Mitsubishi FX5U-32MT Kompakt-SPS

Modellsegmentdefinition

Full model analysis: FX5U-32MT-XX

Segment	Bedeutung	Beschreibung
FX	Basisseriencode	Mitsubishi FX series compact PLC
5U	Series generation & Typ	5th-generation iQ-F series; U = Standard CPU (differentiated from UC compact type)
32	Gesamtzahl der E/A-Punkte	32 points total (16 Eingänge / 16 Ausgänge)
M	Power supply type	M = Mixed power (AC/DC); D = DC24V power
T	Ausgabetyp	T = Transistor output (Senke/Quelle); R = Relay output
XX	Suffix code	Terminaltyp / specification:
		– /DS: Gleichstrom + Schraubklemme
		– /ES: AC power + Schraubklemme
		– /ESS: AC power + Spring terminal
		– /DSS: Gleichstrom + Spring terminal

Kernspezifikationsparametertabelle

2.1 Grundleistung

Parameter	Spezifikation	Bemerkungen
CPU Processor	32-bit RISC	High-speed operation, Basic instruction: 0.065渭s/step
Programmspeicher	64KB (max expandable to 16MB)	SD card expansion supported
Datenspeicher	32KB (erweiterbar)	Includes file registers, special registers, usw.
I/O Control Mode	Cyclic scan + Interrupt	Supports high-speed response processing
Max I/O Points	Local 256 + Fernbedienung 256 = 512 Punkte	Bis zu 16 expansion modules connectable
Nennleistung	AC100-240V (ES/ESS) or DC24V (DS/DSS)	Voltage fluctuation 卤10%, 50/60Hz
Stromverbrauch	Ca. 30W (ES type) / 15W (DS type)	Subject to specific model

2.2 E/A-Konfiguration (16IN / 16AUS)

Typ	Spezifikation	Channel Characteristics
Digitaler Eingang	16-point DC24V, Sink/Source compatible	X0-X17; Response time 0.05~10ms adjustable; Input impedance 3k惟; Input current 4.7mA
Digitaler Ausgang	16-point Transistor (NPN/PNP optional)	Y0-Y17; Max load 2A/point, 16A/common terminal; Response time 0.1ms; High-speed pulse output supported
Built-in Analog	2KI + 1ZUM	Eingang: 12-bisschen, 0-10V/4-20mA
Built-in Analog	2KI + 1ZUM	Ausgabe: 12-bisschen, 0-10V/4-20mA

2.3 High-Speed Function & Positionierung

Funktion	Spezifikation	Anwendungsszenario
High-Speed Counter	Max 6ch × 200kHz + 2ch × 10kHz	Pulse counting, frequency measurement
Impulsausgang	4-axis × 200kHz (Y0-Y3)	Stepper / Servo positioning control
Positioning Function	Linear interpolation, Circular interpolation, Electronic gear / Cam	Multi-axis synchronous control
High-Speed Interrupt	Multiple interrupt sources supported (Eingang / Timer / Kommunikation)	Real-time response for critical events

2.4 Kommunikationsschnittstellen

Schnittstellentyp	Menge	Spezifikation	Protokollunterstützung
Ethernet	1 Hafen	RJ45, 10/100Mbit/s	Modbus TCP, MC Protocol, SLMP, EtherNet/IP
RS-485	1 Hafen	Terminal block, 2-wire/4-wire selectable	Modbus RTU, Non-protocol communication
Erweiterungsport	1 Hafen	Dedicated expansion bus	Connect FX5 series expansion & special function modules

Zubehörliste

3.1 Erweiterungsmodule

Modultyp	Empfohlenes Modell	Funktionsbeschreibung
Digital I/O Expansion	FX5-16ER/ES, FX5-32ER/ES	16/32-point relay output expansion
Digital I/O Expansion	FX5-16ET/ES, FX5-32ET/ES	16/32-point transistor output expansion
Analog Expansion	FX5-4AD, FX5-4DA	4-channel analog input/output expansion
Temperature Module	FX5-4AD-TC, FX5-4AD-PT	4-channel Thermocouple/RTD input
Kommunikationsmodul	FX5-ENET/IP, FX5-232-BD	Ethernet expansion, RS-232 communication expansion
Positioning Module	FX5-1PG, FX5-20PG	1-axis/2-axis pulse positioning expansion (Max 500kHz)

