Hakko MONITOUCH V810iCN-080 IHM - Contacteur,disjoncteur,capteur,Encodeur,API,Convertisseur

Wechat: +86-13184948252 WhatsApp: 0086-13811255435 E-mail: kent@bestcontactor.com

À propos Contact |

Hakko MONITOUCH V810iCN-080 IHM - Contacteur,disjoncteur,capteur,Encodeur,API,Convertisseur

API/

Hakko MONITOUCH V810iCN-080 IHM

The V8 series HMI is discontinued. It is widely used on legacy equipment (par ex., Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen. Model Code Definition V810: V8 series, 10.4-inch model i: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port) C: Standard VGA (640×480) economy version N: Tactile résistif analogique ...

  • Détails du produit

The V8 series IHM est interrompu. It is widely used on legacy equipment (par ex., Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen.

Définition du code modèle

V810: V8 series, 10.4-inch model

je: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port)

C: Standard VGA (640×480) version économique

N: Analog resistive touch panel

080: DC24V power supply variant (suffix D also stands for DC24V; AC models have no such suffix)

Spécifications matérielles de base

Afficher: 10.4″ Écran LCD couleur TFT, 640×480 VGA, 65,536 couleurs

Touch type: Tactile résistif analogique

Rétroéclairage: DIRIGÉ, rated service life approx. 70,000 heures

Mémoire: 4.5MB FROM for screen storage; 128Ko de SRAM (for recipes & alarm logs)

Protection du panneau avant: IP65 (with original waterproof gasket), face arrière IP20

Dimensions hors tout: 303.8 × 231.0 × 69.0 mm

Panel cutout size: 289.0 × 216.2 mm (+0.5/-0 tolérance)

Rear Interface List

  1. LAN RJ45: 10/100Ethernet Mbit/s
  2. MJ1, MJ2 (8-pin modular): RS232/485
  3. D-Sub9 (CN1): RS232C / RS422/485
  4. USB-A (Hôte), USB-B (Programming slave port)
  5. Emplacement pour carte CF (legacy CF card, not SD card)
  6. 24VDC power terminal block

Note: V810iCN does NOT support GU video/RGB optional modules

Logiciel & Communication

Logiciel de programmation: V-SFT-5 / V-SFT-6 (V-SFT6 supports V8, V9 and V10 series simultaneously)

8-way multi-protocol communication: Connectez-vous à 8 PLCs of different brands simultaneously (Mitsubishi, Siemens, Omron, Delta, contrôleurs de température, onduleurs, etc.)

Fonctions prises en charge: Alarmes, graphiques de tendance, recipe management, macro scripts, PLC ladder transfer, USB printing, CF card backup for screens & journaux

Options de remplacement (Discontinued Model Upgrade)

  1. Official Series Upgrade: V1010iC (10.4-pouce, identical cutout; project conversion via V-SFT automatic tool) – Top priority for direct replacement
  2. Domestic HMI Replacement: 10.4-inch local HMIs. Requires redeveloping project screens and reconfiguring communication protocols.

Rappel important: V8→V10 project conversion is irreversible. Always back up the original project before conversion.

Défauts courants & Conseils d'entretien

Typical failures: Unresponsive touch, touch offset, black screen, backlight failure, communication loss, unreadable CF card

Des pièces de rechange: Écran tactile, Rétroéclairage LED, carte d'alimentation, Carte CF, backup battery for SRAM

Maintenance note: Legacy CF cards are difficult to source. Use USB for program upload/download whenever possible.

Hakko MONITOUCH V8 Series (Hakko Electronics / Fuji Électrique) Liste complète des modèles

The entire V8 series is end-of-life (EOL).

Suffix Explanation

je: Built-in LAN Ethernet port; no i = no Ethernet port

S: High-performance model, supports GU RGB video optional modules

T: Mid-range model

C: Standard economy model (V810iCN belongs to this branch)

M.: Simplified model exclusive to V806

CH: 7.5-inch handheld type

X: 15-inch XGA high-end model

N: Tactile résistif analogique; D / 080: Alimentation DC24V

5.7-pouce | V806 Series (320×240 QVGA)

V806M / V806iM

V806C / V806iC

V806T / V806iT

Power variants: V806iCD, V806iTD, V806iMD (DC24V)

7.5-pouce | Handheld Model V808CH

V808CH / V808iCH

8.4-pouce | V808 Series (640×480 VGA)

V808C / V808iC

V808S / V808iS

Power variants: V808iCD, V808iSD (DC24V)

10.4-pouce | V810 Series (640×480 VGA, your target model here)

