BANNER BT23S 분기 유리 섬유 - 접촉기,회로 차단기,감지기,인코더,PLC,변환기

위챗: +86-13184948252 왓츠앱: 0086-13811255435 이메일: kent@bestcontactor.com

에 대한 연락하다 |

BANNER BT23S 분기 유리 섬유 - 접촉기,회로 차단기,감지기,인코더,PLC,변환기

PLC/

BANNER BT23S 분기 유리 섬유

Model Full Name: BT23S, 퍼지다 (반사) Bifurcated Glass Fiber, Stainless Steel Armored High-Temperature Fiber Part Number: 17276 Core Specifications Sensing Mode: 퍼지다 / 반사 (Bifurcated, transmit & receive integrated fiber) 섬유 소재: Glass fiber bundle Overall Fiber Length: 914 mm (36 인치) 섬유 다발 직경: 3.2 mm (0.125″) 프로브 스레드: 5/16-24 UNF, brass threaded tip, ...

  • 제품 세부정보

Model Full Name: BT23S, 퍼지다 (반사) Bifurcated 유리 섬유, Stainless Steel Armored High-Temperature Fiber

부품 번호: 17276

핵심사양

감지 모드: 퍼지다 / 반사 (Bifurcated, transmit & receive integrated fiber)

섬유 소재: 유리섬유다발

Overall Fiber Length: 914 mm (36 인치)

섬유 다발 직경: 3.2 mm (0.125″)

프로브 스레드: 5/16-24 UNF, brass threaded tip, 2 lock nuts included

칼집: Stainless Steel single-coil SteelSkin armor, crush-resistant, bend-resistant, 절단 방지

최소 굽힘 반경: 25 mm

최대 작동 온도: 249 °C at the sensing tip (high-temperature fiber series)

Light Emission: Inline coaxial output

호환성: 기치 fiber amplifiers (D12, D12E, QS18, R55F, SME312, 등.)

Same Series Cross Reference (for replacement selection)

BT23S: 직선형 스레드 팁, diffuse mode

BTA23S: Angled threaded tip, diffuse mode

BAT23S: Right-angle outlet threaded tip, diffuse mode

IT23S: Opposed mode (separate transmit/receive), straight threaded tip

BA23S: Thread-free right-angle probe, diffuse mode

일반적인 응용 분야

Furnace openings, 열처리 장비, oven surroundings, 용접 스테이션, glass/ceramic production lines, high-temperature zones of injection molding equipment; detection of workpiece presence, position and edge, where standard plastic fibers cannot endure high temperatures.

중요 사항

  1. Glass fiber cannot be cut to length, factory pre-finished assembly only.
  2. The armor can be manually shaped, but never bend below the minimum bend radius to avoid fiber breakage.
  3. Only the probe end is heat-resistant; the fiber amplifier must be kept away from high-temperature areas.
  4. The fiber itself contains no amplification circuit; it must be used with a Banner fiber amplifier.

Operating Principle of Diffuse Fiber Optic Sensors

Clarification first: The fiber only serves as a light transmission path and cannot judge signals independently. The photoelectric conversion and signal evaluation are completed by the fiber amplifier. BT23S bifurcated fiber is designed to work with an amplifier.

기본 구조 (Bifurcated Dual Fiber Bundle)

The fiber is internally split into two bundles:

  1. Transmit Fiber: LED light source inside the amplifier → transmit fiber → probe face, emits infrared light outward.
  2. Receive Fiber: Collects light reflected back from the workpiece → transmits light back to the photoelectric receiver inside the amplifier.

작업 과정

  1. The light source inside the amplifier sends light down the transmit fiber to the fiber probe.
  2. When a workpiece enters the sensing zone, light hits the workpiece surface and creates diffuse reflection (scattered in all directions).
  3. Part of the scattered light is captured by the receive fiber inside the same probe and sent back to the amplifier.
  4. The amplifier converts optical signals into electrical signals and compares them with the internal threshold:

Sufficient reflected light received → Output ON (object detected)

No object / strong light absorption / excessive distance → Weak return light → Output OFF (no object detected)

Key Feature: Transmit and receive share one single probe; no need to mount transmitter and receiver separately. This is the biggest difference from opposed fiber.

