Schneider BMXDDI3202KH Digital Input Module - คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง

วีแชท: +86-13184948252 วอทส์แอพพ์: 0086-13811255435 อีเมล: kent@bestcontactor.com

เกี่ยวกับ ติดต่อ |

Schneider BMXDDI3202KH Digital Input Module - คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง

บมจ/

Schneider BMXDDI3202KH Digital Input Module

ชุด: โมดิคอน X80 (บมจ.เอ็ม340) Model explanation: BMXDDI3202KH = BMXDDI3202K + ชม; H = Conformal Coating version for harsh environments. Electrical specifications are identical to BMXDDI3202K. Only the PCB is coated with conformal coating for moisture-proof, mould-proof and salt-spray resistance, suitable for ports, โรงงานเคมี, underground sites, high-humidity and dusty conditions. ✅ Basic Specifications Type: ...

  • รายละเอียดสินค้า

ชุด: โมดิคอน X80 (บมจ.เอ็ม340)

Model explanation: BMXDDI3202KH = BMXDDI3202K + ชม; H = Conformal Coating version for harsh environments. Electrical specifications are identical to BMXDDI3202K. Only the PCB is coated with conformal coating for moisture-proof, mould-proof and salt-spray resistance, suitable for ports, โรงงานเคมี, underground sites, high-humidity and dusty conditions.

✅ ข้อมูลจำเพาะพื้นฐาน

พิมพ์: 32-channel isolated digital input module, จม (positive logic)

แรงดันไฟฟ้าขาเข้า: 24กระแสตรง, sensor supply range 19~30VDC

Input current per channel: 2.5mA @24V

ตรรกะ 1: ≥11V / ≥2mA; ตรรกะ 0: ≤5V / ≤0.5mA

ความต้านทานอินพุต: 9600โอ้

เวลาตอบสนอง: Typical 4ms, maximum 7ms

การแยกตัว: Channel-to-channel isolation, ความต้านทานของฉนวน >10MΩ at 500VDC

สายไฟ: Compatible with 2-wire / 3-wire proximity switches (IEC61131-2 Type3, IEC60947-5-2). Input parallel connection is not allowed

ตัวเชื่อมต่อ: Single 40-pin FCN interface, single slot, รองรับ hot-swap

การใช้พลังงาน: ≤3.9W; Typical backplane 3.3V consumption 121mA

Enclosure protection: IP20

📌 Matching Cables (40-pin FCN)

  1. BMXFCWxxx3: Pre-wired loose cables (3m/5m/10m: BMXFCW303 / BMXFCW503 / BMXFCW1003)
  2. BMXFCCxxx3: Pre-assembled HE10 terminal cables (0.5/1/2/3/5/10ม)

🧩 Compatible CPUs

Full Modicon M340 series: BMXP34xx00, BMXP34xx20 (including H versions). General X80 rack, configured via Unity Pro software.

⚖️ Model Comparison

BMXDDI3202K: รุ่นมาตรฐาน, no conformal coating, for conventional control cabinets

BMXDDI3202KH: Conformal coated version for harsh environments. Fully interchangeable in program, pinout and cabling.

📎 การอ้างอิงการเลือกทางเลือก

Same-platform replacement: No drop-in equivalent. For fewer points, refer to BMXDDI1602K(ชม) (16-point Sink DI).

ทดแทนภายในประเทศ: Verify sink logic, isolation and filter time, suitable for domestic PLC remote IO modules.

⚠️ Troubleshooting Tips

  1. No input signal: Check 24V supply, sensor polarity (จม, signal connects to 0V), broken pins in prefabricated cables.
  2. กระพริบ / การกระตุ้นที่ผิดพลาด: Check voltage drop and shielding. This module uses fixed hardware filter; filter parameters cannot be modified by software.
  3. Prefer KH version for humid and corrosive environments; standard K version is prone to PCB corrosion under long-term high humidity.