V810C / V810iC (Version économique; V810iCN-080 falls here; iC version cannot install GU video modules)

V810T / V810iT (Milieu de gamme, supports GU optional units)

V810S / V810iS (Haute performance, supports GU video/RGB modules)

Suffix variants: N (contact résistif), D/080 (DC24V), par ex., V810iCN, V810iTN, V810iSN

12.1-pouce | V812 Series (800×600 SVGA)

V812S / V812iS (Haute performance, supports GU video modules)

15-pouce | V815 Series (1024×768 XGA)

V815iX (V8 series flagship; Ethernet + entrée vidéo)

Function Comparison Table

Model BranchBuilt-in LAN (je)GU Video Module SupportPositionnement
V8xxC (V810iC/V808iC)Optional i❌Économie (standard for injection molding machines)
V8xxT (V810iT)Optional i✅Mid-range general purpose
V8xxS (V810iS/V812iS/V808iS)Optional i✅Haute performance
V815iX✅✅15″ XGA top model
V806MOptional i❌5.7-inch entry-level
V808CHOptional i❌7.5-inch handheld

Optional Units (For V8i models with expansion port, excluding V810iC)

GU-00/01/02/03/10/11: RGB video input units; DUN-10: V806 dedicated expansion unit

Logiciel & Remplacement

Logiciel de programmation: V-SFT5 / V-SFT6

Série de mises à niveau officielles: V10 series (V1010iC is the preferred drop-in replacement for V810iCN, same cutout size; one-click project conversion in V-SFT6)

Replacement Model List for V810iCN-080 (Hakko MONITOUCH)

Key specs of original unit: 10.4-pouce, DC24V, built-in Ethernet, catégorie économique, no video expansion port, cutout size: 289.0 × 216.2 mm

  1. Original Brand Upgrade (Premier choix: Migration du projet, No Cutout Modification)

(1) Série V10 (Current Fuji/Hakko Mainstream, Official Recommended Replacement)

V1010iC-D (Premier choix)

✅ Identical panel cutout; aucune modification de l'armoire n'est requise. V-SFT6 automatically converts V8 project files.

✅ Equipped with LAN, serial ports and USB; SD card replaces legacy CF card.

⚠️ Resolution upgraded from 640×480 to 800×600; screens auto-scale with minor control adjustments needed. Converted projects cannot be opened again on V8 software.

V1010iS-D (High-end Alternative)

Supports video input with higher performance, same cutout dimensions for future video expansion needs.

(2) Série V9 (Transitional Discontinued Model, Only Stock Available)

V9100iC (Official designated replacement for V810iC series)

Project migration via V-SFT6. Stock availability is limited; not the first choice.

(3) V8 Series Spare Replacement (Only for Used Secondhand Parts, Not for New Purchases)

V810iTN-080 / V810iSN-080

Même schéma & cutout size; extra video expansion port. The original V810iCN cannot fit GU modules, while iTN/iSN support video add-ons. Project files can be downloaded directly without modification.

  1. Domestic HMI Replacement (Project Reconfiguration Required)

Selection criteria: 289×216mm cutout, 10.4-pouce, DC24V, Ethernet + RS485/232 ports

Weintek: MT8106iP / MT8106iE (Check cutout carefully; adapter plate may be needed)

Kunlun Tongtai: TPC1061Ti (Verify cutout dimensions)

Kinco / Xinje: Most 10.4-inch high-end models require custom adapter panels or cabinet re-cutting.

Inconvénient: V-SFT project files cannot be imported directly; full re-configuration and communication debugging required.

Selection Comparison Table

Modèle de remplacementNo Cutout ModificationDirect Project MigrationVideo Module SupportÉtat de l'approvisionnement
V1010iC-D✅✅ (V-SFT6 conversion)❌Commercially available
V1010iS-D✅✅✅Commercially available
V9100iC✅✅❌Discontinué, only stock/used
V810iTN/080✅✅✅Discontinué, secondhand only
Domestic 10.4″ IHMAdapter plate may be needed❌, full re-programmingDepends on modelAbundant stock

Critical Migration Notes

  1. Back up the original V8 project file before conversion; V8→V10 conversion is irreversible.
  2. Recipes and alarm logs stored on the original CF card must be exported and imported separately after migration.
  3. Protocoles de communication (Mitsubishi MC, Siemens S7, Omron Hostlink, etc.) are fully compatible with V10; protocol parameters remain almost unchanged.
  4. Terminal pin assignments, 24V power and serial pinouts differ. Always cross-check the V10 manual before wiring.

Précédent:

Suivant:

Laisser une réponse

Laisser un message