Key Influencing Factors (시운전을 위해 & 선택)

  1. 색상 & Reflectivity: White/bright surfaces reflect strongly with longer sensing range; black/dark materials absorb light heavily, drastically shortening detection distance.
  2. Surface Roughness: Rough surfaces produce better diffuse reflection; mirror surfaces cause specular reflection, resulting in unstable detection.
  3. 감지거리: Not a fixed value; highly dependent on amplifier power, fiber specification and workpiece reflectivity.
  4. Background Interference: If bright metal or reflective plate sits directly behind the probe, background reflection will cause false triggering (solve with small-spot fiber, limited beam lens or restricted-range fiber).

Comparison with other fiber types

  1. Diffuse bifurcated fiber (BT23S): Single-ended installation; affected by background and color; easy mounting.
  2. Opposed fiber (IT23S): Separate transmitter & 수화기; object blocks the light path to trigger; color-independent, longer range, requires two-side installation.
  3. Retro-reflective fiber: Single probe + dedicated reflector; light bounces back from the reflector; performance between diffuse and opposed types.

Supplement for BT23S High-Temperature Glass Fiber

The working principle is identical to ordinary plastic diffuse fiber; the only difference is material: glass fiber + stainless steel armor for light transmission with high-temperature resistance; detection logic still relies on amplifier gain and threshold adjustment.

Recommended Amplifiers for BT23S Banner High-Temperature Glass Diffuse Fiber

BT23S adopts T5 terminal glass fiber. Prioritize Banner fiber amplifiers with T5 fiber port; all models run on DC 10–30 V, with complementary NPN/PNP outputs, DIN 레일 장착, suitable for furnace, heat treatment and high-temperature injection molding stations.

Priority ranking: DF-G1 (새로운 주력) D12E (classic heavy-duty) D10 (듀얼 채널) R55F (경제)

첫 번째 선택: DF-G1 Series (New Project Standard)

Model examples: DF-G1-NS-2M, DF-G1-PS-2M

NS = NPN output; PS = PNP output; 2M = 2-meter cable; M12 connector versions are also available

듀얼 디지털 디스플레이: shows real-time return light value + threshold simultaneously for intuitive commissioning

Built-in auto-teach, multi-level gain, anti-crosstalk (no mutual interference when multiple units are mounted side-by-side), 시간제 노동자, light-on/dark-on selection

Optimized for glass fiber; superior performance for dark low-reflectivity workpieces

Ideal for new installations, continuous signal margin monitoring, frequent product changeovers

Shortcoming: Higher price than D12 series

Classic Reliable Model: D12E / D12 시리즈 (Most Popular for Retrofit)

Model examples: D12EN6FP (NPN), D12EP6FP (PNP)

Designed exclusively for T5 terminal glass/plastic fiber; fully compatible with BT23S

Knob adjustment with 1–8 gain levels; one-touch auto-teach supported

Simple mechanical structure, 낮은 실패율; standard for heat treatment furnace retrofits

Best for oven, welding stations and legacy equipment replacement

메모: D12 (non-E) is basic version; D12E enhanced version with improved signal-to-noise ratio — always select D12E first.

Dual-Channel Model: D10 시리즈

모델: D10DNFP / D10DPFP

Two independent fiber channels; one amplifier drives two fiber probes (BT23S + second fiber)

Suitable for combined limit + counting signal on one station

더 높은 비용; not recommended for single-channel detection

Economy Model: R55F Series

R55FV (NPN) / R55FP (PNP)

디지털 디스플레이 없음; only indicator lamp + 전위차계 조정

최저 비용; only for simple presence detection without frequent process changes

한정: Difficult to tune dark low-reflectivity parts; no numerical reading for troubleshooting

❌ Not Recommended for BT23S

SME312: Designed mainly for small-spot plastic fiber; insufficient drive power for this 3.2 mm large-core glass fiber — not the first choice.

Third-party brands (옴론, 키엔스): Electrically functional, but incompatible fiber terminals. Adapters cause light leakage and signal attenuation. Avoid cross-brand mixing in high-temperature applications.

📌 Quick Selection Guide

  1. 새 프로젝트, 쉬운 시운전, signal margin monitoring → DF-G1
  2. Legacy equipment replacement, furnace/heat treatment, 높은 안정성 & stock availability → D12E
  3. One amplifier for two fiber probes → D10
  4. 예산이 제한되어 있음, simple presence detection only → R55F

⚠️ Critical Wiring & Installation Tips for BT23S High-Temperature Fiber

  1. Keep the amplifier away from heat: Probe max 249 ℃; amplifier rated max 70 °C only.
  2. Glass fiber produces weaker return light than plastic fiber — always select high-gain amplifier variants.
  3. Enable anti-crosstalk function when multiple amplifiers are installed side-by-side.
  4. Match NPN/PNP output strictly with PLC input type.