ชไนเดอร์ อินพุตดิจิตอล (จาก) Module List by Platform

บันทึก: Suffix H = Conformal coating for harsh environments. X80 platform compatible with M340 / M580; Sink = sinking input, Source = sourcing input; AC = AC input.

  1. โมดิคอน X80 (BMX series, M340 / M580)

DC Digital Input (BMXDDI)

แบบอย่างคะแนนคำอธิบาย
BMXDDI1602K / BMXDDI1602KH1624กระแสตรง, จม
BMXDDI1603K / BMXDDI1603KH1648กระแสตรง, จม
BMXDDI1604T16125กระแสตรง, จม, อุณหภูมิกว้าง
BMXDDI3202K / BMXDDI3202KH3224กระแสตรง, จม (the model you enquired)
BMXDDI3203K / BMXDDI3203KH3248กระแสตรง, จม
BMXDDI3232K / BMXDDI3232KH3212/24กระแสตรง, Sink/Source configurable
BMXDDI6402K / BMXDDI6402KH6424กระแสตรง, จม

AC Digital Input (BMXDAI)

แบบอย่างคะแนนคำอธิบาย
BMXDAI08058220VAC
บีเอ็มเอ็กซ์ได08148100~120VAC
BMXDAI16021624VAC/24VDC, แหล่งที่มา
BMXDAI16031648VAC
บีเอ็มเอ็กซ์ได160416100~120VAC
BMXDAI161416220VAC

X80 Safety DI (Safety PLC dedicated)

แบบอย่างคะแนนคำอธิบาย
BMXSDI160216Safety digital input, 24กระแสตรง
  1. ซีรีส์ TM3 (Expansion for M221/M241/M251/M262 Compact PLC)
แบบอย่างคะแนนคำอธิบาย
TM3DI8824กระแสตรง, ขั้วต่อสกรู
TM3DI8G824กระแสตรง, spring clamp terminals
TM3DI8A8120VAC
TM3DI161624กระแสตรง, ขั้วต่อสกรู
TM3DI16G1624กระแสตรง, spring clamp terminals
TM3DI16K1624กระแสตรง, HE10 connector
TM3DI32K3224กระแสตรง, HE10 connector
  1. Advantys STB Distributed Remote IO
แบบอย่างคะแนนคำอธิบาย
STBDDI37251624VDC Sink
STBDDI3420824VDC Sink
STBDDI3610424VDC Sink
STBDAI02002100~240VAC
STBDAI04004100~240VAC
  1. หมายเหตุเพิ่มเติม
  2. X80 naming rule: `BMXDDI` = DC DI; `BMXDAI` = AC DI; `K` standard, `KH` conformal coated.
  3. K and KH variants of the same model are fully interchangeable in pinout, programming and backplane interface, only differing in PCB protection.
  4. Mixed I/O modules (DI+DO) such as BMXDDM16022 are excluded from this table.

Application Scenarios of Schneider Digital Input (จาก) โมดูล (X80/STB/TM3, ฯลฯ)

Core function of DI modules: Collect binary switch signals, transfer ON/OFF status from external dry contacts, เซ็นเซอร์, ปุ่มกด, limit switches and auxiliary contacts of contactors to PLC. It only detects on/off status and does not process analog signals. The following is sorted by industry and signal type, applicable to BMXDDI3202KH and other X80 modules.

  1. General Signal Acquisition (Used across all industries)
  2. ปุ่มกด, สวิตช์เลือก, ปุ่มหยุดฉุกเฉิน

Local cabinet operation, remote control boxes, E-stop signals (general E-stop; safety E-stop should use dedicated safety DI module BMXSDI1602).

  1. ลิมิตสวิตช์, สวิตช์การเดินทาง, สวิตช์ความใกล้ชิด, เซ็นเซอร์ตาแมว

Equipment position detection: cylinder confirmation, สวิตช์ประตู, baffle limit for material level, การตรวจจับการปรากฏตัวของวัตถุ.

BMXDDI3202KH is 24VDC Sink, compatible with mainstream NPN proximity switches.

