IFM SI6800 Flow Monitor

(Thermal Flow Switch)

Modelo: SIR11ABBFPKG/US-100-IPF

IFM hygienic thermal flow monitor operating on the thermal calorimetric principle, designed for liquid/gas flow velocity monitoring and dry-run protection, specially for hygienic pipelines in food & indústrias de bebidas e farmacêutica.

✅ Key Features

1. Hygienic Design: Wetted parts in 1.4435 (316eu) aço inoxidável, Ra＜0.4μm. Supports CIP cleaning and SIP high-temperature sterilization up to 140°C for short duration, compliant with EHEDG. G1 Aseptoflex Vario aseptic thread interface, compatible with various hygienic adapters.
2. Mostrar & Operação: 10-segment tri-color LED bar graph for real-time flow velocity and switchpoint indication. Single-button calibration with parameter lockout to prevent unintended modification.
3. Elétrica: PNP single switching output, NO/NC software-selectable. Supply DC 19~36V; M12 A-coded connector; short-circuit and reverse polarity protection.
4. Proteção de entrada: IP67 / IP69K, suitable for high-pressure washdown.
5. Measurable Media: Liquids and gases.

📋 Key Technical Specifications

🛠️ Principle & Calibração

Thermal principle: The probe integrates heating and temperature-sensing elements. Heat is carried away by flowing media, and flow velocity variation is converted into electric signals.

Supports two-point calibration: zero-flow calibration (stationary medium) + full-flow calibration

Padrão de fábrica: calibrated for water, switchpoint at LED7 (70~79 cm/s), NO output.

Observação: Recalibration is mandatory when changing media (water → oil / ar comprimido), otherwise switchpoint drift will occur.

🧪 Typical Application Scenarios

Comida & beverage production lines: proteção contra funcionamento a seco da bomba, pipeline no-flow alarm

Pharmaceutical purified water and CIP cleaning loop flow monitoring

Compressed air pipeline gas flow monitoring

Heat exchanger and cooling circuit no-flow protection

⚠️ Installation Guidelines

1. Hygienic installation requirement: self-draining mounting to avoid dead legs; no dead zones on sealing surfaces; drain port facing downward for vertical installation.
2. Probe must be fully immersed in medium; keep away from turbulence induced by elbows, valves and reducers (≥5×pipe diameter straight pipe upstream).
3. Media with high solid content or high viscosity tend to foul the probe rod and cause signal drift; regular tip cleaning is required.
4. Not suitable for heavy pulsating or surge flow conditions.

🔁 Alternative Selection Reference

Same IFM series:

SI6600: short probe, general hygienic type

SI6700: medium-length probe

SI6800: 55 mm probe, hygienic SIP version (the model here)

Alternativas domésticas: hygienic thermal flow switch with G1 thread, 316L wetted parts, IP69K, Saída PNP. Key selection checkpoints: probe length, surface roughness, SIP temperature resistance.

📌 Common Troubleshooting

1. Flow exists but no signal: probe fouling; invalid calibration; large medium temperature variation.
2. Frequent false alarms: severe pipeline pulsation, small hysteresis setting; turbulent flow at installation point; probe not fully immersed.
3. Full red LED flashing: calibration failure, check medium condition.

IFM SI6800 Field Application Cases

SI6800 features EHEDG hygienic rating, CIP/SIP capability, polished 1.4435 wetted parts and IP69K washdown rating. It is mainly used for minimum flow monitoring and no-flow protection (thermal principle, no moving parts). Below are field engineering cases sorted by industry.

Caso 1: Pharmaceutical Purified Water & CIP Cleaning Loops (Mais Comum)

Condição de trabalho: Purified water distribution network and CIP detergent pipelines in pharmaceutical workshops. Mídia: ambient purified water, 85℃ acid/alkaline detergent, short-time SIP sterilization at 135℃.

Objectives:

1. Monitor circulation pump dry-run protection; trigger PLC interlock to stop pump on no-flow to prevent dry-running damage.
2. Verify flow during CIP cleaning to confirm the cleaning loop is operational.
3. Alarme: trigger audible & visual alarm when flow drops below threshold and record batch data.

Justificativa de seleção:

Tolerates transient high SIP temperature; wetted surface Ra＜0.4μm with no dead legs, meeting GMP hygienic requirements.

IP69K for direct high-pressure washdown; G1 Aseptoflex Vario aseptic thread adapts to hygienic welding adapters.

Setup Tips: Two-point calibration (static zero-flow + operating flow); switchpoint set at 10~20 cm/s; EPDM seal recommended.

