Contattore,interruttore automatico,inverter solare,contatore elettrico,batterie solari
Definition of each part of LC1F1250MD:
| Segmento | Descrizione |
| LC | Product category code, stands for Schneider Contactor product line |
| 1 | Standard single contactor (2 = reversing contactor) |
| F | Codice della serie, stands for TeSys F Series (heavy-duty industrial contactor) |
| 1250 | Rated current specification: 1250UN (actual 1260A under AC-1 @ 440V) |
| M | Codice tensione bobina: 220V (AC or DC distinguished by the following letter) |
| D | Coil type code: Bobina CC (M7 = AC coil; MD = DC coil) |
Differenza fondamentale:
LC1F1250MD is fitted with 220VDC coil, while LC1F1250M7 is 220VAC coil. Both share identical main circuit parameters; only the control circuit power supply type differs.
- Specifiche tecniche principali
| Categoria | Parametri |
| Basic Characteristics | • Product Series: TeSys F heavy-duty industrial contactor |
| • Poli: 3P (3 poli) | |
| • Main Contacts: 3NO (3 Normalmente aperto) | |
| • Utilization Category: AC-1 (non-inductive / slightly inductive loads such as resistance furnaces) | |
| • Mounting: Guida DIN standard da 35 mm / bolt mounting | |
| Main Circuit Ratings | • Rated Operational Voltage (Ue): ≤690 V CA (50/60Hz) / ≤460V DC |
| • Rated Insulation Voltage (Ui): 1000V e | |
| • Rated Operational Current (Cioè): 1260UN (AC-1, 440V, 40°C) | |
| • Conventional Thermal Current (Ith): 1260UN | |
| • Short-time Withstand Current (Icw): 25IL / 1s @ 400V | |
| • Contact Resistance: ≤0.12mΩ | |
| Control Circuit Ratings | • Coil Type: Bobina CC |
| • Rated Coil Voltage (Uc): 220VCC (compatible with 230VDC in practice) | |
| • Coil Power Consumption: Pull-in 140W, Holding 24W | |
| • Pull-in Time: ≤80ms | |
| • Drop-out Time: ≤50ms | |
| • Control Terminals: Screw clamp type | |
| Meccanico & Ambientale | • Mechanical Life: 1,000,000 operazioni |
| • Electrical Life (AC-1): 100,000 operazioni | |
| • Max Operating Frequency: 300 cycles/hour | |
| • Operating Temperature: -5~+40°C (derating required +40~+60°C) | |
| • Storage Temperature: -25~+60°C | |
| • Protection Class: IP20 (after installation) | |
| • Dimensioni (L×A×P): 309×280×181mm | |
| • Peso: ca. 18kg | |
| Certificazioni & Standard | • Compliance: CEI 60947-4-1, IN 60947-4-1, GB 14048.4 |
| • Approvals: CE, UL, CSA, CCC, UKCA | |
| • Eco Certification: Premio verde (RoHS / REACh compliant) |
- Elenco degli accessori
3.1 Accessori standard
Contactor main unit LC1F1250MD ×1
Mounting fasteners (DIN rail clip / bulloni) ×1
Operation Manual (electronic version) ×1
Coil surge suppressor (opzionale, separate order required)
3.2 Accessori opzionali (Sold Separately)
| Tipo di accessorio | Esempio di modello | Scopo |
| Auxiliary Contact Block | LAD9F01 / LAD9F10 | Add 1NO / 1NC auxiliary contacts for control circuit expansion |
| Mechanical Interlock Block | LA9FF976 | For reversing circuit (avanti/indietro), prevents simultaneous closing of two contactors |
| Terminal Protection Cover | LAD9V6 | Safety protection for main circuit terminals, prevenzione delle scosse elettriche |
| Power Connection Busbar | LAD9B1250 | High-current main circuit wiring, simplifies installation |
| Soppressore di sovratensioni | LAD9R220 | Protect coil, suppress reverse EMF when DC coil is de-energized |
| Auxiliary Contact Base | LAD9F | Mount multiple auxiliary modules; expandable up to 6 auxiliary contacts maximum |
- Concorrente & Cross-Brand Equivalent
| Marca | Modello | Corrente nominale | Tensione della bobina | Poli / Contatti | Livello dei prezzi | Main Advantages |
| Schneider | LC1F1250MD | 1250UN | 220VCC | 3P / 3NO | Alto | Heavy-duty design, drawer-type coil, facile manutenzione |
