SICK WT160-F410 Diffuse Photoelectric Sensor

SICK WT160-F410 Diffuse Photoelectric Sensor

(Numéro de commande: 6022788)

Type de produit: Suppression d'arrière-plan diffuse Capteur photoélectrique (W160 Micro Series)

Positionnement: Taille compacte, feu rouge, with background suppression. Designed for tight installation spaces, it distinguishes targets from backgrounds and avoids interference from objects behind.

✅ Spécifications clés

Principe de détection: Diffuse reflection, Suppression d'arrière-plan (BGS)

Source de lumière: LED rouge visible, 680 longueur d'onde nm

Portée de détection: 4～60 mm (referenced to 90% white card); stable working range recommended: 8～50 mm

Alimentation: C.C 10 ~ 30 V, ripple ±10%, no-load power consumption 25 mA

Sortir: PNP, Allumé / Dark-on selectable via side DIP switch

Temps de réponse: ≤0,5 ms

Connecteur: M8 4-pin male

Logement: PBT plastic, optical window PMMA

Classe de protection: IP67

Température de fonctionnement: -25 ℃ ~ +55 ℃; Température de stockage: -40 ℃ ~ +70 ℃

Dimension: W11 mm × H23 mm × D38 mm

📌 M8 4-pin Pin Assignment

1. Brun: L+ Positive Power
2. Bleu: M 0V Reference
3. Noir: Q Signal Output
4. Blanc: NC Not Connected

📋 Scénarios d'application typiques

Machines d'emballage, film feed detection, small part counting on conveyors, détection d'étiquette, part presence detection in compact stations; scenarios with cluttered backgrounds where rear frame interference needs elimination.

⚠️ Remarks

This model is archived / abandonné (Archive). It is no longer actively promoted by the manufacturer with long lead times for procurement.

Close replacement within the same series: WT160-F420 (Numéro de commande. 6022790), same outline and sensing range with similar specifications.

Not a safety sensor; MTTFD = 2083 années, DCavg = 0. Must not be used in safety circuits.

📎 Matching Accessories

MALADE M8 straight / elbow 4-core cables (par exemple. YF2A14-020VB3XLEAX)

Câblage, Commissioning and Troubleshooting Guide (SICK WT160-F410 / 6022788)

1. Étapes de câblage
2. Brown wire (Épingle 1) to DC10~30V+, blue wire (Épingle 2) to 0V. Verify voltage before power-up. AC supply and reverse polarity are forbidden.
3. Black wire (Épingle 3) for PNP output: Output voltage approximates supply voltage when target is detected. White wire (Épingle 4) remains unconnected; do not short-circuit.
4. Commutateur DIP:

L/D: Allumé / Dark-on selection

Valeur par défaut: Allumé. Output activates when an object enters the sensing zone.

4. PLC wiring for PNP: Connect black wire to PLC input terminal; PLC common terminal to 0V.

LED Indicator Description:

LED verte: Steady ON = Power OK; Green OFF = No power or open circuit

LED jaune: Sensing indicator; Yellow ON = Target detected

Comissioning Guide (Focus on BGS Background Suppression)

2. Sensing range: 4–60 mm. Avoid mounting target closer than 4 mm (risk of false triggering). 8–50 mm is the preferred stable working zone.
3. BGS characteristic: Only detects objects within the set distance; cadres métalliques, conveyor belts and other rear backgrounds will not trigger the sensor.

✅ Commissioning verification method:

① Place target workpiece, yellow LED lights up;

② Remove workpiece, yellow LED turns off;

③ Keep workpiece in place and move background plate closer to the sensor. If yellow LED status stays unchanged, background suppression works properly.

