Core Parameter Review (Matching Benchmark for Replacement)
| Articolo | Benchmark Value | Key Matching Requirements |
| Potenza nominale | 2.4kW/2.5kW | Must be equal or slightly higher (≤10%) |
| Coppia nominale | 5.8Nm | Core matching parameter, tolerance ≤5% |
| Velocità nominale | 4,000giri/min (massimo. 6,000giri/min) | At least meet rated speed |
| Tipo di codificatore | Assoluto (1ZZ9) | Must be absolute; EnDat 2.2 raccomandato |
| Tipo di albero | Involute spline shaft | KUKA robot‑specific, deve corrispondere |
| Classe di protezione | IP65 | minimo. IP65; IP67 for harsh environments |
| Compatible System | KUKA robots (KRC4/KRC5) | Must be compatible with KSD series drives |
| Massimo. Coppia | 18.9Nm (3.26x overload) | At least 3x overload capacity |
- Main Brand Replacement Models (By Brand)
- Yaskawa Replacement Solutions
| Yaskawa Model | Parametri di corrispondenza chiave | Note applicative | KUKA Compatibility |
| SGMGH-09ACA61-K | 2.5kW, 5.9Nm, 4000giri/min, absolute encoder, spline shaft | Custom for KUKA robots, pienamente compatibile | ★★★★★ (Best Replacement) |
| SGMGH-09ACA61 | 2.5kW, 5.9Nm, 4000giri/min, absolute encoder | Versione standard; spline shaft modification required | ★★★☆☆ (Mechanical modification needed) |
| SGMAS-08ACA41-K | 2.4kW, 5.7Nm, 4000giri/min, absolute encoder | Compact custom version for small KUKA robots | ★★★★☆ (For KR AGILUS series) |
- Mitsubishi Replacement Solutions
| Mitsubishi Model | Parametri di corrispondenza chiave | Note applicative | KUKA Compatibility |
| HF-SP102-K | 2.5kW, 5.8Nm, 4000giri/min, absolute encoder, spline shaft | Custom for KUKA, perfect parameter match | ★★★★★ (Best Replacement) |
| HF-SP102 | 2.5kW, 5.8Nm, 4000giri/min, absolute encoder | Versione standard; custom spline shaft required | ★★★☆☆ (Mechanical modification needed) |
| HF-KP13-K | 2.4kW, 5.7Nm, 4000giri/min, absolute encoder | Low inertia, for high‑speed KUKA joints | ★★★★☆ (For KR CYBERTECH nano) |
- ABB Replacement Solutions
| Modello ABB | Parametri di corrispondenza chiave | Note applicative | KUKA Compatibility |
| MPM0920-K | 2.5kW, 5.8Nm, 4000giri/min, absolute encoder, spline shaft | Custom for robots, compatible with KUKA controls | ★★★★☆ (Parameter adaptation required) |
| MPM0920 | 2.5kW, 5.8Nm, 4000giri/min, absolute encoder | Versione standard; lancia & protocol adaptation needed | ★★★☆☆ (Medium modification difficulty) |
| MPM0810-K | 2.4kW, 5.7Nm, 4000giri/min, absolute encoder | Compatto, for light‑load KUKA robots | ★★★★☆ (For KR 6 serie) |
- Schneider Replacement Solutions
| Modello Schneider | Parametri di corrispondenza chiave | Note applicative | KUKA Compatibility |
| BCH1003N12A1C-K | 2.5kW, 5.8Nm, 4000giri/min, absolute encoder, spline shaft | Custom for KUKA, IP65 protection | ★★★★★ (Best Replacement) |
| BCH1003N12A1C | 2.5kW, 5.8Nm, 4000giri/min, absolute encoder | Versione standard; spline shaft modification required | ★★★☆☆ (Mechanical modification needed) |
| BCH0803N12A1C-K | 2.4kW, 5.7Nm, 4000giri/min, absolute encoder | Compatto, for small KUKA joints | ★★★★☆ (For KR AGILUS axes 2–4) |
- Altre sostituzioni di marca
| Marca | Modello | Parametri chiave | Note applicative |
| FANUC | A06B-0227-B400-K | 2.5kW, 5.8Nm, 4000giri/min | Protocol conversion module required for KUKA |
| Kollmorgen | AKM2G-21V-ANCN-00 | 2.5kW, 5.9Nm, 4000giri/min | Custom spline shaft + KUKA interface required |
| Panasonic | MHMF202L1G6M-K | 2.5kW, 5.8Nm, 4000giri/min | Compatible with KUKA; parameter tuning required |
