Sensor de marca colorida DATALOGIC S65-PA-5-W09-PH

Marca: Datalogic (Itália) | Official Part No.: 954201020

The S65-PA-5-W09-PH is an industrial contrast (color mark) sensor fotoelétrico of Datalogic S65-W Series. It features a compact standard 50×50 mm square housing and a broad-spectrum white LED emitter, which accurately detects brightness differences between colored/grayscale labels and substrates.

Equipped with a 4-digit LED display and 3-button teach-in system, it allows parameter configuration and signal strength visualization without external devices. Built-in RS485 serial interface supports remote configuration and data transmission. With a maximum switching frequency of 30 kHz and response time of 16 μs, it is ideal for high-speed automated production lines. The IP67 ingress protection rating ensures reliable operation in harsh industrial environments.

Detalhamento do código do modelo

Segmento de código	Descrição
S65	Série de produtos: Universal platform for 50×50 mm square industrial photoelectric sensors, covering color mark detection, color recognition, laser ranging and other detection types
PA	Habitação & Optical Layout: P = ABS plastic housing; A = 90° radial light emission design
5	Electrical Interface: M12 5-pin circular industrial connector
W09	Detection Type & Optical Specification: W = White LED for contrast / detecção de marca de cor; 09 = Optical configuration for standard sensing range
PH	Saída & Function Configuration: P = PNP switching output; H = Integrated RS485 communication interface + output delay function

Principais Especificações Técnicas

Optical Performance

Princípio de detecção: White light reflective contrast (color mark) detection

Emissor: Broad-spectrum white LED (Comprimento de onda: 400~700 nm)

Operating Distance: 12 ~ 20 milímetros (Tolerância: ±2 mm)

Tamanho do ponto: 3×1 mm @ 19 mm nominal sensing distance

Digital Resolution: 12 pedaço (4096 grayscale levels)

Tempo de resposta: 16 μs

Frequência de comutação: 30 kHz

Especificações Elétricas

Tensão de alimentação: 10 ~ 30 CCV

No-load Current Consumption: ≤50 mA

Tipo de saída: PNP switching output

Maximum Load Current: ≤100 mA

Output Saturation Voltage Drop: ≤2 VDC

Interface de comunicação: RS485 serial interface, supporting parameter read/write and remote control

Recursos de proteção: Proteção contra curto-circuito, proteção contra polaridade reversa, surge overvoltage protection

Electrical Safety Class: Aula 2

Mecânico & Parâmetros Ambientais

Material da Habitação: ABS engineering plastic; Lens Material: Vidro

Proteção de entrada: IP67 (Dust-tight and protected against temporary immersion)

Temperatura operacional: -10 ~ +55 ℃

Temperatura de armazenamento: -20 ~ +70 ℃

Resistência à vibração: 0.5 amplitude mm, 10~55 Hz all axes, compatível com EN 60068-2-6

Resistência ao choque: 30G acceleration, 11 ms pulse, all axes, compatível com EN 60068-2-27

Unit Weight: ≤60 g

Main Models in the Same Series

Modelo completo não.	Tipo de saída	Configuração de interface	Key Functional Differences
S65-PA-5-W09-PH	PNP	M12 5-pin + RS485	White light color mark detection, with communication and delay functions
S65-PA-5-W09-NH	NPN	M12 5-pin + RS485	White light color mark detection, NPN output version
S65-PA-5-V19-PPP	3-channel PNP	M12	LED tricolor RGB, for color recognition
S65-PA-5-Z03-PPI	PNP + 4-20 saída analógica mA	M14	Linear reflective type, for width and edge positioning measurement

Aplicações Típicas

Packaging Lines: Color mark positioning for vertical/horizontal packaging machines, label detection for labellers, cutting synchronization for bag making machines
Impressão & Paper Industry: Registration mark recognition, paper slitting positioning, printed product quality inspection
Comida & Indústria Farmacêutica: Film alignment for filling machines, label detection for vials, positioning for medicine plates
Montagem Eletrônica: Material label presence detection, conveyor synchronization, auxiliary material remaining quantity detection

