Siemens 3RA6120-2CB32

Explicación del código del modelo

1. Especificaciones técnicas básicas

Datos eléctricos

Tipo: SIRIUS Compact Load Feeder / Direct On-Line Starter

Tensión nominal: 690 V y, 3-fase

Tensión de control: 24 VCA/CC (50/60 Hz)

Corriente operativa nominal: 1–4 A

Motor power rating: 1.5 kilovatios en 400 V, 3 kilovatios en 690 V

Contactos auxiliares: 1 NO + 1 CAROLINA DEL NORTE

Protección: Electronic overload protection, protección contra cortocircuitos

Grado de protección: IP20

Mechanical Data

Ancho: 45 milímetros

Montaje: Estándar 35 mm montaje en carril DIN (screw and clip fixing)

Peso: Aprox.. 1.51 kilos (3.335 libra)

Tipo de conexión: Main circuit-spring-loaded terminals; Auxiliary circuit-spring-loaded terminals

III. Entorno operativo

Aplicaciones típicas

Control of small fans and pumps

Light-duty equipment such as conveyors and mixers

HVAC control in building automation systems

Auxiliary equipment control in industrial automation production lines

Replacement of conventional contactor + thermal relay combinations to save cabinet space

1. Replacement Models and Brand Comparison

Siemens Replacement in Same Series

Replacement Models from Other Brands

1. Official Ordering Information

Official order number: 3RA6120-2CB32 (globally unified)

Product status: Active product (PLM: PM300)

Minimum packaging: 1 unit/package

Certificaciones: CE, UL, CSA y otras certificaciones internacionales

1. Complete Model List for 3RA61 Series (1–4 A Range)

VII. Engineering Recommendations and Risk Warnings

Notas de instalación

1. Orientación de montaje: Vertical installation preferred; 10% derating required for horizontal installation
2. Heat dissipation space: Reserve at least 5 mm on both sides for adequate cooling
3. Especificaciones de cableado: Main circuit conductor cross-section 0.5–2.5 mm²; auxiliary circuit 0.5–1.5 mm²
4. circuito de control: Surge suppressor recommended to protect against voltage spikes

Risks in Cross-Brand Replacement

1. Ensure overload protection curve matches the motor to avoid protection failure
2. Spring-loaded and screw terminals are not directly interchangeable; rewiring and retightening required
3. Electronic overload parameters must be reset according to motor nameplate data
4. Short-circuit protection characteristics may vary between brands; short-circuit withstand rating must be verified

Puntos de mantenimiento

1. Regularly check terminal tightness, especially in vibrating environments
2. Clean dust from the device surface to maintain heat dissipation
3. Periodically test overload protection function
4. Consider voltage stabilizer if control voltage fluctuates beyond ±10%

VIII. Resumen

El Siemens 3RA6120-2CB32 es un compacto, Arrancador directo integrado con contactor combinado, Protección contra cortocircuitos y protección electrónica contra sobrecargas.. Está diseñado para pequeños motores trifásicos. (1.5 kilovatios en 400 V, 3 kilovatios en 690 V). Featuring spring-loaded terminals for quick wiring and a narrow 45 mm width to save cabinet space, its 24 V AC/DC wide-range control voltage supports various automation systems.

Typical Applications of Siemens 3RA6120-2CB32

This is a Siemens SIRIUS compact direct on-line starter with a rated current of 1–4 A, suitable for low-power three-phase motors, especially in applications requiring small motors, light loads and compact installation space.

1. Fan Applications

Small axial fans, cabinet cooling fans

Fans for air conditioning units, fresh air system fans

Small smoke exhaust fans, ventiladores de refrigeración

2. Pump Applications

Small booster pumps, circulation water pumps

Cooling water pumps, bombas de lubricación

Make-up pumps for hydraulic systems

3. Conveying and Light Industry Machinery

Small belt conveyors, transportadores de rodillos

Feeders, small elevators

Máquinas de embalaje, máquinas etiquetadoras, small conveyors

4. Machine Tools and Automation Auxiliaries

Machine tool cooling pumps, bombas de lubricación

Small chip conveyors

Drive motors for tooling and fixtures

5. Alimento, Packaging and Textile Light Industry

Small mixers and blenders

Textile small rollers, feeding mechanisms

Small drive motors for food processing

6. Building and HVAC Systems

Drive for small valve actuators

Air handling unit fans, coil fans

Small water treatment supporting equipment

7. General Industrial Auxiliaries

Pequeños fans, vibration motors

Auxiliaries for small air compressors

Auxiliary drive motors for various equipment

Suitable for all applications involving three-phase small motors up to approximately 1.5 kilovatios en 400 V with current 1–4 A, requiring direct starting, sobrecarga + protección contra cortocircuitos, and compact size with fast wiring.