Contacteur Schneider LC1E400

Schneider LC1E400 is a 400A high-current Contacteur CA belonging to the EasyPact TVS series. Specifically designed for industrial applications, it is used to control electric motors, équipement d'éclairage, and other high-power loads.

Paramètres de base

Duty Cycles and Applications

Main Duty Cycles:

– AC-3: Used for starting and stopping squirrel-cage motors, which is the most common industrial application.

– AC-1: Used for controlling non-inductive or slightly inductive loads, such as resistance heating equipment.

Scénarios d'application typiques:

– Motor control systems (power range: 220kW@415V to 280kW@690V)

– Control of AC loads with a power factor ≥0.95

– Industrial automation equipment

– Master switch control for lighting systems

– Other industrial applications requiring high-current switching

Caractéristiques techniques

Avantages en termes de performances:

– High making and breaking capacity: Capable of withstanding a making current of 4000A and a breaking current of 3200A (440V et)

– Courant de tenue de courte durée: 3600UN (≤40°C, 10 secondes), amélioration de la fiabilité du système

– Large plage de fonctionnement en tension: The control coil operates stably within 85%~110% of the rated voltage, does not actuate below 70%, and releases reliably within 35%~50%

– Conception à faible consommation d'énergie: Only 15VA required in the holding state, réduire la consommation d'énergie

– High anti-interference capability: Withstands 8kV impulse voltage, adapté aux environnements industriels difficiles

Caractéristiques structurelles:

– Two installation methods: base mounting or DIN rail mounting, facilitating on-site deployment

– Main circuit wiring: Can connect 2×150mm² cables or 30×5mm copper busbars, with a tightening torque of 35N·m

– Circuit de commande: Bolt-fastened terminals, capable of connecting 1~4mm² wires, with a torque of 1.2N·m

– Conception modulaire, allowing addition of accessories such as auxiliary contacts and overload protection

Explication du codage du modèle

LC1E400X7:

– LC1: Standard prefix for Schneider contactors

– E: EasyPact TVS series

– 400: Rated current of 400A

– X: Code de tension de bobine

– F: 110V CA 50/60 Hz

– M.: 220V CA 50/60 Hz

– Q: 380V CA 50/60 Hz

– N: 415V CA 50/60 Hz

– 7: Suffixe, indicating standard type (50/60Hz)

Note: The LC1E40004 series is a 4-pole version (4NON) with a rated current of 60A (AC-1), mainly used in special control circuits.

Recommandations d'application

1. -Points clés de la sélection: Choose the appropriate duty cycle based on the load type (AC-3 for motor control, AC-1 pour charges résistives)

2. Environmental Considerations: The installation location should be well-ventilated, with an ambient temperature not exceeding 55°C

3. Supporting Protection: It is recommended to use it with appropriate overload protection devices (such as thermal relays) to protect the motor and the contactor itself

4. Sélection des câbles: Pour le circuit principal, select cables with sufficient cross-sectional area (≥150mm²) pour assurer une connexion à faible impédance

5. Cycle d'entretien: Regularly inspect the contact status; a comprehensive inspection and cleaning at least once a year is recommended

Résumé

The Schneider LC1E400 is a reliable and efficient industrial-grade contactor. With its 400A high-current handling capacity and robust design, it has become an ideal choice for motor control and high-power load management in various industrial applications. For more detailed technical parameters or special application solutions, it is recommended to refer to the official Schneider Electric manual or