コンタクタ,サーキットブレーカー,ソーラーインバーター,電気メーター,太陽電池
ABB XT2N160 TMA 160 3p F F
注文番号: 1SDA061805R1 (1SDA067020R1)
フルモデル: XT2N 160 TMA 160-1600 3p F F
シリーズ: ABB Tmax XT Series 配線用遮断器
- コアパラメータの概要
| パラメータのカテゴリ | 詳細仕様 | 注意事項 |
| 基本情報 | • Frame size: XT2 | For low-voltage power distribution in industry and buildings |
| • Frame current: 160あ | ||
| • Rated current In: 160あ | ||
| • Poles: 3P | ||
| • Breaking capacity: タイプN (36kA @ 415V AC) | ||
| • Rated operating voltage Ue: 690Vと, 500ワシントンDCで | ||
| • Standards: IEC 60947-2, GB 14048.2 | ||
| Trip System | • Trip type: TMA thermal-magnetic (過負荷 + 短絡保護) | Not suitable for earth fault protection; additional accessories required |
| • Overload protection (Ir): Adjustable, 160あ | ||
| • Short-circuit protection (I3): Adjustable, 800～1600A | ||
| • Instantaneous short-circuit protection: Fixed at 10In (1600あ) | ||
| • Protection curve: IECに準拠 60947-2 | ||
| 取り付け & 繋がり | • Mounting type: 修理済み (F) | Standard DIN rail or screw mounting |
| • Connection: Front connection (F) | ||
| • Operation: Direct handle operation | ||
| • Dimensions: 90mm×130mm×82.5mm | ||
| • Weight: 約. 1.574kg | ||
| • Protection degree: IP20 | ||
| Electrical Characteristics | • Rated insulation voltage Ui: 800V | Suitable for AC-1, AC-2, AC-3, AC-4 duties |
| • Rated impulse withstand voltage Uimp: 8kV | ||
| • Rated short-time withstand current Icw: 16kA/1s | ||
| • Rated frequency: 50/60Hz | ||
| • Wiring capacity: 最大. 95mm² copper, 最大. 70mm² aluminum |
- Detailed Protection Characteristics
2.1 過負荷保護 (Thermal)
Characteristic: Inverse time curve per IEC 60947-2
Adjustable range: 160あ (fixed)
Trip time:
1.05で: No trip for long duration
1.3で: Trip within ≤1 hour
6で: Trip within 2~10 seconds
2.2 短絡保護 (Magnetic)
Instantaneous trip: 800~1600A adjustable (I3)
短時間の遅延: 利用不可 (TMA has no short-time delay; TMD or electronic trip required)
Instantaneous short-circuit protection: Fixed at 10In (1600あ), non-adjustable
- 取付寸法 & 身体的特徴
| 寸法 | 価値 | Unit |
| 幅 | 90 | mm |
| 身長 | 130 | mm |
| 深さ | 82.5 | mm |
| 取付穴間隔 | 75 | mm |
| Terminal spacing | 標準 | mm |
| 重さ | 1.574 | kg |
| Package size | 145*130*208 | mm |
| Package weight | 1.2 | kg |
Mounting Requirements:
35mm standard DIN rail (で 60715) 推奨
周囲温度: -25℃～+70℃
高度: ≤2000m (derating required above)
保護: IP20 (フロント); must be installed in enclosure with IP30 or higher
- 交換 & Extended Models in the Same Series
4.1 Direct Replacement Models
| モデル | 違い | 応用 |
| XT2N160 TMA 160 3P F F | Identical specifications | Direct replacement, no modification needed |
| XT2N160 TMA 160 3P P F | Plug-in mounting (P) | Frequent replacement or maintenance |
| XT2N160 TMA 160 3P F W | Rear connection (W) | Limited cabinet space |
4.2 Function-Extended Models
| モデル | Functional Upgrade | 注文番号. |
| XT2N160 Ekip LSI 160 3P F F | Electronic trip, LSI protection | 1SDA067071R1 |
| XT2N160 Ekip LSIG 160 3P F F | Electronic trip, LSIG protection (including earth fault) | 1SDA067072R1 |
| XT2N160 TMD 160 3P F F | Thermal-magnetic with short-time delay | 1SDA067035R1 |
4.3 Pole-Extended Models
4P version: XT2N160 TMA 160 4p F F (注文番号: 1SDA061806R1 / 1SDA067041R1)
Neutral pole rated current: 50% または 100% of phase current optional
4.4 Cross-Brand Reference
シュナイダー: NSX160N TMD160 3P F
シーメンス: 3VT8116-1AA03-0AA0
チント: NM1-160S/3300 160A
- Recommended Accessories
| Accessory Type | モデル | 説明 |
| 補助接点 | XT2-AS11 | 1いいえ + 1ノースカロライナ州, for status indication |
| Alarm contact | XT2-AL11 | 1いいえ + 1ノースカロライナ州, for fault alarm |
| Shunt trip | XT2-SHT | Remote tripping, AC/DC 220V |
| Undervoltage release | XT2-UVT | 不足電圧保護, AC220V |
| Rotary handle | XT2-CR | Door-mounted operation, improved safety |