3.2 Leistung & Verbindungszubehör

Zubehörtyp	Modell	Zweck
Memory Backup Battery	FX3U-32BL	Power-off retention for program & Daten (Service life approx. 5 Jahre)
Expansion Power Module	FX5-C1PS-5V	Power supply for FX5U (DC-Typ) expansion modules
Bus Converter	FX5-CNV-BUS	Compatibility conversion for FX5 to FX3 series modules
SD Memory Card	Max 32GB	Program storage, Datenprotokollierung, firmware upgrade
Montageschiene	DIN standard rail	35mm Breite, for PLC main unit & module installation
Terminal Cover	Original factory part	Protect I/O terminals against dust and short circuit

3.3 Programmierung & Debugging-Tools

Tool Type	Modell	Funktion
Programmiersoftware	GX Works3	Supports Ladder Diagram, SFC, ST and other languages; Version V1.047Z or above required
Programming Cable	USB-SC09-FX	Connect PC to PLC programming port (RS-422)
Ethernet Cable	CAT5e & über	For Ethernet communication and programming
Handheld Programmer	FX5U-USB-PRG	On-site quick debugging and program modification

Wettbewerber-Ersatz / Markenübergreifender Vergleich

Marke	Äquivalentes Modell	Hauptunterschiede	Anwendungsszenario
Siemens	S7-1214C DC/DC/DC	• Native Profinet, stronger network capability	Automation production line, multi-PLC networking, SCADA connection
		• Price 1.5~2 times of FX5U
		• TIA Portal has steep learning curve
Schneider	M241 CPU 16T	• Built-in Modbus TCP/RTU, CANopen supported	Small process industry, Gebäudeautomation
		• Weak motion control performance
		• Price close to FX5U
Omron	CP1H-X40DT-D	• 4-channel built-in analog I/O	Hybrid control, small automated equipment
		• Equivalent high-speed counting / pulse output performance
		• User-friendly CX-One software
Innovation	H5U-32MT-XP	• Domestic alternative, price ~70% of FX5U	Kostensensible Projekte, domestic replacement demand
		• Compatible with Mitsubishi instruction system
		• EtherCAT bus supported
Delta	DVP-32ES200T	• Lower price (~60% of FX5U)	Standalone simple control, Projekte mit begrenztem Budget
		• Simplified functions, weak high-speed performance
		• Fewer communication interfaces

Auswahlrichtlinien & Alternative Lösungen

5.1 Kernauswahlkriterien

Auswahldimension	Empfohlene Konfiguration	Not Recommended Scenario
I/O-Punkte	16IN/16OUT, ideal for small equipment	Über 32 points requires expansion; recommend FX5U-64MT directly
Ausgabetyp	Transistor output for high-speed switching & pulse control	Large inductive load with frequent on-off; choose FX5U-32MR relay type
Leistungstyp	• Industrial mains: AC-Typ (ES/ESS)	Voltage fluctuation site requires voltage stabilizer
Leistungstyp	• Mobile/Battery supply: DC-Typ (DS/DSS)	Voltage fluctuation site requires voltage stabilizer
Kommunikationsanforderung	Built-in Ethernet + RS485 meets most scenarios	Profibus, DeviceNet and other buses need expansion modules
Bewegungssteuerung	4-axis 200kHz pulse output for small positioning	Über 4 axes or higher frequency (>500kHz); use FX5U + positioning module
Terminaltyp	• Vibration environment: Spring terminal (ESS/DSS)	Frequent wiring replacement; recommend spring terminal
Terminaltyp	• Normal environment: Schraubklemme (ES/DS)	Frequent wiring replacement; recommend spring terminal