3. Light spot: Small red spot, suitable for tiny workpieces. For highly reflective bright metal parts, increase distance appropriately to avoid saturation and false triggering.
4. Installation: Keep optical window free of oil, dust and coolant. Prevent direct strong light exposure (sunlight, high-power light sources).
5. Tableau de dépannage

4. Limites & Remarques
5. Max output current: 100 mA. Do not drive solenoid valves or high-power relays directly; utiliser des relais intermédiaires.
6. IP67: Only protected against temporary splash water. Not for permanent immersion. Extra protection required for coolant or oil mist environments.
7. Modèle abandonné: Higher risk of optical drift and unstable signal with aging. Replace with WT160-F420 once instability occurs.

General Diffuse vs BGS Background Suppression Diffuse (WT160-F410 type)

BGS versions are preferred for cluttered backgrounds prone to false triggering.

1. Conditionnement & Industrie de l'imprimerie (BGS diffuse most widely used)

Bottle, pouch and carton presence detection, position confirmation and counting on conveyors

Capuchon, label and sealing film presence check

Film feed deviation detection and missing material alarm

Workpiece trigger for printing stations and rejection of defective missing parts

Avantage: Conveyor and metal frame backgrounds do not trigger false signals. Ideal for compact stations such as WT160 series.

2. Électronique, Semi-conducteur & 3C Assembly

Position confirmation of PCB boards, connecteurs et petites pièces en plastique

Gripper object detection for robotic handling

Material presence check for cells, modules and carriers

Workpiece trigger for labeling, screw locking and dispensing stations

Small terminal and component incoming detection (small red spot models)

3. Logistique, Entreposage & Sorting Lines

Parcel passing detection, counting and diversion trigger

Bin / pallet presence detection at rack locations

Low obstacle detection for AGVs and positioning of material frames

Trigger assist for barcode scanning in parcel sorting

4. Nourriture & Industrie des boissons

Bottle and carton presence detection and counting on production lines

Bin / hopper level monitoring (full / vide)

Workpiece position detection for aseptic packaging; stainless steel IP67 / IP69K hygienic versions recommended

Note: Ordinary diffuse sensors struggle with transparent bottles and films. BGS or laser types are preferred.

5. Composants automobiles, Machines-outils & Automatisation personnalisée

Workpiece in-position and discharge detection for stamping and machining stations

Part placement verification on fixtures

Blockage and missing material alarm for material chutes

Auxiliary detection (not a replacement for safety light curtains)

6. Matériel de bureau & Industrie légère

Paper detection for printers and copiers

Portes automatiques, sensor taps, hand dryers and smart bins

Auxiliary anti-pinch detection for elevator doors

✅ Selection Guide for Drawing

1. Standard diffuse (without BGS) – Suitable for single, distant clean backgrounds. Faible coût. Strongly affected by target color and reflectivity; black targets may fail detection.
2. BGS Background Suppression Diffuse (WT160-F410) – Triangulation principle. Only detects objects within the target distance and shields rear frames, conveyors and metal backgrounds. Suitable for short-range, cluttered background applications where workpieces sit close to conveyors; widely used in custom automation.

❌ Unsuitable Applications

Long-distance detection (>1 m; through-beam or retro-reflective preferred)

Highly transparent objects (transparent films, bouteilles en verre; unstable for standard diffuse sensors)

Mirror-like highly reflective workpieces (easy saturation and false trigger)

Direct strong sunlight, heavy dust or heavy coolant splash without shielding

Safety protection circuits (not safety-rated sensors)

SICK Diffuse Photoelectric Sensor List (WT / GTB Series)

1. Naming Prefix Rules
2. WT = Diffuse reflection

WTB: With BGS Background Suppression (le plus courant, WT160 belongs to this category)

WTF: Foreground suppression / focused spot

WTM: Standard energy-type diffuse (without background suppression)

2. GTB: Ultra-compact miniature series, Connecteur M8
3. Signification du suffixe: E = Standard diffuse; F = Background suppression; P = PNP; N = NPN; L = Laser source
4. Aperçu de la série (Sorted by Housing Size, including WT160)

(1) Ultra-compact G Series (Connecteur M8, tight space preferred)

