contactor,cortacircuitos,inversor solar,medidor electrico,baterias solares
Parámetros principales & Guía de selección
PF083A is an 8-pin round relay socket, Diseñado originalmente por OMRON.. Es ampliamente compatible con varios relés industriales., admite montaje en carril DIN, y está equipado con conexiones de terminales de tornillo.
- Especificaciones principales
| Parámetro | Valor | Observaciones |
| Pin Quantity | 8 patas (round) | Compatible with standard 8-pin relays |
| Tipo de montaje | Carril DIN / Surface Mount | Se adapta a carril DIN estándar de 35 mm. |
| Tipo de terminal | Screw type (captive clamp) | Anti-loosening captive wire clamp design |
| Corriente nominal | 12A (IEC Standard) | Marked 10A@300VAC by partial manufacturers |
| Tensión nominal | 300VACACIONES (IEC Standard) | Insulation voltage＞5kV |
| Wire Range | 0.5-2.5mm² (AWG 20-14) | Stripping length: 6-7milímetros |
| Screw Torque | máx.. 0.8Nuevo Méjico | Prevent wiring looseness |
| Protección de ingreso | IP20 | Finger touch protection for terminals |
| Dimensiones | 41×21×52mm (Ancho×Profundidad×Alto) | Standard industrial size |
| Peso | 44gramo (Original OMRON) | Slight differences among brands |
| Material | Flame-retardant PA66+GF (Class V0) | Temperatura alta & aging resistance |
| Resistencia de aislamiento | ≥1000MΩ @ DC500V | Insulation performance between terminals |
| Withstand Voltage | AC2000V, 1 minuto | Dielectric strength test between terminals |
- Main Models & Diferencias
| Modelo | Características | Escenarios de aplicación |
| PF083A | Tipo estándar, front screw connection | control industrial general |
| PF083A-E | Finger touch protection structure | Occasions with high safety requirements |
| PF083A-D | Captive clamp screw terminals | Firm wiring and vibration resistance |
- Compatible Relay Models
The PF083A socket features high compatibility and fits the following mainstream brands and series:
- OMRON: MK2/MKS2 Series, 61Serie F, G3B Series, MKS Series
- Domestic General Models: DH48S Series, ST3PA/ST3PC/ST3PF Series
- Panasonic: AH3 Series
- Electricidad Schneider: ST3P Series
- Otros: MK2PD-I, MK2PD-S, MK2P-I, MK2PND-I, etc..
- Instalación & Pautas de operación
- Pasos de instalación
Snap-on design for direct mounting on 35mm standard DIN rail
Ensure full and firm engagement between socket and rail without looseness
Cut off power supply before wiring; connect wires according to terminal markings
- Especificaciones de cableado
Control wire stripping length within 6-7mm to avoid excessive exposed conductors
Screw torque shall not exceed 0.8Nm to prevent terminal damage
Do not use wires over 2.5mm² under rated current for optimal heat dissipation
- Recomendaciones de mantenimiento
Regularly check terminals for loose connections
Avoid long-term operation in humid and dusty environments
Disconnect power before replacing relays; pull out vertically to prevent pin bending
- Marca & Información de adquisiciones
Original Manufacturer: OMRON, Número de pieza. PF 2004D, Paquete: 50 pcs/box
Marcas alternativas: Hammerhead Industrial, Meba Electric, TENSE and more with cost-effective pricing
Gama de precios: Doméstico: CNY 10–15/pc; Original OMRON: CNY 25–30/pc
- Sugerencias de selección
- For original OMRON relays, prioritize PF083A-E or PF083A-D for optimal compatibility and safety.
- For domestic general relays, standard PF083A meets requirements with higher cost performance.
- For vibration-intensive environments, select PF083A-D with captive clamp terminals for more stable wiring.
With strong versatility, easy installation and reliable performance, the PF083A socket is a standard matching base for 8-pin relays in industrial automation, widely used in machine tool control, armarios electricos, automated production lines and other fields.