5.2 Empfohlene alternative Lösungen

Anwendungsszenario	Best Replacement Model	Grund
Kostenpriorität	Inovance H5U-32MT-XP	Similar functions, ~30% price reduction, good domestic technical support
Enhanced Network	Siemens S7-1214C	Stronger Profinet capability, suitable for production line integration
I/O Expansion Demand	FX5U-64MT	64 I/O points onboard, reduce expansion module cost
High Analog Demand	FX5U-32MT+FX5-4AD+FX5-4DA	Expand to 6AI + 5ZUM
Enhanced Motion Control	FX5U-32MT+FX5-20PG	Add 2-axis 500kHz high-speed positioning
Kompaktes Design	FX5UC-32MT/DSS	~30% smaller size, suitable for limited installation space

5.3 Wichtige Anmerkungen

Softwarekompatibilität: Must use GX Works3 V1.047Z or higher; incompatible with GX Developer.
Firmware-Upgrade: Regularly update CPU firmware for latest functions and security patches.
Expansion Limit: Max 16 expansion modules connected; total I/O points ≤ 512.
Communication Setting: Default Ethernet IP: 192.168.3.3; modifiable via software or DIP switch.
Power Capacity: DC24V service power max output 400mA; additional external power required with many expansion modules.

Mitsubishi FX5U-32MT is a 16-input/16-output transistor CPU of iQ-F series. It features high-speed operation (0.065μs/step), built-in analog I/O (2AI+1AO), 4-axis 200kHz positioning and dual communication ports (Ethernet+RS485). It is widely applied to standalone control of small automated equipment, Verpackungsmaschinen, dispensing machines, usw.

Bei der Auswahl, choose the proper suffix model according to power type, terminal preference, communication and motion control requirements, and configure expansion modules reasonably to meet specific application demands.

Mitsubishi Compact PLC Model List (Full Classification)

This document sorts Mitsubishi FX series compact PLCs from latest to legacy, covering three major categories: iQ-F Series (FX5), MELSEC-F Series (FX3), and Classic Series (FX2N/FX1N/FX1S). It includes model structure, core specifications and application scenarios for easy selection and comparison.

MELSEC iQ-F Series (FX5) – New Generation High-Performance Compact PLC

1.1 Modellbenennungsregel

FX5[Serie]-[I/O-Punkte][Ausgabetyp]/[Leistung & Terminaltyp]

Segment	Bedeutung	Optionaler Code
FX5	Base series	FX5S (Standard), FX5U (High-Performance), FX5UC (Kompakt), FX5UJ (Wirtschaft)
I/O-Punkte	Total input & output points	16/24/32/40/64/80
Ausgabetyp	Ausgabemodus	M=Mixed output (Teilmodelle), R=Relay output, T=Transistor output (Sink/Source)
Leistung & Terminal	Stromversorgung & wiring type	ES=AC+Screw terminal, ESS=AC+Spring terminal, DS=DC+Screw terminal, DSS=DC+Spring terminal

1.2 Vollständige Modellliste

FX5S Series (Standard, Nicht erweiterbar)

Modell	E/A-Konfiguration	Ausgabetyp	Power/Terminal	Kernfunktionen
FX5S-16MR/ES	8IN/8OUT	Relais	AC/Screw	Grundtyp, no built-in analog
FX5S-16MT/ES	8IN/8OUT	Transistor	AC/Screw	Grundtyp, high-speed pulse output supported
FX5S-24MR/ES	12IN/12OUT	Relais	AC/Screw	2-channel built-in analog input
FX5S-24MT/ES	12IN/12OUT	Transistor	AC/Screw	2-Kanal-Analogeingang, 2-axis 100kHz pulse output
FX5S-30MR/ES	16IN/14OUT	Relais	AC/Screw	2-channel built-in analog input
FX5S-30MT/ES	16IN/14OUT	Transistor	AC/Screw	2-Kanal-Analogeingang, 2-axis 100kHz pulse output
FX5S-40MR/ES	24IN/16OUT	Relais	AC/Screw	2AI+1AO built-in analog
FX5S-40MT/ES	24IN/16OUT	Transistor	AC/Screw	2AI+1AO analog, 2-axis 100kHz pulse output

