접촉기,회로 차단기,감지기,인코더,PLC,변환기
기치 SBFX1 Fiber Optic Scanner Module (MULTI-BEAM Series)
메모：SBFX1 is only a scanner block. It does NOT include power module or output module and cannot be powered-up independently. A complete sensor system requires a Power Block plus a Logic Module.
부품 번호: 16652, 940 nm infrared light source, high excess-gain fiber amplifier block, supports through-beam and diffuse fiber detection.
주요 사양
| 목 | 매개변수 |
| 모델 | SBFX1 (MULTI‑BEAM Series) |
| 유형 | Fiber‑optic scanner block (integrated transmitter & receiver) |
| Compatible Fiber | Bifurcated fiber or two separate fibers; glass fiber preferred, minimum bundle diameter 0.5 mm |
| Detection Modes | Diffuse, 투과형 (sensing range fully determined by fiber specification) |
| 응답 시간 | 10 ms (온/오프) |
| 주택 | Reinforced VALOX (PBT) 울로 둘러싼 땅, stainless‑steel fasteners |
| 인클로저 등급 | NEMA1/3/12/13; IEC IP54 |
| 작동 온도 | -40℃ ~ +70℃ |
| 지시자 | AID alignment red LED; blink frequency indicates received light intensity for fiber alignment assistance |
| 치수 | 114 × 53 × 40 mm |
| 광원 | Modulated infrared LED 940 nm |
| 원산지 | 미국 |
작동 원리 & Configuration Instructions
- SBFX1 has no built-in power supply and no output. Complete 3-piece modular assembly:
SBFX1: Scanner block (light transmit/receive + amplification)
Power Block: Provides AC/DC power supply
Logic Module: Select light-on/dark-on, timing, NPN/PNP/relay output
- Fiber Wiring:
확산 모드: Connect one bifurcated fiber
투과형 모드: Connect two separate fibers (one transmit, one receive)
- 이익: High excess gain. Stable performance under harsh conditions, high fiber attenuation and small-bundle fiber applications; well-suited for dusty, oily industrial environments.
메모: For long-range through-beam applications, Banner officially recommends separate SBEXF (transmit) + SBRXF1 (receive) scanner blocks. SBFX1 is not recommended for extra-long through-beam detection.
일반적인 응용 분야
Object presence detection on machine tools, metallurgical and rubber-plastic equipment under harsh conditions
Narrow-space detection (with 0.5 mm small-bundle fiber heads)
Object sensing in high-temperature, dusty and oily environments
개조 & replacement for legacy MULTI-BEAM photoelectric systems
Related Variant Models
SBFX1: Standard 10 ms response scanner block
SBFX1MRM: 5 ms fast-response version, different part number
SBEXF: Transmit-only scanner block; SBRXF1: Receive-only scanner block (for long-range through-beam)
교체 옵션
The original SBFX1 belongs to the legacy Multi-Beam modular series and is phasing out in some supply channels.
Modern Banner drop-in alternatives: DF-G3, DF-G2 all-in-one fiber amplifiers. No stacked power/logic modules required for simpler wiring and setup.
문제 해결 가이드
- AID red LED off: Poor fiber connection, broken fiber, or Power Block not installed.
- LED solid ON but no output: Verify Power Block and Logic Module configuration; check light-on / dark-on setting.
- Dim flickering LED: Excessive fiber attenuation or dirty fiber end-faces. Clean fiber tips first.
- For low-temperature installations, confirm temperature rating for the entire assembly including the Power Block.
