Schneider BMXDDO3202KC Digital Output Module - Contator,disjuntor,sensor,Codificador,CLP,Conversor

Conversamos: +86-13184948252 Whatsapp: 0086-13811255435 E-mail: kent@bestcontactor.com

Sobre Contato |

 Schneider BMXDDO3202KC Digital Output Module - Contator,disjuntor,sensor,Codificador,CLP,Conversor

CLP/

Schneider BMXDDO3202KC Digital Output Module

Série: Modicon X80 32-point Sourcing Transistor Digital Output Module, Conformal Coated (Severe Environment Version) Corresponding standard non-coated version: BMXDDO3202K ✅ Model Code Explanation BMX: X80 I/O Series DDO: Digital Discrete Output 32: 32 canais 02: 24VDC transistor output K: Sourcing type (Positivo / Current Source) C: Revestimento isolante (anticorrosão, à prova de umidade, dust-proof for severe environments) 📌 ...

  • Detalhes do produto

Série: Modicon X80 32-point Sourcing Transistor Digital Módulo de saída, Conformal Coated (Severe Environment Version)

Corresponding standard non-coated version: BMXDDO3202K

✅ Explicação do código do modelo

BMX: X80 I/O Series

DDO: Digital Discrete Output

32: 32 canais

02: 24VDC transistor output

K: Sourcing type (Positivo / Current Source)

C: Revestimento isolante (anticorrosão, à prova de umidade, dust-proof for severe environments)

📌 Core Electrical Specifications

Tipo de saída: Sourcing transistor (PNP, lógica positiva)

Fornecimento externo: 24CCV, range 19~30VDC

Rated current per channel: 0.125UM (nominal 0.1A)

Maximum total module current: 3.2UM

Corrente de fuga fora do estado: ≤0.1mA

On-state voltage drop: <1.5V

Tempo de resposta de saída: 1.2EM

Channel parallel connection: Permitido, máx.. 3 channels in parallel

Consumo de energia: 3.6C

Backplane 3.3V current draw: Aprox.. 125mA

Isolamento: 500CCV, insulation resistance >10MΩ

Proteção: Proteção contra polaridade reversa, sobretensão, current limiting; 2A external fast fuse recommended for each group against short circuit

Conector: 1 × 40-pin FCN flat cable connector (no built-in terminal block, requires matched FCN40 cable)

🧱 Mecânico & Ambiental

Dimensões: W32 mm × H100 mm × D86 mm

Peso líquido: 0.11 kg

Classe de proteção: IP20 (module only, montado em gabinete)

Temperatura operacional: 0 ~ +60℃ (coated version, suitable for high-humidity, empoeirado, salt-spray environments)

MTBF: Aprox.. 290,000 horas

Certificações: CE, UL, CSA, UKCA, EAC, RCM, marine classification certification

🤖 PLC Compatibility

Modicon M340 (local rack / X80 remote I/O)

Modicon M580 (local rack / X80 remote I/O, ePAC)

⚠️ Selection Comparison

ModeloRevestimentoTipo de saída
BMXDDO3202KPadrão, sem revestimento32 × 24VDC sourcing transistor
BMXDDO3202KCRevestimento isolante (C)32 × 24VDC sourcing transistor

🛠️ Typical Application & Notas

  1. Suitable for driving DC24V indicators, small relays, solenoid coils (observe single-channel current limit)
  2. Wiring only via 40-core FCN flat cable; incompatible with regular terminal bases directly
  3. Transistor output cannot drive AC loads, sem contatos mecânicos, not suitable for high-frequency large inductive loads. Freewheeling diode in reverse parallel is mandatory for inductive loads
  4. Coated version for water treatment, mineração, marinho, outdoor cabinets and other high-humidity corrosive scenarios
  5. Matched FCN40 Factory Cables

Cables are fully interchangeable between BMXDDO3202KC and BMXDDO3202K, 40-pin Fujitsu FCN connector

1) Flying-lead type (strip wires directly to cabinet terminals)

BMXFCW303: 3eu, 40-essencial, pre-stripped colour-coded wires split into 2 grupos de 20

BMXFCW503: 5eu

BMXFCW1003: 10eu

2) With ABE7 Telefast terminal base (HE10 dual connector, most common for engineering)

One BMXDDO3202KC requires 2 pcs of ABE7 16-point bases

BMXFCC053: 0.5eu

BMXFCC103: 1eu

BMXFCC203: 2eu

BMXFCC303: 3eu

BMXFCC503: 5eu

BMXFCC1003: 10eu

Common ABE7 bases for reference:

ABE7H16C10, ABE7R16S111, ABE7R16T111 (16-point sourcing DC output terminal blocks)

Observação: Third-party compatible FCN40 cables (MISUMI, Weidmüller etc.) are available on market. Confirm specs before purchase: Fujitsu FCN-40P male, 0.14mm², 24Em DC

  1. I/O Address Mapping (M340/M580, Unidade Pró / EcoStruxure Control Expert)

The module occupies 2 output words (%QW), total 32 pedaços

Channels Q00~Q15 → %QWx.0 ~ %QWx.15 (1st word)

Channels Q16~Q31 → %QW(x+1).0 ~ %QW(x+1).15 (2nd word)

Automatic rack allocation rule:

M340 local rack: Allocated sequentially by slot after CPU; X80 remote I/O racks follow scanner configuration order.

Channel-level diagnostics supported; curto-circuito / overload status word can be read in the program.