전체 목록: Banner Bifurcated Glass Fiber + Amplifiers + Lens/Housing

All models share T5 terminal, 3.2 mm bundle diameter, 914 mm length, Stainless Steel Skin armor, 최대 249 ℃ (BT23S family), compatible with D12E / DF-G1 / D10 / R55F amplifiers.

  1. Diffuse Bifurcated Glass Fiber (Primary Selection)
모델부품 번호Probe Configuration설명
BT23S17276똑바로 5/16-24 UNF threaded tipStandard straight thread, most widely usedBanner Eng…
BTA23S17221Angled threaded tip (45° bend)실 + 45° bend for narrow side mountingBanner Eng…
BAT23S17222Right-angle outlet threaded tip90° side light emission with thread; preferred for furnace side installationBanner Eng…
BA23S17223Thread-free right-angle probeNo thread, direct mounting without lock nutsBanner Eng…
BR23S17224Rectangular array probeWide-area array beam for large-area detectionBanner Eng…

Supplementary opposed-mode fiber (참고로): IT23S, ITA23S, IAT23S.

  1. Compatible Fiber Amplifiers (T5 Port for BT23S Glass Fiber)

(1) DF-G1 (New Dual-Display, DIN Narrow Housing)

DF-G1-NS-2M: NPN, 2m 케이블

DF-G1-PS-2M: PNP, 2m 케이블

DF-G1-NS-Q7: NPN, M8 커넥터

DF-G1-PS-Q7: PNP, M8 커넥터

DF-G1-KS Series: IO-Link communication version

특징: Dual readout, anti-crosstalk, auto-teach, 시간제 노동자; excellent for dark workpieces.

(2) D12E / D12 Classic Series (Legacy Production Standard)

D12EN6FP: NPN 출력

D12EP6FP: PNP 출력

D12DN6FP / D12DP6FP: Basic non-E version (not recommended)

8-level rotary gain, robust and stable; standard pairing for furnace applications.

(3) D10 Dual-Channel Amplifier

D10DNFP: NPN

D10DPFP: PNP

D10DNFPGQ: M8 connector variant

One unit supports two independent fiber inputs.

(4) R55F Low-Cost Amplifier (디스플레이 없음)

R55FV: NPN

R55FP: PNP

저렴한 가격; only potentiometer adjustment without numerical signal feedback.

(5) Q45 Heavy-Duty Square Amplifier (IP67 for Harsh Dust/Oil)

Q45BB6FQ: DC 10–30 V, NPN+PNP dual output

Q45VR2FQ: AC relay output

Q45VR3FQ: DC relay output

Large yellow square housing for dusty, 기름진, shock-prone environments; dedicated glass fiber port.

(6) DF-G3 Long-Range High-Power Version

DF-G3-NS-Q3 / DF-G3-PS-Q3

High-power infrared LED for weak return light (dark parts, 더 길어진 감지 거리).

  1. Matching Lenses & Protection Housings (Fits BT23S 5/16-24 Threaded Tip)

BT23S probe thread: 5/16-24 UNF. These lenses screw directly onto the probe to focus light, shrink beam spot, extend range and protect the fiber tip.

| L9SS | 스테인레스 스틸 | High-temperature long-distance focusing lens, direct thread fit |

| L16FSS | 스테인레스 스틸 | Focusing lens with reduced spot size for small-part detection |

| L16FAL | Anodized Aluminum | Focusing lens with 0.8 mm ultra-small spot |

| L4C6 | Aluminum Housing | Small-spot lens for edge & 라벨 검사 |

| L9-LENS | 알류미늄 | Standard focusing lens |

| L4C20 | 알류미늄 | Extended-range lens |

메모: Banner does not sell amplifier housings as separate spare parts — the casing is integrated with the amplifier main body.

For amplifier protection: Use DIN rail enclosures or IP67 plastic instrument boxes (third-party purchase). Fiber tip protection is achieved with the above L-series lenses + 스테인레스 스틸 갑옷.

  1. 빠른 선택 요약

새 프로젝트, easy commissioning with signal monitoring → DF-G1

Retrofit for heat-treatment furnaces, 높은 안정성 & stock availability → D12E

Heavy dust/oil, IP67 rugged housing → Q45BB6FQ

좁은 빔 & extended detection range → BT23S + L9SS / L16FSS lens

90° lateral installation → BAT23S

이전:

답장을 남겨주세요

메시지를 남겨주세요