  1. Auxiliary contacts of contactors / รีเลย์, circuit breaker status feedback

Motor running feedback, VFD ready feedback, circuit breaker open/close status, thermal relay fault signals.

  1. Dry contact signals

Fire alarm systems, การควบคุมการเข้าถึง, damper/valve position feedback in HVAC, float level switches.

  1. เครื่องปรับอากาศ

วิ่ง / fault feedback of fans and water pumps

Differential pressure switches, frost protection switches, air damper / water valve end-position feedback

Filter differential pressure alarm, high/low float level switches

Feedback of smoke exhaust dampers and fire dampers

Conformal coated KH versions (BMXDDIxxxxKH) are preferred for humid and dusty machine rooms.

  1. การบำบัดน้ำ, น้ำประปา & การระบายน้ำ, พืชน้ำเสีย

Level switches (ระดับสูง, ระดับต่ำ, overflow)

Pump run, ความผิดพลาด, hand-auto status

Limit signals for bar screens and sludge scrapers

Pulse signals from flow meters (high-speed pulses require dedicated high-speed counter modules; standard DI is not suitable for high-frequency pulses)

วาล์วเปิดอยู่ / closed position feedback

KH coated modules are widely used in corrosive, high-humidity wastewater sites.

  1. บรรจุภัณฑ์, สายการประกอบ & สายการผลิตอัตโนมัติ

Photoelectric detection for material presence / missing material

Cylinder and clamp confirmation signals

Conveyor belt jam and deviation switches

Barcode detection, silo level switches

Safety gate and guard door status signals

BMXDDI6402K (64-point DI) is commonly used for high-point-count lines to save slots.

  1. Crane Systems, กำลังลำเลียง & Warehouse Logistics

Crane travel limits, upper/lower hard limits, buffer switches

Pallet in-position, bay detection

Roller conveyor deviation and E-stop loop feedback

Roller shutter and guard door status

  1. Power Distribution Rooms & Energy Monitoring

Circuit breaker and disconnector open/close position feedback for high-voltage cabinets

Cabinet door interlock, earthing switch status

Transformer thermostat switches, cooling fan feedback

DC panel fault alarm dry contacts

BMXDAI AC DI modules are often used for 220VAC cabinet signals.

  1. น้ำมัน & แก๊ส, อุตสาหกรรมเคมี, พอร์ต (สภาพแวดล้อมที่รุนแรง)

Valve position feedback, pump status, dry contact output of combustible gas detectors

Limit switches and door interlocks for trestle and quay equipment

Salt spray, high humidity and condensation → select KH conformal coated versions (BMXDDI3202KH etc.). Standard K versions are vulnerable to corrosion.

  1. ระบบอัตโนมัติในอาคาร, Fire Protection & สถานีสูบน้ำ

Dry contact alarms from fire host, sprinkler pressure switches

Elevator interlock signals, smoke exhaust fan status

Rainwater pumps, sump tank level monitoring

✅ Quick Selection Guide by Scenario

Normal indoor control cabinet, สภาพแวดล้อมที่แห้ง: BMXDDIxxxK

เคมี / ท่าเรือ / ความชื้นสูง & สเปรย์เกลือ: BMXDDIxxxKH (การเคลือบตามแบบ)

220VAC contact signals: BMXDAI AC DI

วงจรความปลอดภัย, ประตูนิรภัย, safety E-stop: BMXSDI safety DI

เครื่องจักรขนาดเล็ก, low I/O count: TM3DI series

Distributed remote IO with scattered field points: STB Advantys remote DI

⚠️ Scope Limitations (What DI modules cannot do)

  1. Cannot directly measure 4-20mA or temperature (AI analog modules required)
  2. Standard DI is not suitable for high-frequency pulse counting (high-speed counter module required)
  3. Safety functions shall not be implemented via ordinary DI; dedicated safety DI modules are mandatory.

ก่อนหน้า:

ต่อไป:

ทิ้งคำตอบไว้

ฝากข้อความ