Caso 2: Cervejaria & Beverage Production Line (Mashing & Filling CIP)

Condição de trabalho: Cooling water loop for mash tun, CIP cleaning pipeline for juice production. Mídia: água gelada, alkaline detergent, low-solids fruit juice.

Objectives:

No-flow protection for cooling water circulation to maintain mash tun cooling performance.

CIP validation: confirm detergent flow in pipeline to satisfy required cleaning duration, serving as one of batch release conditions.

Limitações: Not recommended for high-pulp, high-fiber viscous media; fouling on probe rod easily causes signal drift.

Engineerig Tips: Install on straight pipe with ≥5D straight section upstream; CIP can flush probe periodically to reduce fouling.

Caso 3: Cooling Water Circuit for Bioreactor

Condição de trabalho: Jacket cooling water for fermenter (deionized water with small amount of ethylene glycol), 24h continuous operation.

Objectives: Cooling water loss protection. Shut down fermenter heating immediately once cooling flow is lost to avoid microbial inactivation from overheating.

Vantagens: Thermal probe with no impeller, not jammed by minor impurities in water; much lower maintenance than target-type flow switches.

Observação: Recalibration is mandatory for ethylene glycol media; factory water calibration cannot be reused.

Caso 4: Hygienic Compressed Air Aseptic Pipeline (Gas Monitoring)

Condição de trabalho: Filtered clean compressed air for aseptic workshops in pharmaceutical & food plants.

Objectives: Monitor minimum gas flow of process purge air, detect air supply interruption or pre-filter clogging; detect minor leakage.

Configuração de parâmetros: Switch to gas mode, threshold ≥200 cm/s; add proper time delay to suppress false alarms caused by gas pulsation.

Observação: Gas measurement responds slower than liquid; adjust delay parameters.

Caso 5: Dairy Industry (Milk & Yogurt Pre-treatment Pipeline)

Condição de trabalho: Raw milk transfer pipeline before pasteurization, CIP circulation. Mídia: 4~12℃ raw milk; 85℃ acid/alkaline detergent during CIP, batch production with daily CIP.

Objectives: Pump dry-run protection and CIP loop flow confirmation.

Nota de Risco: Milk protein tends to adhere to probe rod at elevated temperature. Full probe tip coverage during CIP is mandatory, otherwise false flow alarms will occur.

Caso 6: Cooling Loop of Small Hygienic Heat Exchanger

Condição de trabalho: Cooling water monitoring for food-grade plate heat exchanger.

Objectives: Cooling water loss protection to prevent material coking on plates due to overheating and avoid production downtime and equipment repair.

Comparative Advantage: Electromagnetic flowmeter is costly for small hygienic pipelines. SI6800 is insertion-mounted, cost-effective for simple flow switch alarm without volumetric totalization.

Seleção Geral & Installation Summary for Field Implementation

1. Aplicações adequadas: Only require flow presence / minimum flow alarm, no need for precise volume totalization; pipelines requiring CIP/SIP sterilization.
2. Aplicativos inadequados: High viscosity, high solid content, abrasive media; heavy pulsating surge flow; applications requiring high-precision flow measurement.
3. Instalação: Probe fully immersed in medium; stay away from turbulence generated by elbows, valves and reducers; self-draining installation preferred to avoid liquid pooling dead legs.
4. Calibração: Recalibrate when changing media (water→ethylene glycol/compressed air); recheck calibration after large temperature swings.

Comparação da Mesma Série (For Alternative Proposal)

SI6600: short probe for small-bore hygienic pipelines

SI6700: medium-length probe

SI6800: 55 mm long probe, for larger pipe sizes and SIP sterilization pipelines

IFM SI6800 Food & Beverage Field Application Cases

SI6800 is an EHEDG-certified hygienic thermal flow monitor supporting CIP cleaning and short-time SIP sterilization up to 140℃, with polished 1.4435 wetted parts and IP69K high-pressure washdown capability. It functions as a no-flow / minimum flow switch, not for flow totalization. Below are typical field cases in food & bverage plants.

Caso 1: Dairy (Raw Milk / Yogurt) Pre-treatment Pipeline — Pump Dry-Run Protection

Condição de trabalho: Raw milk transfer pipeline before pasteurization. Mídia: 4~12℃ raw milk; 85℃ acid/alkaline detergent during CIP. Batch production with daily CIP.