FX5U Series (High-Performance, Erweiterbar)

Modell	E/A-Konfiguration	Ausgabetyp	Power/Terminal	Kernfunktionen
FX5U-32MR/ES	16IN/16OUT	Relais	AC/Screw	2AI+1AO, 4-axis 200kHz pulse output
FX5U-32MT/ES	16IN/16OUT	Transistor	AC/Screw	2AI+1AO, 4-axis 200kHz pulse output
FX5U-64MR/ES	32IN/32OUT	Relais	AC/Screw	2AI+1AO, 4-axis 200kHz pulse output
FX5U-64MT/ES	32IN/32OUT	Transistor	AC/Screw	2AI+1AO, 4-axis 200kHz pulse output
FX5U-80MR/ES	40IN/40OUT	Relais	AC/Screw	2AI+1AO, 4-axis 200kHz pulse output
FX5U-80MT/ES	40IN/40OUT	Transistor	AC/Screw	2AI+1AO, 4-axis 200kHz pulse output
FX5U-32MR/ESS	16IN/16OUT	Relais	AC/Spring	Spring terminal, Vibrationsfestigkeit
FX5U-32MT/ESS	16IN/16OUT	Transistor	AC/Spring	Spring terminal, Vibrationsfestigkeit
FX5U-32MR/DS	16IN/16OUT	Relais	DC/Screw	DC24V power, suitable for mobile equipment
FX5U-32MT/DS	16IN/16OUT	Transistor	DC/Screw	DC24V power, suitable for mobile equipment

FX5UC Series (Kompakt, Erweiterbar)

Modell	E/A-Konfiguration	Ausgabetyp	Power/Terminal	Kernfunktionen
FX5UC-32MR/DSS	16IN/16OUT	Relais	DC/Spring	~30% smaller size, built-in Ethernet+RS485
FX5UC-32MT/DSS	16IN/16OUT	Transistor	DC/Spring	~30% smaller size, built-in Ethernet+RS485
FX5UC-64MR/DSS	32IN/32OUT	Relais	DC/Spring	~30% smaller size, built-in Ethernet+RS485
FX5UC-64MT/DSS	32IN/32OUT	Transistor	DC/Spring	~30% smaller size, built-in Ethernet+RS485

FX5UJ Series (Wirtschaft, Erweiterbar)

Modell	E/A-Konfiguration	Ausgabetyp	Power/Terminal	Kernfunktionen
FX5UJ-24MR/ES	14IN/10OUT	Relais	AC/Screw	Simplified FX5U, niedrigerer Preis
FX5UJ-24MT/ES	14IN/10OUT	Transistor	AC/Screw	Simplified FX5U, niedrigerer Preis
FX5UJ-48MR/ES	28IN/20OUT	Relais	AC/Screw	Simplified FX5U, niedrigerer Preis
FX5UJ-48MT/ES	28IN/20OUT	Transistor	AC/Screw	Simplified FX5U, niedrigerer Preis

MELSEC-F Series (FX3) – Mature & Stable Compact PLC

2.1 Modellbenennungsregel

Segment	Bedeutung	Optionaler Code
FX3	Base series	FX3S(Standard), FX3G(Erweitert), FX3U(High-Performance), FX3GC(Kompakt), FX3UC(Ultra-Compact)
I/O-Punkte	Gesamtzahl der E/A-Punkte	14/24/40/64/80/128
Ausgabetyp	Ausgabemodus	M=Mixed, R=Relay, T=Transistor
Leistungstyp	Stromversorgung	AC=AC100-240V, DC=DC24V
Sonderfunktion	Extra feature	ES=Screw terminal, ESS=Spring terminal, D=DC power, -ADP=Special adapter

2.2 Vollständige Modellliste

FX3S Series (Standard, Nicht erweiterbar)

