบัติที่สำคัญ)

Built-in comparator circuit continuously monitors all 5 แรงดันไฟฟ้าขาออก:

All outputs within tolerance window: Green OK lamp ON, relay remains energized (Normally Energized).

Any rail under/over voltage, power loss or internal failure: OK lamp OFF, relay de-energizes and trips, C-form dry contact sends fault signal to DCS.

✅ Critical point: Normally Energized. Relay stays energized under normal operation; releases upon power loss or fault. This is the industry standard fail-safe alarm logic required by TSI systems to avoid missing power failure alarms caused by broken wiring.

  1. Built-in Protection Functions

กระแสไฟขาออกเกิน & ป้องกันการลัดวงจร: Current limiting hiccup mode, auto recovery after fault cleared.

การป้องกันแรงดันไฟฟ้าเกิน: Latch shutdown, requires power cycle reset.

การป้องกันความร้อนสูงเกินไป: Shuts down output when overtemperature occurs.

The whole unit is fully potted and sealed for anti-vibration and anti-humidity, suitable for power plant and petrochemical field environments; the `/TRP` suffix stands for tropical anti-humidity version.

  1. Coordination with VM-5 Rack

VM-5Z1 occupies 2 slots on VM-5W2 (10-สล็อต) / VM-5H4 (8-สล็อต) แร็ค. Multi-way DC power is distributed to all VM-5 cards via backplane copper busbars, eliminating separate power supplies for each monitor card.

Redundant dual power configuration (two VM-5Z1 units) is supported with backplane current sharing; single power failure will not interrupt TSI monitoring & protection output, complying with API 670 ความต้องการ.

  1. Fault Troubleshooting Based on Operating Principle
  2. OK lamp off with no alarm: Main +5V rail undervoltage, monitoring circuit triggers fault directly.
  3. Lamp ON but DCS reports power fault: Burnt relay coil or oxidized contacts (high failure point for long-term energized relays).
  4. One rail low voltage while others normal: Failed rectifier diode or aging filter capacitor on that secondary winding.
  5. Hiccup protection immediately after power-on: Short circuit on backplane caused by faulty monitor card pulling down the power supply.

Full VM-5 TSI Rack Configuration List (Matching VM-5Z1 Power Supply)

แร็ค: VM-5W2 (10-สล็อต, supports dual redundant power) / VM-5H4 (8-สล็อต, single power common)

Core layout constraint: One VM-5Z1 occupies 2 สล็อต

  1. All VM-5 Monitor Card Models & ฟังก์ชั่น
แบบอย่างคำอธิบายช่องMeasurement Applicationประเภทเซนเซอร์
VM‑5VShaft Vibration Monitorช่องสัญญาณคู่Radial relative shaft vibrationวีเค / FK Eddy Current Probe
VM‑5TThrust / Shaft Position Monitorช่องสัญญาณคู่Thrust bearing axial displacementวีเค / FK Eddy Current Probe
VM‑5CRotor Eccentricity Monitorช่องสัญญาณคู่Rotor eccentricity (barring & startup)Eddy current + speed pulse
VM‑5DDifferential Expansion Monitorช่องสัญญาณคู่Rotor‑casing differential expansionEddy Current Probe
VM‑5ECasing Expansion Monitorช่องสัญญาณคู่Absolute casing thermal growthEddy current / LVDT
VM‑5Qความเร็ว / Zero Speed Monitorช่องสัญญาณคู่Rotational speed, ทิศทาง, zero speed, overspeed protectionMagnetic pickup, gear tooth probe
VM‑5MComposite Vibration Monitorช่องสัญญาณคู่Relative + absolute vibration (เพลา + bearing housing vibration)Eddy current + velocity transducer
VM‑5XValve Position Monitorช่องสัญญาณคู่Control valve opening, actuator travelLVDT

Backplane Accessories (No front panel slot occupation)

VM-5Y1 / VM-5Y2 / VM-5Y3: Relay Output Unit, aggregates Alert/Danger dry contacts from all cards and sends unified alarm signals to DCS/ETS; C-form contacts with normally energized logic.

VM-5COM: โมดูลการสื่อสาร (RS485 Modbus RTU), uploads 4-20mA measured values and alarm status to RV-200 diagnostic host.

VM-5Z0: Power failure hold-up unit (0.2s buffer for momentary power loss, optional for critical units).

