Hakko MONITOUCH V810iCN-080 HMI - 접촉기,회로 차단기,감지기,인코더,PLC,변환기

위챗: +86-13184948252 왓츠앱: 0086-13811255435 이메일: kent@bestcontactor.com

에 대한 연락하다 |

Hakko MONITOUCH V810iCN-080 HMI - 접촉기,회로 차단기,감지기,인코더,PLC,변환기

PLC/

Hakko MONITOUCH V810iCN-080 HMI

The V8 series HMI is discontinued. It is widely used on legacy equipment (예를 들어, Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen. Model Code Definition V810: V8 series, 10.4-inch model i: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port) 기음: Standard VGA (640×480) economy version N: 아날로그 저항성 터치 ...

  • 제품 세부정보

The V8 series HMI 단종되었습니다. It is widely used on legacy equipment (예를 들어, Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen.

모델 코드 정의

V810: V8 series, 10.4-inch model

나: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port)

기음: Standard VGA (640×480) 경제 버전

N: Analog resistive touch panel

080: DC24V power supply variant (suffix D also stands for DC24V; AC models have no such suffix)

핵심 하드웨어 사양

표시하다: 10.4″ TFT 컬러 LCD, 640×480 VGA, 65,536 그림 물감

Touch type: 아날로그 저항성 터치

백라이트: 주도의, rated service life approx. 70,000 시간

메모리: 4.5MB FROM for screen storage; 128KB 스램 (for recipes & alarm logs)

Front panel protection: IP65 (with original waterproof gasket), 후면 IP20

전체 치수: 303.8 × 231.0 × 69.0 mm

Panel cutout size: 289.0 × 216.2 mm (+0.5/-0 용인)

Rear Interface List

  1. LAN RJ45: 10/100Mbps 이더넷
  2. MJ1, MJ2 (8-pin modular): RS232/485
  3. D-Sub9 (CN1): RS232C / RS422/485
  4. USB-A (주인), USB-B (Programming slave port)
  5. CF card slot (legacy CF card, not SD card)
  6. 24VDC power terminal block

메모: V810iCN does NOT support GU video/RGB optional modules

소프트웨어 & 의사소통

프로그래밍 소프트웨어: V-SFT-5 / V-SFT-6 (V-SFT6 supports V8, V9 and V10 series simultaneously)

8-way multi-protocol communication: 최대 연결 8 PLCs of different brands simultaneously (미쓰비시, 지멘스, 옴론, 델타, 온도 컨트롤러, 인버터, 등.)

지원되는 기능: 알람, 추세 그래프, recipe management, macro scripts, PLC ladder transfer, USB printing, CF card backup for screens & logs

교체 옵션 (Discontinued Model Upgrade)

  1. Official Series Upgrade: V1010iC (10.4-인치, identical cutout; project conversion via V-SFT automatic tool) – Top priority for direct replacement
  2. Domestic HMI Replacement: 10.4-inch local HMIs. Requires redeveloping project screens and reconfiguring communication protocols.

Important reminder: V8→V10 project conversion is irreversible. Always back up the original project before conversion.

일반적인 결함 & 유지 관리 팁

Typical failures: Unresponsive touch, touch offset, 검은 화면, backlight failure, communication loss, unreadable CF card

예비 부품: Touch panel, LED 백라이트, power board, CF card, backup battery for SRAM

유지보수 노트: Legacy CF cards are difficult to source. Use USB for program upload/download whenever possible.

Hakko MONITOUCH V8 Series (Hakko Electronics / 후지전기) 전체 모델 목록

The entire V8 series is end-of-life (단종).

접미사 설명

나: Built-in LAN Ethernet port; no i = no Ethernet port

에스: High-performance model, supports GU RGB video optional modules

티: Mid-range model

기음: Standard economy model (V810iCN belongs to this branch)

중: Simplified model exclusive to V806

CH: 7.5-inch handheld type

엑스: 15-inch XGA high-end model

N: 아날로그 저항성 터치; 디 / 080: DC24V 전원 공급 장치

5.7-인치 | V806 Series (320×240QVGA)

V806M / V806iM

V806C / V806iC

V806T / V806iT

Power variants: V806iCD, V806iTD, V806iMD (DC24V)

7.5-인치 | Handheld Model V808CH

V808CH / V808i

8.4-인치 | V808 Series (640×480 VGA)

V808C / V808iC

V808S / V808iS

Power variants: V808iCD, V808iSD (DC24V)

10.4-인치 | V810 Series (640×480 VGA, your target model here)