G2S (Smallest form factor, 7.7×21.8 mm)

WTB2S-2P3130 (BGS equivalent to 6022788)

WTB2S-2P1030S13, WTB2S-2F1430

GTB2S-P1311, GTB2S-F1311 (3-pin M8, range 1~36 mm)

G6 (Square miniature, 12×31.5 mm)

GTB6-P4211, GTB6L-F6211 (Laser BGS, 30~400 mm)

(2) W2 Ultra-thin Mini Series (WTB2S thin housing)

WTB2S-2N1130 (1063321)

WTB2S-2P3130 (1064575), BGS, maximum 36 mm

(3) WT160 Micro Series (Votre modèle cible, W160, M8 4 broches, archived discontinued)

Modèle + Numéro de commande. list

1. WT160-F410 | 6022788 (your part), 4~60 mm, PNP, BGS
2. WT160-F420 | 6022790 (remplacement direct)
3. WT160-E112 | 6022775 (standard diffuse)
4. WT160-E410 | 6022780
5. WT160-F122 | 6022785
6. WT160-F470 | 6022820 (long-range version)

(4) W9 Small Square (M8/M12, laser optional)

WTB9-3N2461 (1049053)

WTB9L-3P2291 (Laser BGS, 25~400 mm)

(5) W100 General Economy Series (Rentable)

WT100-P1432 (6026075, PNP diffuse)

WT100-N1419 (Sortie NPN)

(6) W12 Metal Body Universal Series (Industrial mainstream, IO-Link available, DIRIGÉ / laser optional)

Préfixe: WTB12 (BGS), WTM12 (standard diffuse), WTF12 (focused spot)

1. WTB12-3P2441S50 (1044106, red light BGS)
2. WTB12L-24161A20A00 (1126340, laser version, maximum 1.2 m)
3. WTF12L-34162120A00 (focused spot, for small holes and thin targets)

(7) W16 Mid-size (Successor for WT160, IO-Link)

WTB16P-24161120A00 (1218626, M12, BGS 10~1000 mm)

WTB16I-24161120A00 (infrared, high ambient light resistance)

(8) W23 / W24 Medium-Long Range (100~1200 mm)

1. W23: WT23-2P2441 (1027779, BGS, 800 mm)
2. W24: WT24-2B240 (1017813, 100~1200 mm, réglage du potentiomètre)

(9) W26 Long-range Premium Series (Jusqu'à 2 m, IO-Link, widely used in packaging lines)

WTB26I-24161420A00 (1222711, BGS, 180~2000 mm)

3. Quick Selection by Function

1) Suppression d'arrière-plan BGS (WTB / GTB, eliminate frame false triggers, 90% automation preference)

Short range (≤60 mm, match WT160-F410): WT160-F410, WTB2S, GTB6

Medium range (50~500 mm): WTB9, WTB12, WTB16

Longue portée (500~2000 mm): WT24, WTB26

2) Standard Energy Diffuse (WTM, pas de suppression d'arrière-plan; background must be far away)

WTM12, WT100, WTE23, for clean, distant single-background conveyors

3) Laser Versions (Tiny spot, ultra-small workpiece detection)

Suffix with L: WTB12L, WTB9L, GTB6L, spot ≤0.2 mm, for fine pins and terminals

4. Replacement Options for WT160-F410 (6022788)
5. Original same-series: WT160-F420 (6022790) – same housing, pinout and sensing range, remplacement immédiat préféré
6. Nouvelle série améliorée: WTB16P (W16 series, IO-Link, Connecteur M12)
7. Domestic miniature alternatives: Match dimension, PNP, BGS, M8 4 broches
8. Common Pinout Rule for WT160 / WTB Series

M8 4-pin male:

Pin1 Brown: DC+ 10~30V

Pin2 Blue: 0V

Pin3 Black: Q Output (PNP/NPN)

Pin4 White: Caroline du Nord