Contattore,interruttore automatico,inverter solare,contatore elettrico,batterie solari
Scomposizione del codice modello
LC1D65008M7 is an AC contactor from Schneider Electric’s TeSys D series, with each segment defined as follows:
- LC1D: 3contattore CA a polo, Schneider TeSys D series
- 65: Rated operational current 65A under AC3 duty
- 008: Auxiliary contact configuration → 2 NO + 2 NC
- M7: Coil control voltage → 220V AC, 50/60Hz
- Specifiche tecniche principali
Marca: Schneider Electric
Serie: TeSys D
Poli principali: 3 poli
Corrente nominale: 65UN (AC3, 380V)
Contatti ausiliari: 2 NO + 2 NC
Tensione della bobina: 220V CA 50/60 Hz
Montaggio: Montaggio su guida DIN / montaggio a vite
Grado di protezione: IP20 (anteriore)
III. Applicazioni
Direct starting and reversing control of threephase asynchronous motors
Industrial loads such as distribution circuits, tifosi, pompe, e compressori
General AC load switching control in control cabinets
- Modelli sostitutivi
SameBrand Replacements
LC1D65008 is the same specification and can be replaced as needed with different coil voltages only. Versione standard: LC1D65AM7 (1 NO + 1 NC)
Chinese Domestic Brand Replacements
CINT: NXC65 220V 2NO2NC
DELIXI: CDC6i65 220V 2NO2NC
Complete List of Schneider TeSys D Series (LC1D) AC Contactors
- Convenzione di denominazione dei modelli
LC1D[Corrente nominale][Contatti ausiliari][Tensione della bobina][Suffisso]
| Campo | Senso | Esempi |
| LC1D | 3-contattore CA a polo, Serie TeSys D | LC1D |
| Corrente nominale | Rated operational current under AC-3 duty | 09(9UN), 12(12UN), 18(18UN), 25(25UN), 32(32UN), 38(38UN), 40(40UN), 50(50UN), 65(65UN), 80(80UN), 95(95UN), 115(115UN), 150(150UN), 170(170UN) |
| Contatti ausiliari | Built-in auxiliary contact configuration | 00(none), 10(1 NO), 01(1 NC), 20(2 NO), 02(2 NC), 22(2 NA+2NC), 008(2 NA+2NC, modelli speciali) |
| Tensione della bobina | Control coil voltage code | B(24VCA), CC(36VCA), E(48VCA), F(110VCA), FE(115VCA), l(208VCA), M(220VCA), P(230VCA), Q(380VCA), V(400VCA), U(240VCA), CD(36VCC), ED(48VCC), ND(60VCC), SD(72VCC) |
| Frequency/Origin | 7(50/60Hz), C(Made in China) | 7C(50/60Hz, Made in China) |
- Elenco completo dei modelli
- Standard Rated Current Series (9A~170A)
| Corrente nominale | Modello base | Common Complete Model Examples |
| 9UN | LC1D09 | LC1D09B7C, LC1D09F7C, LC1D09M7C, LC1D09Q7C, LC1D09CD(36VCC) |
| 12UN | LC1D12 | LC1D12B7C, LC1D12M7C, LC1D12Q7C, LC1D12ED(48VCC) |
| 15UN | LC1D15 | LC1D15F7C, LC1D15M7C, LC1D15V7C(400VCA) |
| 18UN | LC1D18 | LC1D18B7C, LC1D18M7C, LC1D18ND(60VCC), LC1D18SD(72VCC) |
| 25UN | LC1D25 | LC1D25B7C, LC1D25F7C, LC1D25M7C, LC1D25CC7C(36VCA) |
| 32UN | LC1D32 | LC1D32B7C, LC1D32M7C, LC1D32Q7C, LC1D32FE7C(115VCA) |
| 38UN | LC1D38 | LC1D38B7C, LC1D38M7C, LC1D38V7C(400VCA) |
| 40UN | LC1D40 | LC1D40B7C, LC1D40M7C, LC1D40ED(48VCC) |
| 50UN | LC1D50 | LC1D50B7C, LC1D50F7C, LC1D50M7C, LC1D50ND(60VCC) |
| 65UN | LC1D65 | LC1D65008M7(2NO+2NC), LC1D65A(1NA+1NC)M7C, LC1D65Q7C |
| 80UN | LC1D80 | LC1D80B7C, LC1D80M7C, LC1D80V7C(400VCA) |