V810C / V810iC (경제 버전; V810iCN-080 falls here; iC version cannot install GU video modules)

V810T / V810iT (중거리, supports GU optional units)

V810S / V810iS (고성능, supports GU video/RGB modules)

Suffix variants: N (저항성 터치), D/080 (DC24V), 예를 들어, V810iCN, V810iTN, V810iSN

12.1-인치 | V812 Series (800×600 SVGA)

V812S / V812iS (고성능, supports GU video modules)

15-인치 | V815 Series (1024×768XGA)

V815iX (V8 series flagship; 이더넷 + 비디오 입력)

Function Comparison Table

Model BranchBuilt-in LAN (나)GU Video Module Support포지셔닝
V8xxC (V810iC/V808iC)Optional i❌경제 (standard for injection molding machines)
V8xxT (V810iT)Optional i✅Mid-range general purpose
V8xxS (V810iS/V812iS/V808iS)Optional i✅고성능
V815iX✅✅15″ XGA top model
V806MOptional i❌5.7-inch entry-level
V808CHOptional i❌7.5-inch handheld

Optional Units (For V8i models with expansion port, excluding V810iC)

GU-00/01/02/03/10/11: RGB video input units; DUN-10: V806 dedicated expansion unit

소프트웨어 & 대사

프로그래밍 소프트웨어: V-SFT5 / V-SFT6

Official upgrade series: V10 series (V1010iC is the preferred drop-in replacement for V810iCN, same cutout size; one-click project conversion in V-SFT6)

Replacement Model List for V810iCN-080 (Hakko MONITOUCH)

Key specs of original unit: 10.4-인치, DC24V, 내장 이더넷, 경제 등급, no video expansion port, cutout size: 289.0 × 216.2 mm

  1. Original Brand Upgrade (첫 번째 선택: Project Migration, No Cutout Modification)

(1) V10 시리즈 (Current Fuji/Hakko Mainstream, Official Recommended Replacement)

V1010iC-D (탑픽)

✅ Identical panel cutout; no cabinet modification required. V-SFT6 automatically converts V8 project files.

✅ Equipped with LAN, serial ports and USB; SD card replaces legacy CF card.

⚠️ Resolution upgraded from 640×480 to 800×600; screens auto-scale with minor control adjustments needed. Converted projects cannot be opened again on V8 software.

V1010iS-D (High-end Alternative)

Supports video input with higher performance, same cutout dimensions for future video expansion needs.

(2) V9 시리즈 (Transitional Discontinued Model, Only Stock Available)

V9100iC (Official designated replacement for V810iC series)

Project migration via V-SFT6. Stock availability is limited; not the first choice.

(3) V8 Series Spare Replacement (Only for Used Secondhand Parts, Not for New Purchases)

V810iTN-080 / V810iSN-080

동일한 개요 & cutout size; extra video expansion port. The original V810iCN cannot fit GU modules, while iTN/iSN support video add-ons. Project files can be downloaded directly without modification.

  1. Domestic HMI Replacement (Project Reconfiguration Required)

Selection criteria: 289×216mm cutout, 10.4-인치, DC24V, 이더넷 + RS485/232 ports

와인텍: MT8106iP / MT8106iE (Check cutout carefully; adapter plate may be needed)

쿤룬 통타이: TPC1061Ti (Verify cutout dimensions)

Kinco / 신제: Most 10.4-inch high-end models require custom adapter panels or cabinet re-cutting.

불리: V-SFT project files cannot be imported directly; full re-configuration and communication debugging required.

선택 비교표

교체 모델No Cutout ModificationDirect Project MigrationVideo Module Support공급현황
V1010iC-D✅✅ (V-SFT6 conversion)❌Commercially available
V1010iS-D✅✅✅Commercially available
V9100iC✅✅❌단종, only stock/used
V810iTN/080✅✅✅단종, secondhand only
Domestic 10.4″ HMIAdapter plate may be needed❌, full re-programmingDepends on modelAbundant stock

Critical Migration Notes

  1. Back up the original V8 project file before conversion; V8→V10 conversion is irreversible.
  2. Recipes and alarm logs stored on the original CF card must be exported and imported separately after migration.
  3. 통신 프로토콜 (Mitsubishi MC, 지멘스 S7, Omron Hostlink, 등.) are fully compatible with V10; protocol parameters remain almost unchanged.
  4. Terminal pin assignments, 24V power and serial pinouts differ. Always cross-check the V10 manual before wiring.

이전:

다음:

답장을 남겨주세요

메시지를 남겨주세요