OMRON Relay Model List & Accessory Specification (PF083A Compatible Included)
- Core Relay Series List
1.1 8-Pin Round Plug-in Power Relays (PF083A Compatible)
| Serie | Ejemplo de modelo | Configuración de contacto | Corriente nominal | Voltaje de la bobina | Características clave |
| MK2/MKS2 | MK2P-I, MK2PD-S, MK2PND-I, MKS2P, MKS2PNV | 2NO+2NC (8-Alfiler) | 10A @ 250 VCA | AC110V/220V, CC 24 V, etc.. | Standard 8-pin design, PF083A compatible, indicador LED / diode optional |
| 61F | 61F-G3, 61F-GP, 61F-G | 2NO+2NC (8-Alfiler) | 10A @ 250 VCA | AC110V/220V, CC 24 V | Dedicated for liquid level controllers, fully compatible with PF083A |
| G3B/G3BD | G3B-210B, G3BD-210B | 2NO+2NC (8-Alfiler) | 10A @ 250 VCA | CC 12 V/24 V., AC24V/110V | Solid state relay, PF083A mountable, contactless design |
1.2 Miniature Power Relays (MY Series)
| Serie | Ejemplo de modelo | Configuración de contacto | Corriente nominal | Socket Model | Observaciones |
| MY2 | MY2N-J, MY2Z, MY2ZN | 2NO+2NC (8-Alfiler) | 5A @ 250 VCA | PYF08A-E, PY08 | Most commonly used miniature relay, partial replacement for MK series |
| MY3 | MY3N, MY3Z, MY3ZN | 3NO (11-Alfiler) | 5A @ 250 VCA | PYF11A, PY11 | 3-pole design for three-phase control |
| MY4 | MY4N, MY4Z, MY4ZN | 4NO (14-Alfiler) | 5A @ 250 VCA | PYF14A-E, PY14 | 4-diseño de poste, ideal for multi-circuit control |
| MYK | MY2K, MY4K | 2NO+2NC / 4NO | 5A @ 250 VCA | PYF08A-E, PYF14A-E | Tipo de enganche, power-off state retention |
1.3 Heavy-Duty Power Relays (LY Series)
| Serie | Ejemplo de modelo | Configuración de contacto | Corriente nominal | Socket Model | Solicitud |
| LY2 | LY2N-J, LY2Z, LY2ZN | 2NO+2NC (8-Alfiler) | 10A @ 250 VCA | PTF08A-E, PT08 | Main circuit control for industrial equipment |
| LY3 | LY3N, LY3Z | 3NO (11-Alfiler) | 10A @ 250 VCA | PTF11A, PT11 | Three-phase motor control |
| LY4 | LY4N, LY4Z | 4NO (14-Alfiler) | 10A @ 250 VCA | PTF14A-E, PT14 | Multi-circuit control for large equipment |
1.4 Signal Relays (G Series)
| Serie | Ejemplo de modelo | Configuración de contacto | Corriente nominal | Tipo de montaje | Características |
| G6B | G6B-1174P-US | 1NO+1NC (8-Alfiler) | 2A @ 250 VCA | tarjeta de circuito impreso / Socket Mount | Ultracompacto, bajo consumo de energía |
| G6C | G6C-1114P-US | 1NO+1NC (8-Alfiler) | 2A @ 250 VCA | tarjeta de circuito impreso / Socket Mount | Tipo de enganche, power-off retention |
| G6D | G6D-1A-ASI | 1NO (5-Alfiler) | 3A @ 250 VCA | PCB Mount | Compact high-capacity signal switching |
| G6S | G6S-2F-ASI | 2NO (8-Alfiler) | 2A @ 250 VCA | PCB Mount | High insulation, ahorro de espacio |
1.5 General-Purpose Relays (G2R Series)
| Serie | Ejemplo de modelo | Configuración de contacto | Corriente nominal | Socket Model | Observaciones |
| G2R | G2R-1-S, G2R-2-S | 1NO / 2NO (8-Alfiler) | 10A @ 250 VCA | P2RFZ-08-mi, P2RF-08 | Montaje en carril DIN, rendimiento de alto costo |
| G2RV-ST | G2RV-ST201 | 2NO+2NC (8-Alfiler) | 10A @ 250 VCA | P2RFZ-08-mi | Slim I/O relay, space efficient |
- PF083A Socket Series & Accessory Details
2.1 PF083A Core Models & Diferencias
| Modelo | Características | Tipo de montaje | Tipo de terminal | Compatible Products | Gama de precios |
