Vanne à soupape à bride Siemens VVF53.25

Siemens ACVATIX™ long-stroke 2-way flanged globe valve, Diamètre nominal DN25, Pression nominale PN25. Convient à la plage de température du support -20 ~ 220°C. Adapté aux actionneurs des séries SAX/SKD/SKB/SKC. Appliqué au contrôle des fluides tels que la vapeur, eau chaude et huile thermique. Modèle typique: VVF53.25-10 (Kvs=10m³/h). Les numéros de commande commencent par S55208.

1. Définition du segment du modèle

2. Full Version Core Specification Table

3. Liste des modèles de la série complète (VVF53 2-Way Flanged Globe Valve)

4. Concurrent / Obsolete Model Replacement List

4.1 Same Brand Alternative Models (Directly Compatible)

4.2 Modèles équivalents multimarques

5. Environnement d'application & Cas industriels

Scénarios d'application recommandés (★★★★★)

HVAC System: Temperature control for central air conditioning water systems in commercial buildings, hôtels et hôpitaux

Industrial Steam System: Steam heating and humidification control in textile, food and pharmaceutical industries

Chauffage urbain: Secondary side temperature regulation for urban heating pipe networks

Refrigeration System: Flow control for chillers and cooling towers

Industrial Fluid Control: Regulation of process fluids (eau chaude, thermal oil, condensate) in chemical and power industries

Renewable Energy: Heat exchange control for solar energy and ground source heat pump systems

Cas d'application typiques

1. Steam Sterilization System in Food Processing Plant

Application Target: Precisely control steam flow to keep sterilization temperature stable at 121°C

Avantage de base: Equal percentage flow characteristic adapts to wide range flow regulation; PN25 rating withstands steam pressure fluctuation

System Configuration: VVF53.25-10 + SKD62 electro-hydraulic actuator + S7-1200 PLC control

Effet de l'opération: Temperature control accuracy ±0.5°C, sterilization efficiency +20%, energy consumption -15%

2. Central Air Conditioning System of Commercial Complex

Application Target: Regulate chilled water flow to realize independent temperature control in different zones

Avantage de base: Compatible with SAX61.03 electric actuator with fast response; flanged design for easy installation and maintenance

System Configuration: VVF53.25-8 + SAX61.03 actuator + room thermostat + building management system

Effet de l'opération: Room temperature accuracy ±1°C, improved comfort, system energy consumption -18%

Scénarios non recommandés (★☆☆☆☆)

High differential pressure＞16bar: Adopt VVF53K high differential pressure version

Strongly corrosive media such as strong acid and alkali: Select special alloy valves

Temperature over 220°C or below -20°C: Beyond nominal range, sealing performance declines

Media containing solid particles: Easy seat wear and increased leakage

Vacuum system: Sans objet; dedicated vacuum valve required

6. Installation & Directives de câblage (Engineering Essential)

Installation Regulations

1. Sens de montage: Vertical installation with actuator upward; horizontal installation must keep actuator shaft horizontal
2. Flow Direction: Install strictly according to valve body arrow; reverse installation not allowed
3. Pipeline Preparation: Flush pipelines thoroughly before installation; 100μm filter is recommended
4. Flange Connection: Use ISO 7005 standard flanges; fasten bolts evenly to avoid valve body deformation
5. Isolation: Insulate valve body for high temperature media to reduce heat loss and prevent scalding
6. Espace d'entretien: Reserve ≥200mm clearance around valve for actuator disassembly and servicing

Actuator Wiring Diagram (SAX61.03 Example)

1 2 3 4 5 6 7 8

┌─────────────────────┐

│ │

│ SAX61.03 Actuator │

│ │

└─────────────────────┘

Points clés de la mise en service

1. Stroke Calibration: Perform automatic stroke calibration after power-on to ensure full open / full closed position accuracy
2. Flow Test: Verify linear relationship between control signal and flow via PLC output
3. Leakage Inspection: Check closed valve leakage complies with Class IV standard
4. Temps de réponse: Test full travel response time to meet system control requirements
5. Alarm Configuration: Set actuator fault alarms (over torque, power failure) for system monitoring
6. Mnémonique de sélection & Règles rapides

Mnémonique de sélection

Siemens 2-way VVF53,

DN25 size PN25 rated,

Long-stroke high precision guaranteed,

Equal percentage flow graded,

Fit steam and hot water shaded,

-20 to 220°C ranged,

Kvs 6.3/8/10 selected,

SAX/SKD actuators matched,

K version for high pressure dated,

JC for corrosion related,

Order by S55208 validated,

Flanged mounting firmly stated.

Règles de sélection rapide

1. Diameter Matching: Choose DN15~DN250 by pipe size; DN25 corresponds to VVF53.25
2. Kvs Calculation: Calculate required Kvs via formula \(Kvs=Q\times\sqrt{\Delta P/\rho}\) according to system flow and differential pressure
3. Pressure Rating: Standard for regular conditions, -K version for high differential pressure
4. Media Temperature: Standard range -20~220°C; customized for over-limit temperature
5. Actuator Selection: SAX electric for small torque; SKD/SKB/SKC electro-hydraulic for large torque
6. Special Conditions: Select -JC stainless steel internal parts for corrosive media
7. Conformité du fret aérien & Informations sur les certifications (International Trade)

Conformité du fret aérien: Pas de batterie au lithium / super capacitor. Valve body metal construction, électrique / electro-hydraulic actuator. Conforme à la classe IATA DGR 9 marchandises non restreintes, shippable as general cargo.

Certifications:

CE: Conforme à la norme EN 12516-1, DANS 60730

UL: Conforme à UL 1995 industrial control standard

ASC: Canadian electrical safety approval

ATEX: Suitable for potentially explosive atmosphere (actuator certified separately)

OIN 9001: Quality management system certification

Certification environnementale: Conforme RoHS, free of lead, mercury, cadmium; meets REACH regulations.

9. Achat & Inventory Information