Schneider XPSAV11113-24VDC Safety Monitoring Relay

1. Model Segment Definition

XPSAV11113-24VDC

XPSAV: Schneider Safety Monitoring Relay Serie, dedicated to dual-channel safety circuits for emergency stop, safety door and safety light curtain.

11113: Internal contact logic and channel configuration code.

24VCC: Rated power supply 24V DC.

2. Core Basic Parameters

3. Características clave
4. Dual-channel redundant input with safety forced-guided contacts;
5. Millisecond-level safety cut-off response;
6. Only supports 24V DC power supply; AC voltage input is prohibited;
7. Built-in self-diagnosis and circuit monitoring functions.
8. Compatible Replacement Models
9. Same-brand direct replacement: Direct replacement with the same model; no upgraded alternative version
10. Doméstico / Cross-brand compatible models:

Omron G9SA-301 24VDC

Weidmüller Dual-channel Safety Relay 24VDC

Siemens 3RK3 series 24V safety module with equivalent specifications

5. Notas de aplicación

Safety signals must be connected synchronously through dual channels; single-channel connection cannot work normally;

Strictly prohibit mixed use with AC24V power supply, which will directly burn out the module;

Output contacts are only used for safety circuit control and cannot directly drive heavy loads.

Schneider Safety Monitoring Relay Series List & Comparación entre marcas

1. Overview of Core Schneider Safety Monitoring Relay Series

Schneider safety monitoring relays are centered on the Preventa XPS series, covering full-scenario safety functions such as emergency stop, safety door, safety light curtain and two-hand control. They are divided into Basic Type and Universal Type, all complying with EN/ISO 13849-1 y CEI 61508 safety standards.

2. Model Segment Coding Rules

Taking XPSAV11113-24VDC as an example, Schneider safety relay model coding follows unified logic:

3. Complete Model List of Each Series

3.1 XPSAV Series (Parada de emergencia + Solid-State Output)

3.2 XPSAF/XPSAFL Series (Standard Emergency Stop / Light Curtain Monitoring)

3.3 XPSAC Series (Basic Emergency Stop Monitoring)

3.4 XPSAR Series (Multi-contact Emergency Stop / Light Curtain Monitoring)

3.5 Universal XPSU Series (Replacement for Traditional Series)

4. Cross-Brand Comparison Table (Modelos convencionales)

5. Directrices de selección & Replacement Precautions
6. Safety Level Matching: The PL / Cat. level and SIL level of the replacement model shall not be lower than the original one.
7. Input Type Compatibility: Distinguish High/Low Level Input and PNP/NPN types; XPSAF supports dual types, while XPSAFL only supports high level.
8. Consistent Reset Mode: Divided into Automatic Reset, Monitored Reset and Manual Reset, which shall match the application scenario.
9. Tipo de terminal: Suffix P stands for plug-in terminal; no suffix for screw terminal. Pay attention to mounting compatibility during replacement.
10. Voltaje de suministro: Strictly distinguish DC24V, AC230V and Universal AC/DC to avoid module burnout.
11. Series Replacement Roadmap

Schneider is gradually replacing traditional series with the XPSU Universal Series:

XPSAR → Combined XPSUAF + XPSUEP or XPSUAT series

XPSATE/XPSATR → XPSUAT series

XPSAF/XPSAV → XPSUAF series