Schneider ATV71HD30N4Z Vector Inverter

알티바르 71 고성능 벡터 인버터, 30kW/40HP, Discontinued Model

✅ 모델 코드 설명

ATV71: Altivar71 high-performance vector series, dedicated for heavy-duty and complex machinery

시간: High-power frame

D30: 30kW

N4: 3-phase 380～480V, 내장형 EMC 필터

지: Without Chinese graphical keypad (simple keypad supplied as standard; graphical panel must be ordered separately as VW3A1101)

📋 Core Electrical Specifications

🛠️ Typical Applications

Heavy-duty equipment, 크레인, 압출기, 공작 기계 스핀들, 윈치, 원심분리기, compressors and other machinery requiring high starting torque and low-speed high-precision operation. SIL2 safe stop function supported.

⚠️ Product Lifecycle

수명 종료 (단종). No new production from OEM; 예비 부품 & repair service available until 2028-03-31 (domestic version service period subject to minor differences). Not recommended for new projects; existing units can be repaired or replaced with second-hand units.

🔁 Recommended Replacement Models

1. ATV930D37N4Z: ATV930 high-end vector drive, direct counterpart to ATV71, 37kW frame, 헤비 듀티, suitable for hoisting/winch and other demanding applications
2. ATV340D30N4E: New generation ATV340 with Ethernet, cost-effective option for general heavy-duty machinery

교체 노트: ATV71 parameters cannot be migrated directly to ATV930/ATV340. Reconfiguration via SoMove software is required. IO terminal definitions, braking units and encoder options need verification.

📌 Options & 유지보수 노트

1. Graphical keypad: VW3A1101 (별도로 판매됨, not included for Z version)
2. Encoder card: VW3A3401/VW3A3402 (for closed-loop vector control)
3. 제동 장치: External braking unit + resistor required for frequent start/stop or overhauling loads
4. Minimum applicable motor: ≥7.5kW (0.25 × inverter rated power). Motor protection is unreliable below this rating; no-load test only allowed briefly under V/F mode.

❗ Quick Reference for Common Faults (ATV71 Series)

OSF: 과전압. DC bus >535V at stop; check supply voltage and braking resistors

올프: 모터 과부하; verify motor nameplate current and thermal overload parameters

OHF: Inverter overheating; blocked heat sink, aging cooling fan, excessive ambient temperature

OPF: Output phase loss; inspect motor cables, terminals and motor winding continuity

ATV71HD30N4Z (30kW) Engineering Application Cases

Unit Features: Heavy-duty constant-torque vector control, full torque at 1Hz, SIL2 safe stop, Modbus/CANopen communication. Discontinued stock unit. Widely used on medium & large machinery commissioned from 2008 에게 2020.

사례 1: Single-screw Plastic Extruder (플라스틱 기계, 클래식 애플리케이션)

Process Overview

PE/PP pipe extrusion line, 30kW main screw drive motor. The screw builds melt pressure at low speed and maintains stable extrusion at high speed. Load fluctuates heavily and speed variation is prohibited; otherwise pipe wall thickness will be uneven.

구성

운전하다: ATV71HD30N4Z (graphical panel mounted on control cabinet door)

제어: Open-loop flux vector; optional encoder card VW3A3401 for closed-loop upgrade

의사소통: 모드버스. PLC reads frequency, current and load rate to synchronize feeder master-follower control

보조자: External braking unit + braking resistor to dissipate DC bus energy during emergency stop

성능

Full torque available at 1Hz; speed drop <0.5% under sudden load change. Soft start reduces gearbox shock; multi-speed recipe switching supported.

Common Field Faults

고온 & dusty environment over time clogs heat sink and triggers OHF overheat alarm. Aged cables cause OPF output phase loss.

사례 2: Gantry Crane Hoist (Lifting Industry)

Process Overview

10-ton gantry crane, 30kW hoist motor. Heavy load lowering, anti-sway prevention under suspended load, fine low-speed jogging and high safety requirements.

구성

운전하다: ATV71HD30N4Z with encoder feedback card for closed-loop vector control

기능: Brake timing control, load detection, SIL2 safe stop, 170% 60초 동안 과부하

Master-follower: Torque following master-follower control for dual-motor synchronization

성능

High torque retained at zero speed to prevent load slipping while suspended. Smooth low-speed jogging with minimal shock; reliable overload/overspeed protection.

주목: 제동 장치 + resistor mandatory for hoisting applications. Potential energy loads during lowering easily trigger OSF overvoltage.

사례 3: Decanter Centrifuge (환경 / Sludge Dewatering)

Process Overview

Municipal sludge dewatering decanter centrifuge, 30kW main drive. Drum and scroll differential speed control; load varies drastically with sludge concentration, requiring continuous controllable torque.