| Schneider Alternative | LC1G1250MD | 1250UN | 220VCC | 3P / 3NO | Medio-alto | TeSys Giga series, upgraded replacement for LC1F |
| Siemens | 3TF5544-0XM0 | 1250UN | 220VCC | 3P / 3NO | Alto | Full series compatibility, seamless S7 PLC connection |
| ABB | A1450-30-11 | 1250UN | 220VCC | 3P / 3NO | Alto | Progettazione modulare, flexible auxiliary contact expansion |
| Mitsubishi | S-N1250 | 1250UN | 220VCC | 3P / 3NO | Medio-alto | Japanese quality, cost-performance |
| Eaton | DILM1250(220VCC) | 1250UN | 220VCC | 3P / 3NO | Metà | Struttura compatta, consente di risparmiare spazio nell'armadio |
- Linee guida per la selezione & Soluzioni sostitutive
5.1 Core Selection Rules
Tipo di carico: AC-1 (resistance furnace, stufa) → suitable for LC1F1250MD; AC-3 (motore) → operate with derating or select dedicated AC-3 contactor
Control Supply: 220VDC → choose MD suffix; 220VAC → choose M7 suffix; refer to Schneider coil code table for other voltages
Spazio di installazione: Width 309mm, reserve sufficient cabinet space; for compact layout adopt LC1G series (smaller dimension)
Contatti ausiliari: No built-in auxiliary contacts by default; order LAD9 series auxiliary modules separately
Comodità di manutenzione: Drawer-type coil structure; coil replacement without disconnecting main circuit wiring, ideal for frequent maintenance scenarios
5.2 Modelli sostitutivi consigliati
| Scenario applicativo | Modello consigliato | Motivo |
| Upgrade existing LC1F | LC1G1250MD | TeSys Giga upgraded series, prestazioni più elevate, more compact size, fully interchangeable |
| AC control power supply | LC1F1250M7 | Same main circuit parameters, 220VAC coil for AC control system |
| Controllo motorio (AC-3) | LC1F1250MD (derated to 800A) | Heavy-duty design, usable for AC-3 after derating; alternatively use LC1F1400 |
| Compact cabinet installation | ABB A1450-30-11 | Width 280mm, saves 29mm compared with LC1F1250MD |
| Budget limited | Mitsubishi S-N1250 | Japanese brand, 15-20% lower price than European brands with reliable performance |
| DC supply & funzionamento frequente | LC1F1250MD + LAD9R220 | Surge suppressor protects coil and extends service life |
5.3 Key Technical Advantages
- Heavy-duty Construction: 1260Una corrente nominale, 25kA short-time withstand capability, suitable for large industrial loads
- Drawer-type Coil: Independent coil module; replaceable without removing main circuit wiring, maintenance efficiency improved by 50%
- Ampia compatibilità di tensione: Main circuit up to 690V AC / 460A DC, adaptable to various industrial power systems
- Approvazioni globali: Full CE/UL/CSA/CCC/UKCA certification for worldwide project deployment
- Eco Compliance: Certificato Green Premium, meets RoHS/REACh environmental standards for sustainable application
Schneider LC1F1250MD is a TeSys F Series 3-pole 1250A heavy-duty industrial contactor. Its core strengths are drawer-type DC coil design and high short-circuit withstand capability, perfectly suited for AC-1 non-inductive / slightly inductive loads such as resistance furnaces and heating equipment.
Durante la selezione, focus on control supply type (220VCC), load category (AC-1 optimal), and installation space. For upgrade or replacement, prefer the new-generation TeSys Giga LC1G1250MD, or select LC1F1250M7 (220VCA) according to control power type.
Complete Model List of Schneider TeSys F (LC1F) Contattori (Ultimo 2026 Versione)
Classified by model naming rule, current rating, coil code, full model list and selection guide. Covers all LC1F specifications including 3-pole / 4-palo, AC / Bobina CC, standard / wide voltage versions for heavy-duty industrial control.