โครงการ ก: VM-5W2 (10-สล็อต)|Single Power Configuration (1×VM-5Z1)

VM-5Z1 occupies 2 สล็อต; remaining 8 slots for monitor cards

Standard Turbine TSI Layout (10 สล็อต)

  1. Slot 1~2: VM-5Z1 (หน่วยจ่ายไฟ)
  2. สล็อต 3: VM-5T Thrust Shaft Displacement
  3. สล็อต 4: VM-5C Rotor Eccentricity
  4. สล็อต 5: VM-5Q Speed / โอเวอร์สปีด
  5. สล็อต 6: VM-5D Differential Expansion
  6. สล็อต 7: VM-5E Casing Expansion
  7. สล็อต 8: VM-5V Shaft Vibration 1
  8. สล็อต 9: VM-5V Shaft Vibration 2
  9. สล็อต 10: VM-5M Composite Vibration (Bearing Vibration spare)

Backplane accessories: VM-5Y Relay Unit + VM-5COM Communication Module (backplane mounted, no slot occupied)

โครงการบี: VM-5W2 (10-สล็อต)|Dual Redundant Power (API670 Standard, Most Popular for Power Plants)

Two VM-5Z1 units (2 slots each) → total 4 slots occupied; 6 slots left for monitor cards

  1. สล็อต 1-2: VM-5Z1 1 (กำลังหลัก)
  2. สล็อต 3-4: VM-5Z1 2 (Standby Power, hot redundant with backplane current sharing)
  3. สล็อต 5: VM-5T Thrust Displacement
  4. สล็อต 6: VM-5C Rotor Eccentricity
  5. สล็อต 7: VM-5Q Rotational Speed
  6. สล็อต 8: VM-5D Differential Expansion
  7. สล็อต 9: VM-5V Shaft Vibration A
  8. สล็อต 10: VM-5V Shaft Vibration B

✅ Redundancy Logic: Two independent power inputs with diode current sharing on backplane. Failure of one VM-5Z1 triggers Power OK alarm without interrupting TSI monitoring & protection output, fully complying with API670 rotating machinery protection standard.

โครงการค: VM-5H4 (8-สล็อต)|Single VM-5Z1 (Small Turbines, คอมเพรสเซอร์ & แฟนๆ)

VM-5Z1 occupies 2 สล็อต; remaining 6 slots available

Compact Compressor/Fan TSI Configuration

  1. สล็อต 1-2: VM-5Z1
  2. สล็อต 3: VM-5V Shaft Vibration 1
  3. สล็อต 4: VM-5V Shaft Vibration 2
  4. สล็อต 5: VM-5T Shaft Displacement
  5. สล็อต 6: VM-5Q Rotational Speed
  6. สล็อต 7: VM-5M Composite Vibration
  7. สล็อต 8: Spare monitor card slot

Front-end Sensor Matching List

VK-202A / VK-302P / VK-602P: Eddy current displacement probes (shaft vibration, ตำแหน่ง, eccentricity, differential expansion)

FK series: High-temperature eddy current probes (high-temperature casing area)

RV Magnetic Pickup: Speed input for VM-5Q monitor

Velocity Transducer: Bearing vibration input for VM-5M

LVDT: VM-5E casing expansion & VM-5X valve position measurement

การคัดเลือก & Layout Pitfall Avoidance

  1. VM-5Z1 always occupies 2 สล็อต; cannot be treated as single-slot module. Z2/Z3 also take 2 slots and cannot be mixed due to different input rating and alarm contact logic.
  2. All monitor cards have two fully independent channels, each with separate Alert (Pre-alarm) and Danger (การเดินทาง) C-form normally energized relay contacts; supports latching or auto reset.
  3. 4-20เอาท์พุทแบบอะนาล็อก mA: Each card has built-in recorder output; alternatively all values can be uploaded centrally via Modbus through VM-5COM.
  4. Tropical version: Add `/TRP` suffix to all card models for coastal & high-humidity power plants (anti-corrosion & anti-moisture treatment).
  5. Expansion limit: Dual power 10-slot rack can only accommodate max 6 monitor cards; additional VM-5 racks are required for more measurement points.

Recommended Spare Parts Kit for One Rack

VM-5Z1 Power Supply Unit (full spare)

Common monitor cards: VM-5V, VM-5T, VM-5Q

Eddy current probes, extension cables and preamplifiers

VM-5Y relay unit & VM-5COM communication card

Full VM-5 TSI I/O List (VM-5W2 10-slot Rack, Dual Redundant VM-5Z1 Power Supply)

Rack Layout Recap: Slot1-2 VM-5Z11; Slot3-4 VM-5Z12; Slot5 VM-5T; Slot6 VM-5C; Slot7 VM-5Q; Slot8 VM-5D; Slot9 VM-5V(ก); Slot10 VM-5V(บี)

Backplane Modules: VM-5Y (Alarm Aggregation Relay), VM-5COM (Modbus RTU Communication)

Rules:

  1. Every monitor card has two independent channels CH1 / CH2. Each channel has separate Alert (Pre-alarm) & Danger (การเดินทาง) C-form normally energized dry contacts plus one isolated 4-20mA analog output.
  2. โมดบัส: VM-5COM acts as Modbus slave; register addresses shown below are reference offsets (final addresses follow Shinkawa manual 6H14).
  3. Dry contacts are divided into two groups: Local card alarm contacts and VM-5Y aggregated alarm contacts (to ETS/DCS).
  4. Power failure signals: Independent Power OK contacts from each VM-5Z1; only digital alarm, ไม่มีเอาต์พุตแบบอะนาล็อก.