| Extended rotary handle | XT2-CRE | For deep panels |
| Terminal cover | XT2-TC | Protect terminals, prevent electric shock |
| Label holder | XT2-LB | For marking breaker parameters |
- アプリケーション & Selection Notes
6.1 代表的な用途
Industrial plants: Motor protection (≤160A), distribution feeder protection
商業ビル: HVAC, 点灯, pump control
インフラストラクチャー: Small substations, データセンター, PV systems
その他: OEM equipment, agricultural machinery, marine systems
6.2 セレクションガイド
| 要件 | 推奨 | Not Recommended |
| Motor protection | ✓ (with proper setting) | Small motors (<10あ); use MCB instead |
| Distribution protection | ✓ (sub-circuits) | Main incomer (use XT3/XT4 series) |
| Earth fault protection | ✗ (needs accessories) | ✓ (choose Ekip LSIG) |
| Frequent operation | ✗ (MCCB not suitable) | ✓ (接触器 + リレー) |
| Isolation function | ✓ (IEC 60947-3) | – |
6.3 Selection Cautions
- Ensure rated current In matches load
- Breaking capacity must meet system short-circuit current (N: 36kA @ 415V)
- 取り付け (fixed/plug-in) and connection (front/rear) must match panel design
- Auxiliaries, shunt/undervoltage trips ordered separately
- Not for DC short-circuit protection (use DC-rated model)
- トラブルシューティング & メンテナンス
7.1 一般的な障害 & ソリューション
| 症状 | 考えられる原因 | ソリューション |
| Frequent tripping | 1. 過負荷 | 1. 負荷を確認する |
| 2. Short circuit | 2. Locate short circuit | |
| 3. Incorrect trip setting | 3. Reset settings | |
| 4. 周囲温度が高い | 4. 換気を改善する | |
| Cannot close | 1. No power to undervoltage trip | 1. Check control power |
| 2. Shunt trip not reset | 2. Reset shunt trip | |
| 3. Mechanism fault | 3. Contact ABB service | |
| 4. Line fault | 4. Clear fault | |
| No output after closing | 1. Main contacts damaged | 1. Inspect/replace contacts |
| 2. 配線の緩み | 2. 端子を締める | |
| 3. Trip unit fault | 3. Replace trip unit | |
| Aux contact no signal | 1. Auxiliary contact defective | 1. Replace auxiliary contact |
| 2. Wrong wiring | 2. 配線を確認してください | |
| 3. Improper switching | 3. Adjust contact position |
7.2 メンテナンスに関する推奨事項
検査: Every 6 months – check wiring and mechanism
Cleaning: Every 12 months – remove dust to maintain insulation
Operation test: Once per year – 3~5 manual ON/OFF cycles
Trip test: Once every 2 years – simulate overload and short circuit
Service life: Typically 10 年, depending on duty and environment
- 注文 & 包装
Standard package: 1 unit/box, including installation manual and certificate
MOQ: 1 unit
保証: 18 months from commissioning, または 24 months from delivery (whichever comes first)
Order code: 1SDA061805R1 (or 1SDA067020R1, varies by region)
Complete Model Guide for ABB Tmax XT2 Series (160A Frame)
Frame size: XT2 (160あ)
定格電圧: 690Vと, 500ワシントンDCで
極: 3P / 4P
Breaking classes: N(36の), S(50の), H(70の), L(100の)
- モデルの命名規則
XT2 [Breaking Class] [フレーム電流] [旅行の種類] [Current Range] [極] [取り付け] [繋がり]
Breaking class:
N: 36kA @ 415V (標準)
S: 50kA @ 415V (enhanced)
H: 70kA @ 415V (high performance)
L: 100kA @ 415V (ultimate)
Frame current: 160 (fixed)
旅行タイプ:
TMA: 熱磁気 (過負荷 + 瞬間的な, no short-time delay)
TMD: 熱磁気 (過負荷 + short-time delay + 瞬間的な)
Ekip LSI: 電子 (過負荷 + short-time delay + 瞬間的な)
Ekip LSIG: 電子 (過負荷 + short-time delay + 瞬間的な + earth fault)
Ekip I: 電子 (instantaneous only)
Current range: 例えば, 160-1600 (TMA 160A)
極: 3P / 4P
取り付け: F (修理済み) / P (Plug-in)
繋がり: F (Front) / W (Rear)
- XT2 Series Model List (by Breaking Class)
2.1 Standard Breaking (N, 36の)
| モデルプレフィックス | 旅行の種類 | 代表的なモデル | Current Range | 応用 |
| XT2N160 | TMA | XT2N160 TMA 160-1600 3P F F | 160あ | General distribution, モーター |
| TMD | XT2N160 TMD 100-1000 4P F W | 100あ | Systems requiring short-time delay | |