- LC1F Model Naming Rule
Format: LC1F[Valutazione attuale][Coil Code][Funzione speciale]
| Segmento | Descrizione | Opzioni & Spiegazione |
| LC | Categoria di prodotto | Contactor product line |
| 1 | Tipo di contattore | 1 = Standard single contactor; 2 = Reversing contactor (avanti/indietro) |
| F | Codice serie | TeSys F Series heavy-duty type, 115A~2100A |
| [Valutazione attuale] | Corrente nominale | 115/150/185/225/265/330/400/500/630/780/1000/1250/1400/1700/2100 |
| [Coil Code] | Tensione della bobina & Tipo | First letter = voltage level; last letter = coil type (7=AC, D=DC) |
| [Funzione speciale] | Optional Feature | S411 = Wide voltage coil (100-250V CA/CC); Blank = Standard version |
Esempio:
LC1F1250MD → 1250A, 220VDC coil
LC1F265M7 → 265A, 220VAC coil
- Coil Voltage Code Table (General for Whole Series)
| Coil Code | Voltaggio | Tipo di bobina | Applicazione |
| B6/B7 | 24V | AC (50/60Hz) | Safety control circuit, PLC output |
| C6/C7 | 36V | AC | Low-voltage safety location |
| E6/E7 | 48V | AC | Industrial control, piccola attrezzatura |
| F6/F7 | 110V | AC | America del Nord / Japan standard control system |
| M6/M7 | 220V | AC | Cina / Asia standard general control |
| P6/P7 | 230V | AC | European standard general control |
| Q6/Q7 | 380V | AC | Industrial high-voltage control, large equipment |
| R6/R7 | 400V | AC | European industrial 3-phase standard |
| S6/S7 | 415V | AC | Commonwealth national standard |
| U6/U7 | 440V | AC | North American industrial standard |
| B.D | 24V | DC | Controllo CC, PLC output |
| CD | 36V | DC | DC low-voltage control |
| ED | 48V | DC | DC industrial control |
| FD | 110V | DC | DC control system |
| MD | 220V | DC | General DC control (più ampiamente utilizzato) |
| PD | 230V | DC | European DC standard |
| QD | 380V | DC | DC high-voltage control |
| S411 | 100-250V | AC/DC Universal | Wide voltage for global projects |
- LC1F Full Current Ratings & Base Models
3P Standard Type (3P/3NO) for AC-1 resistive load and AC-3 motor load:
| Base Model | Rated Current AC-1@440V,40°C | AC-3 Current@400V | Matched Motor Power@400V AC-3 | Larghezza (mm) |
| LC1F115 | 115UN | 115UN | 55kW | 100 |
| LC1F150 | 150UN | 150UN | 75kW | 100 |
| LC1F185 | 185UN | 185UN | 90kW | 125 |
| LC1F225 | 225UN | 225UN | 110kW | 140 |
| LC1F265 | 265UN | 265UN | 132kW | 160 |
| LC1F330 | 330UN | 330UN | 160kW | 180 |
| LC1F400 | 400UN | 400UN | 200kW | 200 |
| LC1F500 | 500UN | 500UN | 250kW | 220 |
| LC1F630 | 630UN | 630UN | 315kW | 250 |
| LC1F780 | 780UN | 780UN | 375kW | 280 |
| LC1F1000 | 1000UN | 1000UN | 450kW | 300 |
| LC1F1250 | 1260UN | 1250UN | 560kW | 309 |
| LC1F1400 | 1400UN | 1400UN | 630kW | 320 |
| LC1F1700 | 1700UN | 1700UN | 750kW | 340 |
| LC1F2100 | 2100UN | 2100UN | 900kW | 360 |
4P Extended Type (4P/4NO): Model suffix with 4 (LC1F1154 ~ LC1F21004). Rated current same as 3P version, suitable for 4-wire systems.
- Complete LC1F Model List by Current
4.1 115A~265A Medium Power
| Modello completo | Attuale | Coil Spec | Poli |
| LC1F115B6 | 115UN | 24V e | 3P |
| LC1F115B7 | 115UN | 24V e | 3P |
| LC1F115BD | 115UN | 24A DC | 3P |
| LC1F115M7 | 115UN | 220V e | 3P |
| LC1F115MD | 115UN | 220A DC | 3P |
| LC1F150M7 | 150UN | 220V e | 3P |
| LC1F150MD | 150UN | 220A DC | 3P |
| LC1F185M7 | 185UN | 220V e | 3P |
| LC1F185MD | 185UN | 220A DC | 3P |
| LC1F225M7 | 225UN | 220V e | 3P |
| LC1F225MD | 225UN | 220A DC | 3P |
| LC1F265M7 | 265UN | 220V e | 3P |
| LC1F265MD | 265UN | 220A DC | 3P |
| LC1F265S411 | 265UN | 100-250V CA/CC | 3P |
4.2 330A~780A High Power
| Modello completo | Attuale | Coil Spec | Poli |
| LC1F330M7 | 330UN | 220V e | 3P |