ส่วนหนึ่ง 1: Dry Contact List (C-form, Normally Energized)

Card Modelช่องชื่อสัญญาณประเภทการติดต่อ
VM‑5Z1 #1—พาวเวอร์ซัพพลาย #1 ความผิดพลาด (Power Fail)C‑form, Normally Energized
VM‑5Z1 #2—พาวเวอร์ซัพพลาย #2 ความผิดพลาด (Power Fail)C‑form, Normally Energized
VM‑5T Thrust Displacementช1Thrust Displacement A Alert (Pre‑alarm)C‑form, Normally Energized
VM‑5T Thrust Displacementช1Thrust Displacement A Danger (การเดินทาง)C‑form, Normally Energized
VM‑5T Thrust DisplacementCH2Thrust Displacement B Alert (Pre‑alarm)C‑form, Normally Energized
VM‑5T Thrust DisplacementCH2Thrust Displacement B Danger (การเดินทาง)C‑form, Normally Energized
VM‑5C Eccentricityช1Rotor Eccentricity A AlertC‑form, Normally Energized
VM‑5C Eccentricityช1Rotor Eccentricity A DangerC‑form, Normally Energized
VM‑5C EccentricityCH2Rotor Eccentricity B AlertC‑form, Normally Energized
VM‑5C EccentricityCH2Rotor Eccentricity B DangerC‑form, Normally Energized
VM‑5Q Speed / ความเร็วเป็นศูนย์ช1Speed A AlertC‑form, Normally Energized
VM‑5Q Speed / ความเร็วเป็นศูนย์ช1Speed A Danger (Overspeed Trip)C‑form, Normally Energized
VM‑5Q Speed / ความเร็วเป็นศูนย์CH2Speed B AlertC‑form, Normally Energized
VM‑5Q Speed / ความเร็วเป็นศูนย์CH2Speed B Danger (Overspeed Trip)C‑form, Normally Energized
VM‑5D Differential Expansionช1Differential Expansion A AlertC‑form, Normally Energized
VM‑5D Differential Expansionช1Differential Expansion A DangerC‑form, Normally Energized
VM‑5D Differential ExpansionCH2Differential Expansion B AlertC‑form, Normally Energized
VM‑5D Differential ExpansionCH2Differential Expansion B DangerC‑form, Normally Energized
VM‑5V Shaft Vibration Aช1Shaft Vibration A‑X AlertC‑form, Normally Energized
VM‑5V Shaft Vibration Aช1Shaft Vibration A‑X DangerC‑form, Normally Energized
VM‑5V Shaft Vibration ACH2Shaft Vibration A‑Y AlertC‑form, Normally Energized
VM‑5V Shaft Vibration ACH2Shaft Vibration A‑Y DangerC‑form, Normally Energized
VM‑5V Shaft Vibration Bช1Shaft Vibration B‑X AlertC‑form, Normally Energized
VM‑5V Shaft Vibration Bช1Shaft Vibration B‑X DangerC‑form, Normally Energized
VM‑5V Shaft Vibration BCH2Shaft Vibration B‑Y AlertC‑form, Normally Energized
VM‑5V Shaft Vibration BCH2Shaft Vibration B‑Y DangerC‑form, Normally Energized
Alarm Aggregation Unit—TSI System General Danger AlarmC‑form
Alarm Aggregation Unit—TSI System General Pre‑alarmC‑form

การจัดอันดับการติดต่อ: 250VAC 5A / 30VDC 5A. Normally Energized = Closed under normal operation, open upon fault / การสูญเสียพลังงาน, fully complying with API670 fail-safe alarm requirement.