구성

ATV71HD30N4Z drives main drum; a smaller ATV71 drives scroll. Torque master-follower control. PLC dynamically adjusts differential speed.

성능

Adapts to sludge concentration fluctuations to prevent blockage and stall; high torque for low-speed start. Fast protective shutdown on fault to protect scroll blades.

사례 4: Metallurgical Roller Table / Steel Pipe Tipper (Metallurgical Finishing Line)

Process Overview

Steel pipe finishing line tilting mechanism, frequent start-stop, positioning accuracy, shock load and fast braking requirement.

구성

ATV71HD30N4Z with external braking resistor, flux vector control. PLC networking of multiple inverters via CANopen for full roller line coordination.

성능

Fast start-stop reduces pipe collision damage. Parameter tuning enables accurate stop without encoder, improving product yield.

사례 5: Winder for Textile Jigger Dyeing Machine (Tension Control)

Process Overview

Fabric jigger dyeing machine. Tension sensorless constant tension winding via inverter torque control mode, stable tension across high/low speed range.

구성

ATV71HD30N4Z as winding drive. PLC calculates roll diameter and inertia compensation. ATV71 runs in torque mode with speed limit protection.

성능

Low tension fluctuation during acceleration/deceleration to avoid fabric stretching. Near-zero tension dyeing improves fabric quality.

General Selection & 교체 지침

1. ATV71HD30N4Z is a heavy-duty unit, 충격 하중에 적합, high inertia and torque-critical equipment. ATV61 is generally selected for light-duty fans and pumps.
2. Not recommended for new projects due to EOL status. Priority replacement for retrofit: ATV930D30N4. ATV340D30N4E for general machinery.
3. 매개변수 마이그레이션: ATV71 parameters cannot be imported directly into ATV930. SoMove only supports parameter comparison. IO terminals, braking logic and encoder card hardware differ and require separate commissioning.

ATV71HD30N4Z (30kW) Application Cases in Food & 음료 산업

Unit Features: Heavy-duty constant-torque vector control, full torque at 1Hz, SIL2 safe stop, Modbus/CANopen communication. Discontinued legacy unit. Widely adopted for high-power agitation, homogenization and main conveying drives in dairy, fruit juice, sauce and grain & oil production lines. Food workshop characteristics: 습한 환경, periodic washdown, heavy load fluctuation, strict requirements on speed/torque stability, safe stop and production traceability.

사례 1: High-Power Mixer for Dairy Batching Tank (Yogurt / Formulated Milk Line)

Process Overview

30m³ dairy batching tank with 30kW agitation motor. Viscous cream, milk powder blend and diluted liquid milk show variable load with liquid level and viscosity. High low-speed torque prevents sedimentation while high speed ensures emulsification. Low-speed mixing required during CIP cleaning.

구성

운전하다: ATV71HD30N4Z installed in control cabinet (away from washdown zone)

제어 모드: Open-loop flux vector, multi-speed recipe, Modbus setpoint from PLC

보호: SIL2 safe stop, motor thermal protection, 실속 보호

보조자: External braking resistor for fast mixer braking on emergency stop

성능

Full torque at 1Hz enables smooth start with high-viscosity tank bottom material without stalling. One-click speed switching for batch recipes. 현재의 & frequency uploaded to SCADA for dairy production traceability compliance.

Common Field Issues

High moisture in workshop causes condensation inside cabinet and OHF overheat alarms. Material tangling on impeller creates sudden load rise and triggers OLF motor overload.

사례 2: Main Drive for Fruit Juice / Tomato Paste High-Pressure Homogenizer

Process Overview

Concentrated fruit juice and tomato paste homogenization process, 30kW main machine. Reciprocating plunger shock load with periodic pulsation. High speed stability required; speed deviation directly affects particle fineness and final taste.

구성

ATV71HD30N4Z, closed-loop vector (optional encoder card VW3A3401)

의사소통: CANopen to production line PLC, master-follower synchronization with feed pump

과부하 능력: 170% overload for 60s to withstand plunger shock loads

성능

Speed fluctuation controlled within ±0.2%. Fast response under sudden load without tripping. Soft start/stop reduces mechanical shock on gearbox and crankshaft and extends overhaul intervals.

Process Risk Note: Homogenizer is a shock-load application. Light-duty inverters such as ATV61 are not acceptable; ATV71 heavy-duty model is mandatory.

사례 3: Main Chain Drive for Tunnel Pasteurizer for Beer & Beverages

Process Overview

Bottled juice and beer spray pasteurization tunnel, 30kW main chain motor. Long belt with large inertia requiring smooth ramp start/stop and segmented speed adjustment to prevent bottle tipping. Speed switch for different bottle types (유리 / 애완 동물).