| LC1F330MD | 330UN | 220A DC | 3P |
| LC1F400M7 | 400UN | 220V e | 3P |
| LC1F400MD | 400UN | 220A DC | 3P |
| LC1F500M7 | 500UN | 220V e | 3P |
| LC1F500MD | 500UN | 220A DC | 3P |
| LC1F630M7 | 630UN | 220V e | 3P |
| LC1F630MD | 630UN | 220A DC | 3P |
| LC1F780M7 | 780UN | 220V e | 3P |
| LC1F780MD | 780UN | 220A DC | 3P |
4.3 1000A~2100A Super High Power
| Modello completo | Attuale | Coil Spec | Poli | Osservazioni |
| LC1F1000M7 | 1000UN | 220V e | 3P | — |
| LC1F1000MD | 1000UN | 220A DC | 3P | — |
| LC1F1250M7 | 1250UN | 220V e | 3P | Popular model |
| LC1F1250MD | 1250UN | 220A DC | 3P | Popular model |
| LC1F1400M7 | 1400UN | 220V e | 3P | Drawer coil type |
| LC1F1400MD | 1400UN | 220A DC | 3P | Drawer coil type |
| LC1F1700M7 | 1700UN | 220V e | 3P | Drawer coil type |
| LC1F1700MD | 1700UN | 220A DC | 3P | Drawer coil type |
| LC1F2100M7 | 2100UN | 220V e | 3P | Drawer coil type |
| LC1F2100MD | 2100UN | 220A DC | 3P | Drawer coil type |
| LC1F2100S411P7 | 2100UN | 100-250V e | 3P | Versione ad ampio voltaggio |
4.4 4-Pole Series (Suffix with 4)
| Modello completo | Attuale | Coil Spec | Poli | Applicazione |
| LC1F1154M7 | 115UN | 220V e | 4P | 4-sistema di fili |
| LC1F1854MD | 185UN | 220A DC | 4P | 3-phase 4-wire |
| LC1F2654M7 | 265UN | 220V e | 4P | Load with neutral line |
| LC1F4004MD | 400UN | 220A DC | 4P | 4-pole protection system |
- Reversing Contactor Models (LC2F Series)
LC2F = Reversing type for motor forward/reverse control with mechanical interlock to prevent simultaneous closing:
| Modello completo | Attuale | Coil Spec | Poli | Interlock Type |
| LC2F115M7 | 115UN | 220V e | 3P+3P | Interblocco meccanico |
| LC2F185MD | 185UN | 220A DC | 3P+3P | Interblocco meccanico |
| LC2F265M7 | 265UN | 220V e | 3P+3P | Interblocco meccanico |
| LC2F400MD | 400UN | 220A DC | 3P+3P | Interblocco meccanico |
- Model Replacement & Upgrade Guide
- LC1F Upgrade: Replace LC1F with LC1G (TeSysGiga); more compact size, 30% performance improvement, fully interchangeable mounting and wiring.
- Coil Replacement: Same current rating different coils are interchangeable (per esempio. LC1F1250M7 ↔ LC1F1250MD, only coil module replaced).
- Load Application:
AC-1 resistive load: Utilizzo 100% corrente nominale
AC-3 motor load: Utilizzo 100% corrente nominale (LC1F designed for heavy duty)
AC-4 frequent starting: Declassare di 30%
- Wide Voltage Requirement: Select S411 suffix model, compatible with 100-250V AC/DC global control power supply.
- Grafico di selezione rapida
| Scenario applicativo | Modello consigliato | Motivo chiave |
| 55kW motor control @400V | LC1F115M7 | Potenza abbinata, conveniente |
| 110kW motor control @400V | LC1F225M7 | Heavy-duty design, funzionamento stabile |
| 560kW resistance furnace | LC1F1250MD | 1260Una corrente nominale, Controllo CC |
| Global multi-voltage project | LC1F265S411 | Wide voltage adaption, no coil replacement needed |
| DC control system | LC1FxxxMD | Bobina CC, strong anti-interference |
| 4-wire distribution system | LC1Fxxx4M7 | 4-pole design for neutral circuit |
| Frequent maintenance site | LC1F1400MD+ | Drawer-type coil structure, facile manutenzione |
![NXC-65 from the Kunlun Series by CHINT Electric is a 3-pole AC contactor, rated at 65A in the NXC series. The full model is typically expressed as NXC-65 [Coil Voltage] [Frequency]](https://www.bestcontactor.com/wp-content/uploads/2026/04/ScreenShot_2026-01-30_132315_324-419x560.png "NXC-65 della serie Kunlun di CHINT Electric è un contattore CA a 3 poli, valutato a 65 A nella serie NXC. Il modello completo è tipicamente espresso come NXC-65 [Tensione della bobina] [Frequenza]")