ส่วนหนึ่ง 2: 4-20mA Analog Output List (Isolated AO on each card)

สล็อตCard Modelช่องชื่อสัญญาณช่วงทั่วไป (Configurable on card)เอาท์พุต
5VM‑5Tช1Thrust Displacement A-1.0 ~ +1.0 มม4−20mA
5VM‑5TCH2Thrust Displacement B-1.0 ~ +1.0 มม4−20mA
6VM‑5Cช1Rotor Eccentricity A0 ~ 0.2 มม4−20mA
6VM‑5CCH2Rotor Eccentricity B0 ~ 0.2 มม4−20mA
7VM‑5Qช1Rotational Speed A0 ~ 6000 รอบต่อนาที4−20mA
7VM‑5QCH2Rotational Speed B0 ~ 6000 รอบต่อนาที4−20mA
8VM‑5Dช1Differential Expansion A-5 ~ +25 มม4−20mA
8VM‑5DCH2Differential Expansion B-5 ~ +25 มม4−20mA
9VM‑5Vช1Shaft Vibration A X‑axis0 ~ 200 ไมโครเมตร4−20mA
9VM‑5VCH2Shaft Vibration A Y‑axis0 ~ 200 ไมโครเมตร4−20mA
10VM‑5Vช1Shaft Vibration B X‑axis0 ~ 200 ไมโครเมตร4−20mA
10VM‑5VCH2Shaft Vibration B Y‑axis0 ~ 200 ไมโครเมตร4−20mA

บันทึก: 4mA = lower range limit; 20mA = upper range limit. Two independent AO channels per card. This analog signal is physically separated from Modbus communication for redundant data acquisition.

ส่วนหนึ่ง 3: Modbus RTU Point List (VM-5COM, 16-bit Holding Registers)

Default communication parameters: 9600, 8, เอ็น, 1; slave address set via DIP switch; register addresses are reference values (final mapping follows Shinkawa manual 6H14).

Data type: Measured values (INT16 with scaling factor); alarm status (Bit mapped UINT16).

Register AddressTag Nameคำอธิบายประเภทข้อมูล
40001Thrust_Displacement_A_CH1Axial displacement measurementINT16
40002Thrust_Displacement_B_CH2Axial displacement measurementINT16
40003Eccentricity_A_CH1Rotor eccentricity measurementINT16
40004Eccentricity_B_CH2Rotor eccentricity measurementINT16
40005Speed_A_CH1Rotational speed measurementINT16
40006Speed_B_CH2Rotational speed measurementINT16
40007Diff_Expansion_A_CH1Differential expansion measurementINT16
40008Diff_Expansion_B_CH2Differential expansion measurementINT16
40009Shaft_Vib_A_X_CH1Shaft vibration peak‑peak valueINT16
40010Shaft_Vib_A_Y_CH2Shaft vibration peak‑peak valueINT16
40011Shaft_Vib_B_X_CH1Shaft vibration peak‑peak valueINT16
40012Shaft_Vib_B_Y_CH2Shaft vibration peak‑peak valueINT16
40100Channel_Alarm_Word_1Bit0~Bit11: Channel Alert/Danger + sensor breakUINT16
40101Power_Status_WordBit0: VM‑5Z1#1 Fault; Bit1: VM‑5Z1#2 FaultUINT16
40102Rack_System_Statusการสื่อสาร, card self‑test & backplane fault flagsUINT16

Bit Definition for Register 40100 (Channel Alarm Word)

Bit0: VM-5T CH1 Alert

Bit1: VM-5T CH1 Danger

Bit2: VM-5T CH2 Alert

Bit3: VM-5T CH2 Danger

Bit4: VM-5C CH1 Alert

Bit5: VM-5C CH1 Danger

Bit6: VM-5C CH2 Alert

Bit7: VM-5C CH2 Danger

Subsequent bits follow in sequence and can be extended according to actual measurement points.

ส่วนหนึ่ง 4: Design Notes & Signal Redundancy

  1. ETS Trip Logic: All Danger trip contacts shall adopt 1-out-of-2 or 2-out-of-2 voting logic per turbine protection standards. Power fault contacts shall only generate alarm, not initiate ETS trip.
  2. Triple Redundant Signal Path: Hard relay contacts (safety trip) + 4-20mA analog (DCS trend) + Modbus RTU (host diagnostic data) are fully independent physical links.
  3. Sensor Break Detection: Every monitor card has built-in probe break detection; open circuit will trigger Alert/Danger alarm and set corresponding bit in Modbus status word.
  4. If you need a simplified I/O list for single-power VM-5W2 / VM-5H4 rack, I can provide a trimmed version immediately.

ส่วนหนึ่ง 5: I/O Quantity Summary (Dual Power Scheme)

Power digital contacts: 2 คะแนน

Channel Alert pre-alarm contacts: 12 คะแนน

Channel Danger trip contacts: 12 คะแนน

VM-5Y aggregated alarm contacts: 2 คะแนน

4-20mA analog output channels: 12 ช่อง

Modbus measurement registers: 12 ชิ้น; status registers: 3 ชิ้น

ก่อนหน้า:

ทิ้งคำตอบไว้

ฝากข้อความ