| PF083A | Estándar, black housing | Carril DIN / Surface | Screw type (captive clamp) | MK2/MKS2, 61F, G3B | CNY 25–30/pc (Original) |
| PF083A-E | Finger touch protection | Carril DIN / Surface | Screw type | MK2/MKS2, 61F, G3B | CNY 28–32/pc (Original) |
| PF083A-D | Captive clamp terminals, resistente a vibraciones | Carril DIN / Surface | Reinforced screw type | MK2/MKS2 (vibration environment) | CNY 30–35/pc (Original) |
2.2 Supplementary Technical Parameters of PF083A
| Parámetro | Valor | Observaciones |
| Compatible Pin | 8 round pins (φ2.3mm) | Standard pitch: 12.7milímetros |
| Corriente nominal | 12A (CEI 61810-1) | Cumple con los estándares internacionales de seguridad. |
| Voltaje de aislamiento | ≥5000V | Withstand voltage between coil and contacts |
| Temperatura de funcionamiento | -25℃ ~ +70℃ | Industrial environmental adaptability |
| Flame Retardant Grade | UL94V0 | High safety fireproof material |
2.3 PF083A Matching Accessories
| Nombre del accesorio | Modelo | Función | Solicitud |
| DIN Rail Fastening Clip | PF-CLIP | Strengthen connection between socket and rail | Ambientes con vibraciones severas |
| Dust Cover | PF-COVER | Terminal protection against dust & humedad | Harsh installation conditions |
| Marking Strip | PF-LABEL | Terminal marking for easy maintenance | Multi-loop control systems |
| Terminal Protection Shield | PF-GUARD | Anti-contact protection, seguridad mejorada | Frequent human-machine interaction areas |
- Enchufe & Accessory Correspondence for Other Series
| Relay Series | Recommended Socket | Tipo de montaje | Tipo de terminal | Corriente nominal |
| MY Series | PYF08A-E (8-Alfiler), PYF14A-E (14-Alfiler) | Carril DIN | Screw type | 5A |
| LY Series | PTF08A-E (8-Alfiler), PTF14A-E (14-Alfiler) | Carril DIN | Screw type | 10A |
| G2R Series | P2RFZ-08-mi (8-Alfiler), P2RFZ-14-E (14-Alfiler) | Carril DIN | Screw type | 10A |
| Relé de tiempo | P7SA-14F (14-Alfiler), P7SA-08F (8-Alfiler) | Surface Mount | Screw type | 5A |
| Solid State Relay | G32A-B (8-Alfiler), G32A-C (14-Alfiler) | Carril DIN | Screw type | 10A |
- Selección & Procurement Guide
4.1 PF083A Selection Key Points
Compatibilidad: Priority for MK2/MKS2, 61F liquid level controllers and G3B solid state relays.
Seguridad: Choose PF083A-E with finger touch protection for high-safety scenarios.
Environmental Resistance: Adopt PF083A-D captive clamp terminals for vibration working conditions.
Cost Efficiency: Domestic alternatives at CNY 10–15/pc for budget projects.
4.2 Procurement Notes
OMRON Original Packaging: PF083A series, 50 pcs per box, Número de pedido. PF 2004D.
Proceso de dar un título: Select CE & UL certified products for industrial applications.
Inventory Suggestion: Reservar 10% spare parts according to project scale.
- Quick Reference Chart (PF083A Compatible Models)
| Relay Series | Compatible Model Example | Configuración de contacto | Corriente nominal | Opciones de voltaje de bobina |
| MK2 | MK2P-I, MK2PD-S, MK2PND-I | 2NO+2NC (8-Alfiler) | 10A | AC110V/220V, CC 24 V |
| MKS2 | MKS2P, MKS2PNV, MKS2PD | 2NO+2NC (8-Alfiler) | 10A | AC110V/220V, CC 24 V |
| 61F | 61F-G3, 61F-GP, 61F-G | 2NO+2NC (8-Alfiler) | 10A | AC110V/220V, CC 24 V |
| G3B | G3B-210B, G3B-2104P | 2NO+2NC (8-Alfiler) | 10A | CC 12 V/24 V., AC24V/110V |