Modell	E/A-Konfiguration	Ausgabetyp	Leistung	Kernfunktionen
FX3S-14MR/ES	8IN/6OUT	Relais	Wechselstrom	Grundtyp, no expansion capability
FX3S-14MT/ES	8IN/6OUT	Transistor	Wechselstrom	Grundtyp, no expansion capability
FX3S-24MR/ES	16IN/8OUT	Relais	Wechselstrom	2-channel built-in analog input
FX3S-24MT/ES	16IN/8OUT	Transistor	Wechselstrom	2-channel built-in analog input
FX3S-30MR/ES	16IN/14OUT	Relais	Wechselstrom	2-channel built-in analog input
FX3S-30MT/ES	16IN/14OUT	Transistor	Wechselstrom	2-channel built-in analog input

FX3G Series (Erweitert, Erweiterbar)

Modell	E/A-Konfiguration	Ausgabetyp	Leistung	Kernfunktionen
FX3G-24MR/ES	14IN/10OUT	Relais	Wechselstrom	Expandable to 128 Punkte, built-in Ethernet
FX3G-24MT/ES	14IN/10OUT	Transistor	Wechselstrom	Expandable to 128 Punkte, built-in Ethernet
FX3G-40MR/ES	24IN/16OUT	Relais	Wechselstrom	Expandable to 128 Punkte, built-in Ethernet
FX3G-40MT/ES	24IN/16OUT	Transistor	Wechselstrom	Expandable to 128 Punkte, built-in Ethernet
FX3G-60MR/ES	36EIN/24 AUS	Relais	Wechselstrom	Expandable to 128 Punkte, built-in Ethernet
FX3G-60MT/ES	36EIN/24 AUS	Transistor	Wechselstrom	Expandable to 128 Punkte, built-in Ethernet

FX3U Series (High-Performance, Erweiterbar)

Modell	E/A-Konfiguration	Ausgabetyp	Leistung	Kernfunktionen
FX3U-16MR/ES	8IN/8OUT	Relais	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-16MT/ES	8IN/8OUT	Transistor	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-32MR/ES	16IN/16OUT	Relais	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-32MT/ES	16IN/16OUT	Transistor	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-48MR/ES	24EIN/24 AUS	Relais	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-48MT/ES	24EIN/24 AUS	Transistor	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-64MR/ES	32IN/32OUT	Relais	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-64MT/ES	32IN/32OUT	Transistor	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-80MR/ES	40IN/40OUT	Relais	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-80MT/ES	40IN/40OUT	Transistor	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-128MR/ES	64IN/64OUT	Relais	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step
FX3U-128MT/ES	64IN/64OUT	Transistor	Wechselstrom	Expandable to 256 Punkte, Basic instruction 0.065μs/step

FX3GC / FX3UC Series (Kompakt, Erweiterbar)

Modell	E/A-Konfiguration	Ausgabetyp	Leistung	Kernfunktionen
FX3GC-32MR/ES	16IN/16OUT	Relais	Wechselstrom	Kompakte Größe, expandable to 128 Punkte
FX3GC-32MT/ES	16IN/16OUT	Transistor	Wechselstrom	Kompakte Größe, expandable to 128 Punkte
FX3UC-32MT-LT	16IN/16OUT	Transistor	Gleichstrom	Ultra-thin design, expandable to 256 Punkte
FX3UC-64MT-LT	32IN/32OUT	Transistor	Gleichstrom	Ultra-thin design, expandable to 256 Punkte

Classic Series (FX2N/FX1N/FX1S) – Discontinued but Widely Used

3.1 FX2N Series (High-Performance)

Modell	E/A-Konfiguration	Ausgabetyp	Leistung	Kernfunktionen
FX2N-16MR-001	8IN/8OUT	Relais	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-16MT-001	8IN/8OUT	Transistor	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-32MR-001	16IN/16OUT	Relais	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-32MT-001	16IN/16OUT	Transistor	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-48MR-001	24EIN/24 AUS	Relais	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-48MT-001	24EIN/24 AUS	Transistor	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-64MR-001	32IN/32OUT	Relais	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-64MT-001	32IN/32OUT	Transistor	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-80MR-001	40IN/40OUT	Relais	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-80MT-001	40IN/40OUT	Transistor	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-128MR-001	64IN/64OUT	Relais	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte
FX2N-128MT-001	64IN/64OUT	Transistor	Wechselstrom	Basic instruction 0.08渭s/step, expandable to 256 Punkte

