Módulo de entrada digital Schneider BMXDDI3202KH - Contator,disjuntor,sensor,Codificador,CLP,Conversor

Conversamos: +86-13184948252 Whatsapp: 0086-13811255435 E-mail: kent@bestcontactor.com

Sobre Contato |

Módulo de entrada digital Schneider BMXDDI3202KH - Contator,disjuntor,sensor,Codificador,CLP,Conversor

CLP/

Módulo de entrada digital Schneider BMXDDI3202KH

Série: Modicon X80 (M340 PLC) Explicação do modelo: BMXDDI3202KH = BMXDDI3202K + H; H = Conformal Coating version for harsh environments. Electrical specifications are identical to BMXDDI3202K. Only the PCB is coated with conformal coating for moisture-proof, mould-proof and salt-spray resistance, suitable for ports, chemical plants, underground sites, high-humidity and dusty conditions. ✅ Basic Specifications Type: ...

  • Detalhes do produto

Série: Modicon X80 (M340 PLC)

Explicação do modelo: BMXDDI3202KH = BMXDDI3202K + H; H = Conformal Coating version for harsh environments. Electrical specifications are identical to BMXDDI3202K. Only the PCB is coated with conformal coating for moisture-proof, mould-proof and salt-spray resistance, suitable for ports, chemical plants, underground sites, high-humidity and dusty conditions.

✅ Especificações básicas

Tipo: 32-channel isolated digital input module, Afundar (lógica positiva)

Tensão de entrada: 24CCV, sensor supply range 19~30VDC

Input current per channel: 2.5mA @24V

Lógica 1: ≥11V / ≥2mA; Lógica 0: ≤5V / ≤0.5mA

Impedância de entrada: 9600Oh

Tempo de resposta: Typical 4ms, maximum 7ms

Isolamento: Channel-to-channel isolation, resistência de isolamento >10MΩ at 500VDC

Fiação: Compatible with 2-wire / 3-wire proximity switches (IEC61131-2 Type3, IEC60947-5-2). Input parallel connection is not allowed

Conector: Single 40-pin FCN interface, slot único, troca a quente suportada

Consumo de energia: ≤3.9W; Typical backplane 3.3V consumption 121mA

Enclosure protection: IP20

📌 Matching Cables (40-pin FCN)

  1. BMXFCWxxx3: Pre-wired loose cables (3m/5m/10m: BMXFCW303 / BMXFCW503 / BMXFCW1003)
  2. BMXFCCxxx3: Pre-assembled HE10 terminal cables (0.5/1/2/3/5/10eu)

🧩 Compatible CPUs

Full Modicon M340 series: BMXP34xx00, BMXP34xx20 (including H versions). General X80 rack, configured via Unity Pro software.

⚖️ Model Comparison

BMXDDI3202K: Versão padrão, no conformal coating, for conventional control cabinets

BMXDDI3202KH: Conformal coated version for harsh environments. Fully interchangeable in program, pinout and cabling.

📎 Alternative Selection Reference

Same-platform replacement: No drop-in equivalent. For fewer points, refer to BMXDDI1602K(H) (16-point Sink DI).

Substituição doméstica: Verify sink logic, isolation and filter time, suitable for domestic PLC remote IO modules.

⚠️ Troubleshooting Tips

  1. No input signal: Check 24V supply, sensor polarity (Afundar, signal connects to 0V), broken pins in prefabricated cables.
  2. Piscando / falso acionamento: Check voltage drop and shielding. This module uses fixed hardware filter; filter parameters cannot be modified by software.
  3. Prefer KH version for humid and corrosive environments; standard K version is prone to PCB corrosion under long-term high humidity.

Schneider Entrada Digital (DE) Module List by Platform

Observação: Suffix H = Conformal coating for harsh environments. X80 platform compatible with M340 / M580; Sink = sinking input, Source = sourcing input; AC = AC input.

  1. Modicon X80 (BMX series, M340 / M580)

Entrada digital CC (BMXDDI)

ModeloPontosDescrição
BMXDDI1602K / BMXDDI1602KH1624CCV, Afundar
BMXDDI1603K / BMXDDI1603KH1648CCV, Afundar
BMXDDI1604T16125CCV, Afundar, temperatura ampla
BMXDDI3202K / BMXDDI3202KH3224CCV, Afundar (the model you enquired)
BMXDDI3203K / BMXDDI3203KH3248CCV, Afundar
BMXDDI3232K / BMXDDI3232KH3212/24CCV, Sink/Source configurable
BMXDDI6402K / BMXDDI6402KH6424CCV, Afundar

AC Digital Input (BMXDAI)

ModeloPontosDescrição
BMXDAI08058220VAC
BMXDAI08148100~120VAC
BMXDAI16021624VAC/24VDC, Fonte
BMXDAI16031648VAC
BMXDAI160416100~120VAC
BMXDAI161416220VAC

X80 Safety DI (Safety PLC dedicated)