Troubleshooting Matrix

Fenômeno de falha	Causa raiz	Step-by-Step Solutions
Indicator off, sem saída	Abnormal power supply or incorrect wiring	1. Measure supply voltage to ensure it is within 10~30 VDC
		2. Verify M12 pin assignment and check for reverse power connection
		3. Check connector tightness and cable continuity
Missing detection / Falso acionamento / Unstable output	Failed calibration, offset light spot or insufficient contrast	1. Perform new teach-in calibration for background and color mark respectively
		2. Adjust mounting position to ensure the light spot fully covers the color mark
		3. Avoid direct strong ambient light; ensure target contrast ≥ 10%
Abnormal output delay	Incorrect parameter settings or disabled function	1. Enter delay setting menu via panel buttons and verify delay switch & time parameters
		2. Read configurations via RS485 bus to check for parameter tampering
		3. Restore factory settings and reconfigure delay parameters
No response on RS485 communication	Wrong wiring sequence, mismatched parameters or address conflict	1. Check A/B communication wiring for reverse connection
		2. Match baud rate, bits de dados, station address and other parameters with host system
		3. Troubleshoot address conflicts among devices on the bus

Observação: The S65-PA-5-W09-PH is a standard 5-pin version without RS485 interface. Models with RS485 in the same series are suffixed with Z (por exemplo. S65-PA-5-W09-PHZ), equipped with 8-pin M12 connector. This sensor features adjustable output delay (1~100 ms), external synchronous trigger input and button lock function.

M12 5-Pin Pinout Definition

This sensor adopts IEC 61076-2-101 standard A-coded M12 5-pin connector, complying with general specifications of Datalogic S65 platform.

Pino Não.	Standard Wire Color	Nome do sinal	Descrição da função
1	Marrom (BN)	+Em DC	Power positive, 10~30 VDC supply
2	Branco (WH)	SYNC Input	External sync / remote teach input, active high (connected to +V). Supports line synchronous trigger and one-touch remote calibration
3	Azul (BU)	0V / GND	Power negative and common signal ground
4	Preto (BK)	OUT PNP	PNP switching output, máx.. load current 100 mA with short-circuit protection
5	Grey (GY)	Escudo / NC	Shield grounding terminal. Leave unconnected if shielding is not required; no analog output for this model

Wiring Notice: When viewing the connector front with the notch facing down, pins are arranged clockwise as 1→2→3→4→5. Hot plugging may damage internal circuits. Always cut off power before wiring.

Comparação de modelos equivalentes entre marcas

Below are mainstream color mark sensors with equivalent positioning and applications, suitable for high-speed color mark detection in packaging and printing industries.

Marca & Modelo	Distância de detecção	Fonte de luz	Tempo de resposta	Frequência de comutação	Tipo de saída	Housing Dimension	Principais vantagens & Notas de aplicação
Datalogic S65-PA-5-W09-PH	12~20 mm	Broad-spectrum white LED	16 μs	30 kHz	PNP	50×50 mm square	4-exibição de dígitos & 3 buttons for clear parameter visualization; delay adjustable, econômico
SICK KT5W-2P1116	≤10 mm	LED tricolor RGB	50 μs	10 kHz	PNP	30×53×80 mm rectangular	Auto-select optimal wavelength; reliable for low-contrast labels, fits narrow mounting space
Banner R58ECRGB1	12.7 milímetros (nominal)	LED tricolor RGB	15 μs	33 kHz	Universal PNP/NPN	50×50 mm square	Die-cast zinc alloy housing with superior vibration & interference resistance; simple one-touch teach-in
OMRON E3S-DCP21	10~20 mm	White LED	20 μs	25 kHz	PNP	50×50 mm square	Optimized for reflective materials such as aluminum foil and glossy film; strong ambient light resistance and excellent batch consistency

Recomendações de seleção de substituição

Direct replacement with compatible mounting holes: Banner R58 series is preferred, with fully compatible 50×50 mm mounting holes and better overall performance.

High-speed production lines (velocidade 200 m/meu): Keep Datalogic S65 or Banner R58 for better adaptability to 30 kHz high switching frequency.

Low-contrast / multi-color label applications: Choose SICK KT5W or Banner RGB models for higher recognition tolerance with tri-color light source.