| 95UN | LC1D95 | LC1D95B7C, LC1D95M7C, LC1D95FE7C(115VCA) |
| 115UN | LC1D115 | LC1D115F7C, LC1D115M7C, LC1D115Q7C |
| 150UN | LC1D150 | LC1D150FE7C(115VCA), LC1D150M7C, LC1D150V7C(400VCA) |
| 170UN | LC1D170 | LC1D170M7C, LC1D170Q7C, LC1D170V7C(400VCA) |
- Auxiliary Contact Configuration Options
| A. Contact Code | Configurazione dei contatti | Gamma di applicazione |
| 0 | No built-in auxiliary contacts | Serie completa |
| 10 | 1 NO | Serie completa |
| 1 | 1 NC | Serie completa |
| 20 | 2 NO | Serie completa |
| 2 | 2 NC | Serie completa |
| 22 | 2 NO + 2 NC | Serie completa |
| 8 | 2 NO + 2 NC | Mainly for LC1D65, LC1D80, LC1D95, ecc. |
| 10 | 1 NO | Specific models |
| 20 | 2 NO | Specific models |
- Complete Coil Voltage Reference Table
| Tipo di bobina | Codice tensione | Corresponding Voltage | Esempio di modello completo |
| Bobina CA | B7 | 24V CA 50/60 Hz | LC1D09B7C |
| Bobina CA | CC7 | 36V CA 50/60 Hz | LC1D25CC7C |
| Bobina CA | E7 | 48V CA 50/60 Hz | LC1D38E7C |
| Bobina CA | F7 | 110V CA 50/60 Hz | LC1D09F7C |
| Bobina CA | FE7 | 115V CA 50/60 Hz | LC1D150FE7C |
| Bobina CA | L7 | 208V CA 50/60 Hz | LC1D09L7C |
| Bobina CA | M7 | 220V CA 50/60 Hz | LC1D65008M7, LC1D09M7C |
| Bobina CA | P7 | 230V CA 50/60 Hz | LC1D09P7C |
| Bobina CA | D7 | 380V CA 50/60 Hz | LC1D12Q7C |
| Bobina CA | V7 | 400V CA 50/60 Hz | LC1D15V7C |
| Bobina CA | U7 | 240V CA 50/60 Hz | LC1D09U7C |
| Bobina CC | CD | 36A DC | LC1D09CD |
| Bobina CC | ED | 48A DC | LC1D12ED |
| Bobina CC | ND | 60A DC | LC1D18ND |
| Bobina CC | SD | 72A DC | LC1D18SD |
- Special Model Series
| Model Type | Caratteristiche | Example Models |
| Reversing Contactors | For motor forward/reverse control | LC2D09M7C, LC2D32Q7C |
| 4-Contattori polari | 2 NO + 2 NC main poles | LC1D188M7C(4P 2NO+2NC) |
| Capacitor Contactors | Dedicated for capacitor switching | LC1DFKP7(12.5kVAR) |
| Special Aux. Contatti | Integrato 4 contatti (2NO+2NC) | LC1D65008M7, LC1D80008M7 |
III. General Technical Specifications
| Articolo | Specifica |
| Numero di poli | Standard 3 poli (3 NO), opzionale 4 poli (2 NA+2NC) |
| Tensione di isolamento nominale | 690V e |
| Tensione operativa nominale | Up to 440V AC (Servizio AC-3) |
| Montaggio | Montaggio su guida DIN / montaggio a vite |
| Grado di protezione | IP20 (anteriore, finger-safe) |
| Auxiliary contact rated current | 5A AC-1 240V |
| Resistenza meccanica | ca. 10 milioni di operazioni |
| Resistenza elettrica | ca. 1 million operations under AC-3 duty |
- Raccomandazioni per la selezione
- Select by load current: Choose a contactor with rated current ≥ load current under AC3 duty according to the rated current of the motor or load.
- Configurazione contatti ausiliari: Select the appropriate NO/NC combination based on control circuit requirements; expandable via LADN series auxiliary contact modules if needed.
- Coil voltage matching: Ensure coil voltage matches the control circuit supply voltage to avoid coil burnout.
- Special applications: Use dedicated models for special applications such as capacitor switching and motor reversing control.
