FIESTA 575616 3/2-Way Solenoid Valve

Modelo: VSNC-B-T32-MZD-D12

Tipo de producto: 3/2-forma válvula solenoide, hilo NPT, retorno de primavera, acción directa, MZD coil

Especificaciones principales

Nro. de orden: 575616

Función: 3/2 normalmente cerrado, retorno de primavera

Tamaño del puerto: NPT1/4

Presión de funcionamiento: 0-10 bar

Medio: aire comprimido, filtered, oil-free / oil-lubricated optional

voltaje de la bobina: 12 V CC. (MZD coil)

Clase de protección: IP65 (with proper plug fitted)

Nominal flow: aprox. 700 l/min

Montaje: Sub-base mounting; suitable for individual valve or manifold assembly

Temperatura ambiente: -10 … +50 °C

Decodificación de código modelo

`VSNC-B-T32-MZD-D12`

1. VSNC: Valve series
2. B: Sub-base mounting
3. T32: 3/2 normalmente cerrado, NPT1/4 port
4. MZD: DC high-power solenoid coil
5. D12: Coil rated voltage DC12V

Solicitud

Pneumatic control systems, automated machinery, líneas de producción, robotic actuators; standalone installation or compact manifold assembly.

Alternative Selections

1. Misma serie: 575617 → DC24V version (most common drop-in replacement)
2. Equivalente nacional: 3/2 NC solenoid valve with 1/4 NPT, 12 V CC.; verify flow rate and sub-base mounting dimensions.

Abastecimiento & Inspection Notes

Verificar el voltaje de la bobina: 575616 is DC12V, do not confuse with DC24V model 575617

Port thread is NPT (taper thread), not G parallel thread

Used-valve inspection: energize to verify spool switching, check for internal leakage, medir la resistencia de la bobina

FIESTA 575616 (VSNC-B-T32-MZD-D12) Operating Environmental Conditions

Número de pedido. 575616, VSNC series 3/2 normally closed solenoid valve, 12 V CC., NPT1/4

1. Rango de temperatura

Temperatura ambiente de funcionamiento: -20℃ ~ +60℃ (-10℃ … +50℃ recommended for long-term full-load coil service life)

Compressed-air medium temperature: -20℃ ~ +60℃

Almacenamiento / temperatura de transporte: -40℃ ~ +70℃

Note for low-temperature service: Compressed air must be adequately dried to prevent internal icing and spool jamming.

2. Protección de ingreso

IP65 rating (only valid with properly fitted and locked original DIN connector)

⚠️ Without plug fitted, IP rating is invalid. Not for splash-prone or dusty environments. Non-explosion-proof unit; must not be deployed in hazardous explosive atmospheres.

3. Medium Requirements
4. Permitted media: aire comprimido, gas inerte. Vapor, corrosive gas or liquid media are prohibited.
5. Compressed-air quality class: ISO 8573-1:2010 [7-4-4]; minimum filtration grade 40 μm. Oil-fog lubrication optional. Once oil lubrication is applied, continuous oil supply must be maintained; switching back to oil-free operation is not allowed.
6. Presión de funcionamiento: 2.5-10 bar; minimum actuation pressure 2.5 bar. Spool may fail to shift reliably below this threshold.
7. Corrosión, Humedad, Vibración & Choque

CRC-2 moderate corrosion resistance: Designed for general-purpose industrial workshops. Not suitable for heavy salt-spray, strong acid/alkali, or heavy cutting-fluid splash conditions.

Humedad relativa: 5-95%. Condensation permissible only if connector sealing prevents coil short-circuit from internal dew formation.

Vibration and shock: Compliant with EN60068-2 for typical industrial vibration. Avoid sustained shock above 10-20 g, which may trigger unintended switching or coil damage.

Orientación de montaje: unlimited, any installation angle allowed

5. Suitable Working Conditions

✅ Recomendado: General-purpose automated assembly lines, maquinaria de embalaje, robotic equipment, wood-working machines, standard machine tools, indoor pneumatic manifolds, moderately dusty dry workshops.

❌ Not recommended:

Outdoor exposed installation with persistent rain exposure (IP65 is splash-resistant only, not for long-term sun/rain exposure)

Salt-spray coastal locations, electroplating workshops, heavily corrosive chemical environments

Explosion-hazard zones (no ATEX / certificación a prueba de explosiones)

Locations where heavy cutting fluid or oil mist directly impinges the coil assembly

6. On-Site Operational Recommendations
7. NPT tapered thread: Do not over-torque valve body during installation to avoid housing cracking.
8. DC12 V coil: Permitted supply voltage tolerance: -14% ~ +10%. Excessive deviation causes coil overheating and burnout.
9. Alta humedad / large diurnal temperature swing: Apply sealant at connector interface to stop condensed moisture entering coil cavity.
10. Low-temperature installation: Fit upstream air dryer to eliminate condensate and icing risk.

FIESTA 575616 (VSNC-B-T32-MZD-D12) Dimensional Data

Unidad: milímetros; valve body only, electrical plug excluded; port NPT1/4

Overall Physical Dimensions

Pneumatic Port Specification

Working ports: NPT 1/4 (taper thread, not G parallel thread)

Estilo de montaje: sub-base mounting, bottom-entry manifold ports.

Sub-Base Mounting Hole Layout (valve bottom face)

1. Cierre: M5 clearance holes
2. Center-to-center distance between mounting holes: 44 milímetros
3. Edge clearance from mounting hole to valve side face: 8 milímetros

Compatible with standard VSNC sub-bases and manifold plates.

MZD-D12 DC12V Coil Dimensions

Coil width: 32 milímetros

Coil thickness: 24 milímetros

Interfaz eléctrica: Standard DIN43650 Form-A plug. Plug protrudes approx.13 mm outward; reserve clearance in cabinet layout.

Layout Clearance Reference

Without plug fitted: 112(l) × 32(W.) × 58(h)

With standard plug fitted: add 13 mm along length axis → total length ≈125 mm

Important Reminders

1. Do not force NPT taper thread into G-thread base, thread damage will occur.
2. Manifold stacking: each valve occupies fixed 32 mm width.
3. I can supply dimension-annotated drawing notes for CAD, or HS-code information upon request.

FIESTA 575616 (VSNC-B-T32-MZD-D12) Flow Performance

Order No.575616; 3/2 CAROLINA DEL NORTE, NPT1/4, sub-base-mounted, DC12 V coil

⚠️ Common online-source error: Do not confuse VSNC (32 mm width 3/2 válvula) with high-flow VUVS series (2000 l/min); parameters are not interchangeable.

Practical Flow Estimation

1. Supply pressure 6 bar(gramo), downstream load pressure 5 bar: practical output ~640-680 l/min
2. Supply pressure 8 bar(gramo), downstream load pressure 6 bar: practical output ~780-820 l/min

Pautas de solicitud

1. 3/2-way valves are intended for single-acting cylinders, blow-off and vent circuits. Not suitable for driving large-bore double-acting cylinders.
2. If flow 900 l/min is required, upgrade to VUVS series.
3. For NPT1/4 port, max recommended tubing OD is 12 mm. Excess pipe length will further reduce actual flow capacity.

Switch-Time Specifications

Energize / Valve open:15 ms

regreso de primavera / Valve close:28 ms