ModeloPontosDescrição
BMXSDI160216Safety digital input, 24CCV
  1. Série TM3 (Expansion for M221/M241/M251/M262 Compact PLC)
ModeloPontosDescrição
TM3DI8824CCV, terminais de parafuso
TM3DI8G824CCV, spring clamp terminals
TM3DI8A8120VAC
TM3DI161624CCV, terminais de parafuso
TM3DI16G1624CCV, spring clamp terminals
TM3DI16K1624CCV, HE10 connector
TM3DI32K3224CCV, HE10 connector
  1. Advantys STB Distributed Remote IO
ModeloPontosDescrição
STBDDI37251624Coletor VDC
STBDDI3420824Coletor VDC
STBDDI3610424Coletor VDC
STBDAI02002100~240 VCA
STBDAI04004100~240 VCA
  1. Notas Suplementares
  2. X80 naming rule: `BMXDDI` = DC DI; `BMXDAI` = AC DI; `K` standard, `KH` conformal coated.
  3. K and KH variants of the same model are fully interchangeable in pinout, programming and backplane interface, only differing in PCB protection.
  4. Mixed I/O modules (DI+DO) such as BMXDDM16022 are excluded from this table.

Application Scenarios of Schneider Digital Input (DE) Módulos (X80/STB/TM3, etc.)

Core function of DI modules: Collect binary switch signals, transfer ON/OFF status from external dry contacts, sensores, botões, limit switches and auxiliary contacts of contactors to PLC. It only detects on/off status and does not process analog signals. The following is sorted by industry and signal type, applicable to BMXDDI3202KH and other X80 modules.

  1. General Signal Acquisition (Used across all industries)
  2. Botões, interruptores seletores, botões de parada de emergência

Local cabinet operation, remote control boxes, E-stop signals (general E-stop; safety E-stop should use dedicated safety DI module BMXSDI1602).

  1. Interruptores de limite, interruptores de viagem, interruptores de proximidade, sensores fotoelétricos

Equipment position detection: cylinder confirmation, interruptores de porta, baffle limit for material level, object presence detection.

BMXDDI3202KH is 24VDC Sink, compatible with mainstream NPN proximity switches.

  1. Auxiliary contacts of contactors / relés, circuit breaker status feedback

Motor running feedback, VFD ready feedback, circuit breaker open/close status, thermal relay fault signals.

  1. Dry contact signals

Fire alarm systems, controle de acesso, damper/valve position feedback in HVAC, float level switches.

  1. AVAC

Correndo / fault feedback of fans and water pumps

Pressostatos diferenciais, frost protection switches, air damper / water valve end-position feedback

Alarme de pressão diferencial do filtro, high/low float level switches

Feedback of smoke exhaust dampers and fire dampers

Conformal coated KH versions (BMXDDIxxxxKH) are preferred for humid and dusty machine rooms.

  1. Tratamento de Água, Fornecimento de água & Drenagem, Estações de Águas Residuais

Level switches (high level, nível baixo, overflow)

Pump run, falta, hand-auto status

Limit signals for bar screens and sludge scrapers

Pulse signals from flow meters (high-speed pulses require dedicated high-speed counter modules; standard DI is not suitable for high-frequency pulses)

Válvula aberta / closed position feedback

KH coated modules are widely used in corrosive, high-humidity wastewater sites.

  1. Embalagem, Linhas de montagem & Linhas de produção automatizadas

Photoelectric detection for material presence / missing material

Cylinder and clamp confirmation signals

Conveyor belt jam and deviation switches

Barcode detection, silo level switches

Safety gate and guard door status signals

BMXDDI6402K (64-point DI) is commonly used for high-point-count lines to save slots.

  1. Crane Systems, Transporte & Warehouse Logistics

Crane travel limits, upper/lower hard limits, buffer switches

Pallet in-position, bay detection

Roller conveyor deviation and E-stop loop feedback

Roller shutter and guard door status

  1. Power Distribution Rooms & Energy Monitoring

Circuit breaker and disconnector open/close position feedback for high-voltage cabinets

Intertravamento da porta do armário, earthing switch status

Transformer thermostat switches, cooling fan feedback

DC panel fault alarm dry contacts

BMXDAI AC DI modules are often used for 220VAC cabinet signals.

  1. Óleo & Gás, Indústria química, Portas (Ambientes Adversos)

Valve position feedback, pump status, dry contact output of combustible gas detectors

Limit switches and door interlocks for trestle and quay equipment

Salt spray, high humidity and condensation → select KH conformal coated versions (BMXDDI3202KH etc.). Standard K versions are vulnerable to corrosion.

  1. Automação Predial, Fire Protection & Estações de bombeamento

Dry contact alarms from fire host, sprinkler pressure switches

Elevator interlock signals, smoke exhaust fan status

Rainwater pumps, sump tank level monitoring

✅ Quick Selection Guide by Scenario

Normal indoor control cabinet, ambiente seco: BMXDDIxxxK

Químico / porta / alta umidade & spray de sal: BMXDDIxxxKH (revestimento isolante)

220VAC contact signals: BMXDAI AC DI

Safety circuits, portões de segurança, safety E-stop: BMXSDI safety DI

Máquinas pequenas, low I/O count: TM3DI series

Distributed remote IO with scattered field points: STB Advantys remote DI

⚠️ Scope Limitations (What DI modules cannot do)

  1. Cannot directly measure 4-20mA or temperature (AI analog modules required)
  2. Standard DI is not suitable for high-frequency pulse counting (high-speed counter module required)
  3. Safety functions shall not be implemented via ordinary DI; dedicated safety DI modules are mandatory.

Anterior:

Próximo:

Deixe uma resposta

Deixe um recado