- Replacement Selection Matrix (By Application)
| Applicazione | Marchio consigliato | Top Model | Vantaggio |
| Direct replacement for KUKA | Yaskawa / Mitsubishi | SGMGH-09ACA61‑K / HF‑SP102‑K | Full compatibility, no mechanical/electrical changes |
| Cost‑optimized replacement | Schneider / Panasonic | BCH1003N12A1C‑K / MHMF202L1G6M‑K | Elevato rapporto costo-prestazioni, near‑original performance |
| Small robots (KR AGILUS) | Yaskawa / Mitsubishi | SGMAS‑08ACA41‑K / HF‑KP13‑K | Perfect size, better dynamic response |
| Heavy payload (KR 20–30kg) | ABB / Kollmorgen | MPM0920‑K / AKM2G‑21V‑ANCN‑00 | Higher overload, better stability |
| Ambiente duro (dust/moisture) | Schneider / Yaskawa | BCH1003N12A1C‑K / SGMGH‑09ACA61‑K | IP65, suitable for tough conditions |
- Critical Implementation Notes (Deve leggere)
- Mechanical Matching
Shaft type: Must be involute spline shaft (KUKA standard); keyed shafts require adapters.
Dimensioni di montaggio: Match 1FK7081 flange and hole pattern; 3D comparison recommended.
Moment of inertia: Tolerance ≤15% vs original (24 kg·cm²) to avoid performance issues.
- Electrical Matching
| Electrical Item | Matching Requirement | Risk of Mismatch |
| Encoder protocol | Must support EnDat 2.2 (KUKA compatible) | No position feedback; requires converter |
| Motor winding | Suitable for 560V DC bus voltage | Motor/drive burnout |
| Feedback connector | Match KUKA standard (25‑pin) | Custom cable needed, higher failure risk |
| Brake system | Holding torque ≥11Nm, CC 24 V | Cannot hold position when powered off |
- Software Configuration
- Update motor parameters in KUKA controller (torque constant, inertia, encoder type, ecc.)
- Recalibrate robot zero and dynamic parameters
- Perform load identification and trajectory optimization
- Test full travel and overload performance to validate replacement
- Siemens Original Replacements (Best Compatibility)
- Series Upgrade Options
| Modello Siemens | Parametri chiave | Note applicative | KUKA Spare Part No. |
| 1FK7081-2AC71-1UA0 | 3.7kW, 12Nm, 3000giri/min | Standard replacement; è necessaria la regolazione dei parametri | No direct match, custom only |
| 1FK7101-5AZ91-1ZZ9-Z S07 | 3.5kW, 8.5Nm, 4000giri/min | Higher power for heavier loads | 00-117-606 |
| 1FK7081-2AF71-1RB0 | 3.7kW, 12Nm, 4500giri/min | High‑speed for high‑cycle applications | No direct match |
- Replacement Priority
- Genuine KUKA spare part (00-115-925): Best compatibility, for critical equipment
- Yaskawa/Mitsubishi KUKA custom versions: Near-original, no modification, moderate cost
- Other brand custom versions: Cost advantage, requires professional support
- Standard model modification: Costo più basso, full mechanical/electrical/software changes, high risk
- Implementation Steps (For Success)
- Parameter verification: Confirm all original motor specs and create a matching sheet
- Model selection: Choose brand/model based on budget and application
- Test del campione: Install and test 1 unit to verify mechanical/electrical/software compatibility
- Sostituzione del lotto: Implement one by one after validation
- Documentation update: Record replacement model and parameters in equipment files
1FK7081-5AZ91-1ZZ9-Z is a KUKA custom motor. Always use KUKA-approved replacements to avoid performance loss or safety hazards. Full functional and safety testing is strongly recommended after replacement.
Contattore,interruttore automatico,inverter solare,contatore elettrico,batterie solari