구성

ATV71HD30N4Z, open-loop vector control

기능: Adjustable ramp, anti-runaway, fault safe stop

Interlock: Linked with bottle in/out detection signals, speed reduction / stop on bottle jam

성능

Shock-free smooth start prevents bottle tipping. Continuously adjustable speed to match required pasteurization holding time. Fault messages uploaded to HMI for line troubleshooting.

Environmental Notes

High temperature and humidity around pasteurization tunnel accelerates oxidation of cables and terminals; regular inspection to prevent OPF phase loss.

사례 4: Grain & Oil Industry – Main Drive of Horizontal Screw Oil Press

Process Overview

Peanut / rapeseed cold pressing line, 30kW main screw motor for pressing chamber. Uneven raw material feeding creates severe load fluctuation and high risk of blockage. High low-speed torque required for extrusion; torque limiting protects screw in blockage events.

구성

ATV71HD30N4Z, torque-prioritized vector mode

기능: Blockage detection, torque limit, SIL2 safe stop

제동 장치: External braking resistor dissipates DC bus voltage for high-inertia shutdown and prevents OSF overvoltage

성능

Stable extrusion torque maintained despite feed rate variation. Hard stall avoided on blockage; auto-reverse discharge reduces downtime.

사례 5: Horizontal Powder Mixer for Baking Raw Material Line

Process Overview

Horizontal powder mixer for pre-blended flour and chocolate powder, 30kW main agitation motor. Heavy starting load from accumulated powder; load varies with material level during mixing. Multi-speed required for recipe switching.

구성

ATV71HD30N4Z, open-loop vector, 다중 속도. Modbus link to batching PLC for automatic three-stage speed control: feeding, mixing and discharging.

성능

Smooth start at no-load or full-load condition. Torque monitoring assists material level detection for semi-closed loop feeding control.

General Maintenance & Replacement Notes for Food & 음료 산업

1. 환경 보호: Inverter must be fitted inside independent control cabinet, never mounted directly in washdown areas. Cabinet heater recommended to reduce condensation from CIP cleaning.
2. 안전 요구 사항: Mandatory safe stop for food machinery. Built-in SIL2 safe stop was a key reason for widespread adoption of ATV71 on food equipment.
3. Replacement Selection: ATV71 discontinued. Priority retrofit unit: ATV930D30N4. ATV610 can be used for general process pumps and fans, while ATV930 preferred for heavy-duty mixing, homogenizing and chain drives.
4. Migration Reminder: ATV71 parameters cannot be imported directly into ATV930. 토크 제어, safety circuit and encoder card hardware logic differ and require separate commissioning.
5. Frequent Faults: Corroded terminals in humid environment cause OPF output phase loss; 먼지 + condensation clog heat sink and trigger OHF overheat; material jamming leads to OLF overload.

슈나이더 ATV71 Series List (380~480V, N4 with built-in EMC, Suffix Z = No Graphical Panel. ATV71HD30N4Z Included)

Model Coding Description

ATV71: Altivar71 high-performance heavy-duty vector inverter

HU: Small frame; HD: 미디엄 프레임; HC: Large frame

Numeric code: Rated motor power (kW)

N4: 3-phase 380～480V, 내장형 EMC 필터

지: No Chinese graphical keypad (simple keypad only; remove Z for version with graphical panel)

Series Status: Full Series End of Life (단종)

1. HU Frame (Low Power ATV71HUxxN4Z)

1. HD Frame (Medium Power ATV71HDxxN4Z, Target Model Frame)

III. HC Frame (High Power ATV71HCxxN4Z)

1. Equivalent Versions Without Suffix Z (Graphical Panel Included, N4)

예: ATV71HD30N4 (supplied with graphical panel). The naming rule remains identical by removing trailing Z.

1. Brief Introduction of Other Voltage Versions (Outside N4 400V Range)

M3: 단상 220V

와이: 690V high voltage version (ATV71HDxxY)

S6X: 500~600V North American model

1. 선택 & Replacement Summary
2. All ATV71 HU/HD/HC frames are constant-torque heavy-duty inverters, 170% 60초 동안 과부하, suitable for mixing, 압출, hoisting, centrifuges and chain conveyors (음식 & beverage applications)
3. Replacement series: ATV930 (high-end vector, direct ATV71 counterpart); ATV340 for general applications
4. Standard communication: 모드버스+CANopen; encoder closed-loop control requires separate VW3A3401/VW3A3402 cards
5. 안전: Built-in SIL2 safe stop, widely used on food machinery and general mechanical equipment