| Ekip LSI | XT2N160 Ekip LSI R125 3P P F | 125あ | Electronic protection, 遠隔監視 | |
| Ekip LSIG | XT2N160 Ekip LSIG R80 4P F F | 80あ | Earth fault protection required |
Example Order No.: 1SDA061805R1 (XT2N160 TMA 160 3P F F)
2.2 Enhanced Breaking (S, 50の)
| モデルプレフィックス | 旅行の種類 | 代表的なモデル | Current Range | 応用 |
| XT2S160 | TMA | XT2S160 TMA 63-630 3P F F | 63あ | 業界, heavy-duty equipment |
| TMD | XT2S160 TMD 40-400 4P P W | 40あ | Frequently started motors | |
| Ekip LSI | XT2S160 Ekip C Dip LSI R100 3P F F | 100あ | Complex commercial distribution | |
| Ekip LSIG | XT2S160 Ekip LSIG R50 4P F F | 50あ | データセンター, medical facilities |
Example Order No.: 1SDA067021R1 (XT2S160 TMA 160 3P F F)
2.3 High Performance Breaking (H, 70の)
| モデルプレフィックス | 旅行の種類 | 代表的なモデル | Current Range | 応用 |
| XT2H160 | TMA | XT2H160 TMA 32-320 3P F F | 32あ | Industrial systems with high short-circuit current |
| TMD | XT2H160 TMD 3.2-32 4P F F | 3.2あ | Precision equipment, control circuits | |
| Ekip LSI | XT2H160 Ekip Dip LSI R63 3P P F | 63あ | Generators, substations | |
| Ekip LSIG | XT2H160 Ekip LSIG R25 4P F F | 25あ | PV, renewable energy |
Example Order No.: 1SDA067587R1 (XT2H160 TMD 3.2-32 3P F F)
2.4 Ultimate Breaking (L, 100の)
| モデルプレフィックス | 旅行の種類 | 代表的なモデル | Current Range | 応用 |
| XT2L160 | TMA | XT2L160 TMA 100-1000 4P F F | 100あ | Heavy industry with very high fault level |
| TMD | XT2L160 TMD 160-1600 3P F W | 160あ | Large motor control centers | |
| Ekip LSI | XT2L160 Ekip LSI R160 3P P F | 160あ | Metallurgy, 化学薬品, hazardous areas | |
| Ekip LSIG | XT2L160 Ekip LSIG R125 4P F F | 125あ | Petrochemical, mining |
Example Order No.: 1SDA067667R1 (XT2L160 TMA 100-1000 4P F F)
- Trip Unit Comparison
| 旅行の種類 | 保護 | Adjustable Parameters | Typical Load | Price Level |
| TMA | 過負荷 + 瞬時 | Ir, I3 | Motors, general distribution | 経済 |
| TMD | 過負荷 + Short-time + 瞬時 | Ir, Isd, tsd, I3 | Transformers, capacitors | 中くらい |
| Ekip LSI | 過負荷 + Short-time + 瞬時 | Full range, コミュニケーション | Critical distribution | Medium-High |
| Ekip LSIG | 過負荷 + Short-time + 瞬時 + Earth Fault | Full range, コミュニケーション, logging | Sensitive loads, safety | 高い |
| Ekip I | Instantaneous only | I3 | Short-circuit intensive devices | 経済 |
- 特別モデル & Options
4.1 4P Neutral Configurations
標準: Neutral = 50% 段階 (general distribution)
Heavy: Neutral = 100% 段階 (non-linear loads: VFD, UPS)
例: XT2N160 TMA 160 4P F F (100% 中性)
4.2 Plug-in Mounting (P)
Fast replacement, suitable for critical equipment
例: XT2S160 TMD 80 3P P F
4.3 Rear Connection (W)
キャビネットのスペースを節約, compact panels
例: XT2H160 Ekip LSI R63 3P F W
4.4 アクセサリの互換性 (Full Series)
| Accessory | モデル | 説明 |
| 補助接点 | XT2-AS11 | 1NO+1NC, status indication |
| Alarm contact | XT2-AL11 | 1NO+1NC, fault alarm |
| Shunt trip | XT2-SHT | Remote tripping, AC/DC 220V |
| Undervoltage release | XT2-UVT | 不足電圧保護, AC220V |
| Rotary handle | XT2-CR | Door operation, safety |
- Quick Selection Table
| 応用 | Recommended Class | 旅行の種類 | 極 | Mount/Conn |
| 一般産業用 | N/S | TMA/TMD | 3P | F/F |
| Motor protection | N/S | TMA | 3P | F/F |
| Commercial lighting | N | TMA | 3P/4P | F/F |
| Data center | H/L | Ekip LSIG | 4P | F/W |
| PV system | H/L | Ekip LSIG | 4P | F/F |
| Frequent maintenance | Any | Any | 3P/4P | P/F |
- 交換 & Upgrade Path
6.1 Same-Frame Upgrade
遮断容量: XT2N → XT2S → XT2H → XT2L (dimensions unchanged)
Trip unit: TMA → TMD → Ekip LSI → Ekip LSIG
Mount/connection: F/F → P/F or F/W
6.2 Cross-Frame Upgrade
XT2 (160あ) → XT3 (250あ) → XT4 (250A enhanced) → XT5 (630あ)
Note dimension and parameter changes
All XT2 series models comply with IEC 60947-2 とGB 14048.2.
Fixed dimensions: 90mm × 130mm × 82.5mm for easy system expansion and maintenance.