Process Objectives

1. Monitor minimum flow in feed pump pipeline. Trigger PLC interlock to stop pump on no-flow, to prevent pump dry-grinding damage and material overheating coking.
2. CIP circulation validation: confirm continuous detergent flow as one of batch release conditions for CIP.

Justificativa de seleção

Dead-leg-free hygienic design compliant with 3A/EHEDG, compatible with acid/alkaline CIP detergents used in dairy plants including Ecolab chemicals.

No impeller or moving parts, not jammed by milk protein or minor milk fat.

IP69K rated for direct high-pressure washdown in workshop.

Dicas de comissionamento

Switchpoint setting: 10~15 cm/s; two-point calibration (static zero-flow + rated operating flow).

Risco: Milk protein adheres to probe rod at high temperature. CIP must fully cover probe tip, recalibrate periodically to avoid drift and false alarms.

Caso 2: Craft Brewery — Mash Cooling Loop + CIP Validation

Condição de trabalho: Cooling water loop for mash tun; CIP circulation for wort pipeline. Mídia: cold water, 80℃ alkaline detergent.

Process Objectives

1. No-flow protection for cooling water during mashing: loss of cooling water causes uncontrolled wort temperature and impacts fermentation flavor. Alarm is triggered and heating cut off when flow drops below threshold.
2. CIP sequence validation: confirm circulation of cleaning liquid to avoid false cleaning in empty pipes and ensure traceable batch cleaning records for compliance.

Pontos de seleção

SI6800 long probe (55 milímetros) fits DN50~DN80 hygienic pipes, ensuring probe insertion into central flow stream.

Supports short-time SIP sterilization and directly compatible with mash system sterilization.

Limitações: Not recommended for main wort pipelines with high spent grain and high solids due to fouling risk. Prefer installation on clean cooling water and CIP return lines.

Caso 3: Juice / Plant-Based Beverage Line (Apple Juice, Oat Drink) CIP Return Monitoring

Condição de trabalho: CIP return pipeline for concentrated juice and oat beverage production. Mídia: rinse water, high-temperature acid/alkaline detergent.

Process Objectives: Automated batch judgment for CIP, confirm cleaning liquid circulation meets flow and duration requirements, generate traceable cleaning records for factory internal audit and customer inspection.

Dicas de engenharia

Instalação: ≥5D straight pipe upstream, self-draining mounting to avoid dead legs (EHEDG mandatory requirement).

Seal selection: EPDM seal compatible with food-grade acid & alkaline cleaners.

Calibração: Calibrate with cleaning water instead of juice media.

Caso 4: Aseptic Filling Workshop for Bottled Beverages — Aseptic Compressed Air Pipeline Monitoring

Condição de trabalho: Process purge air and bottle pre-purge clean compressed air pipeline in aseptic filling.

Process Objectives: Monitor minimum purge gas flow to detect air supply interruption or pre-filter clogging; trigger no-air alarm to prevent contamination of aseptic environment.

Configuração de parâmetros: Switch to gas mode, threshold ≥200 cm/s; add proper time delay to suppress false alarms induced by gas pulsation.

Caso 5: Plate Heat Exchanger Cooling Loop (Shared for Beverage & Dairy)

Condição de trabalho: Cooling water monitoring for food-grade plate heat exchanger.

Process Objectives: Cooling water loss protection to prevent high-temperature material coking on heat exchanger plates, production shutdown and equipment maintenance.

Comparative Advantage: Electromagnetic flowmeters are expensive for small hygienic pipelines. SI6800 adopts insertion mounting and is cost-effective for simple flow switch alarm without volumetric metering.

✅ General Application Guidelines for Food & Indústria de Bebidas

✔ Suitable Scenarios for SI6800

CIP/SIP hygienic pipelines requiring only no-flow / minimum flow alarm, no flow totalization required.

Mídia: água, cleaning detergent, low-solids beverages, clean compressed air.

Workshop requires high-pressure washdown (IP69K) and EHEDG/3A hygienic certification.

❌ Cenários não recomendados

High-pulp, high-fiber, high-viscosity media such as jam and chocolate slurry; heavy fouling on probe rod easily causes signal drift.

Heavy pulsating or surge flow.

Applications requiring precise volumetric flow measurement (select SMF hygienic electromagnetic flowmeter instead).

Common On-site Faults (Frequent in Food Plants)

1. Probe fouling by milk protein / juice sugar → false flow alarm: strengthen CIP flushing, periodically remove and polish probe.
2. Calibration drift: recalibrate after large medium temperature variation or detergent replacement.
3. Installation dead legs: liquid pooling and microbial growth if not self-draining, failing hygienic audit.