3.2 FX1N Series (Standard)

Modell	E/A-Konfiguration	Ausgabetyp	Leistung	Kernfunktionen
FX1N-14MR-001	8IN/6OUT	Relais	Wechselstrom	Expandable to 128 Punkte, built-in RS485
FX1N-14MT-001	8IN/6OUT	Transistor	Wechselstrom	Expandable to 128 Punkte, built-in RS485
FX1N-24MR-001	14IN/10OUT	Relais	Wechselstrom	Expandable to 128 Punkte, built-in RS485
FX1N-24MT-001	14IN/10OUT	Transistor	Wechselstrom	Expandable to 128 Punkte, built-in RS485
FX1N-40MR-001	24IN/16OUT	Relais	Wechselstrom	Expandable to 128 Punkte, built-in RS485
FX1N-40MT-001	24IN/16OUT	Transistor	Wechselstrom	Expandable to 128 Punkte, built-in RS485
FX1N-60MR-001	36EIN/24 AUS	Relais	Wechselstrom	Expandable to 128 Punkte, built-in RS485
FX1N-60MT-001	36EIN/24 AUS	Transistor	Wechselstrom	Expandable to 128 Punkte, built-in RS485

3.3 FX1S Series (Micro Type)

Modell	E/A-Konfiguration	Ausgabetyp	Leistung	Kernfunktionen
FX1S-10MR-001	6IN/4OUT	Relais	Wechselstrom	Nicht erweiterbar, for small equipment
FX1S-10MT-001	6IN/4OUT	Transistor	Wechselstrom	Nicht erweiterbar, for small equipment
FX1S-14MR-001	8IN/6OUT	Relais	Wechselstrom	Nicht erweiterbar, for small equipment
FX1S-14MT-001	8IN/6OUT	Transistor	Wechselstrom	Nicht erweiterbar, for small equipment
FX1S-20MR-001	12IN/8OUT	Relais	Wechselstrom	Nicht erweiterbar, for small equipment
FX1S-20MT-001	12IN/8OUT	Transistor	Wechselstrom	Nicht erweiterbar, for small equipment
FX1S-30MR-001	16IN/14OUT	Relais	Wechselstrom	Nicht erweiterbar, for small equipment
FX1S-30MT-001	16IN/14OUT	Transistor	Wechselstrom	Nicht erweiterbar, for small equipment

Selection Quick Reference

Serie	Leistungsniveau	Max I/O Expansion	Integrierte Funktionen	Anwendungsszenario
FX5U	Highest	512 Punkte	Ethernet+RS485+Analog I/O+4-axis positioning	Complex standalone control, high-speed motion control
FX5S	Hoch	Nicht erweiterbar	Analog I/O+2-axis positioning	Kleine Ausrüstung, no expansion required
FX5UC	Hoch	512 Punkte	Ethernet+RS485+Analog I/O+4-axis positioning	Begrenzter Installationsraum, komplexe Steuerung
FX3U	Medium	256 Punkte	High-speed operation, multi-axis positioning	Mature applications, cost-sensitive projects
FX3G	Mittel-Niedrig	128 Punkte	Ethernet, basic positioning	Medium & small equipment, network demand
FX2N	Medium (Auslaufmodell)	256 Punkte	High-speed operation	Old equipment maintenance, spare parts replacement
FX1N	Niedrig (Auslaufmodell)	128 Punkte	Grundlegende Kommunikation	Simple control, low cost demand
FX1S	Am niedrigsten (Auslaufmodell)	Nicht erweiterbar	No expansion capability	Micro equipment, minimal control