  1. Pinout Summary (FCN40 connector, PNP sourcing)

1~20: Q00~Q15 outputs + grouped supply SPS+, SPS-

21~40: Q16~Q31 outputs + grouped supply SPS+, SPS-

Module internally divided into 2 independent supply banks of 16 canais cada. Independent 2A fast fuse per bank recommended. Para cargas indutivas (solenóides, relés), connect reverse freewheeling diode (1N4007) across coil terminals.

  1. Lista de verificação para solução de problemas
  2. RUN LED off

Poor backplane bus contact: Re-seat module, check rack latches; test in alternative slot

Insufficient backplane power; rack power supply undersized

Hardware module damage (coated version less prone to corrosion failure; check backplane first)

  1. RUN LED ON, channel LEDs do not follow program output

Confirm PNP sourcing wiring: Negative terminal of load to 24V-, output provides +24V

Loss of external SPS supply, fusível queimado (failure of half channels usually means fuse blown for that bank)

Wrong program address, forced value or interlock blocking output

  1. Channel LED ON but load not actuated

On-state voltage drop>1.5V: Short circuit at load, burnt channel; measure channel voltage to GND

Leakage current: Dim glow at OFF state is inherent transistor leakage (≤0.1mA, common for small indicators)

  1. Repeated channel fault / burnt channels

Missing freewheeling diode for inductive loads, breakdown by back EMF

Single-channel current over 0.125A; total module current exceeds 3.2A limit

Reverse polarity of external 24V supply, high voltage intrusion

  1. Special notes for humid/corrosive environments (KC coated version)

Conformal coating protects PCB only; not resistant to condensation or liquid ingress. Cabinet temperature control and dehumidification required

FCN connector pins vulnerable to salt spray oxidation; apply contact protection spray on connectors

  1. Opções de substituição (Same-platform / Domestic PLC replacement)

✅ Direct Schneider substituição da mesma plataforma (no program change, no base modification)

Standard non-coated version: BMXDDO3202K (only without conformal coating, parâmetros elétricos idênticos)

Aviso: Do not replace KC directly with K for humid / salt-spray / mining environments, service life will be drastically reduced

✅ Domestic alternatives (complete PLC replacement, incompatible with X80 backplane, program migration required)

Selection criteria: 32-point 24VDC PNP sourcing transistor output, 0.1Um por canal, with channel diagnostics

Opções comuns:

  1. Inovação: AM600 series AM600-32DO (PNP, check revision)
  2. Xinje: XD/XG series 32-point DO module
  3. HCFA: HC-A0/HC-Q series 32-point transistor output
  4. HollySys: LX series 32DO sourcing module

Lembrete importante: Domestic modules have no FCN40 port, terminal-block design only. If existing FCN wiring harness is retained, domestic modules cannot be used for direct swap; only Schneider X80 applies.

  1. Additional Maintenance Notes

Parallel channels allowed: Máx.. 3 channels in parallel for higher drive current

Tempo de resposta: 1.2EM, not suitable for high-speed pulse / PWM output

Armazenar: Coated modules resist corrosion, but avoid high temp & humidity for long-term storage; sealed moisture-proof storage recommended

BMXDDO3202KC Full Technical Datasheet (Oficial Schneider)

Série: Modicon X80; Tipo: 32-point 24VDC sourcing (PNP) transistor digital output module; C = Conformal Coated Severe Environment Version

  1. Informações Básicas

Modelo: BMXDDO3202KC

CPUs compatíveis: Modicon M340 / M580 (local rack, X80 remote I/O station)

Contagem de canais: 32 FAZER, split into 2 banks × 16 independent supply domains

Tipo de saída: Solid-state transistor, Positive Sourcing (PNP)

Padrão: EN/IEC 61131-2

Interface: 40-pin Fujitsu FCN flat cable interface, no built-in terminal block

  1. Electrical Output Ratings

External supply SPS: CC24V, 19V ~ 30V CC

Rated continuous current per channel: 0.1UM; limite atual: 0.125UM

Max total module output current: 3.2UM

Corrente de fuga fora do estado: ≤0.1mA

On-state voltage drop: <1.5V

Tempo de resposta de saída: 1.2 EM

Parallel channels: Permitted, máx.. 3 channels in parallel

Proteção contra sobrecarga: Built-in current limiting + viagem eletrônica, overload range 0.125~0.185A

Proteção contra curto-circuito: On-board current limiting, external 2A fast fuse required for each 16-channel bank

Proteção contra sobretensão: Transil transient suppressor diode; reverse protection: reverse diode

Isolamento: 500CCV, insulation resistance>10MΩ

Fault detection threshold: >18V DC = normal; <14V DC = upstream supply fault alarm

Consumo típico de energia: 3.6C

Backplane 3.3V bus consumption: Typical 125mA

  1. Diagnóstico & Indicadores

RUN green: Module healthy

ERR red: Module fault / falha no ônibus

Independent green LED per channel: Indicação de status do canal

Channel-level diagnostics supported: Curto-circuito, sobrecarga, external supply loss; fault word readable in CE/Unity Pro

  1. Especificações Mecânicas

Dimensões: W32 mm × H100 mm × D86 mm

Peso líquido: 0.11 kg

Classe de proteção: IP20 (module only, cabinet use)

PCB treatment: Revestimento isolante (umidade, mould and salt spray resistant)

  1. Classificações Ambientais

Temperatura operacional: 0 ℃ ~ +60 ℃

Temperatura de armazenamento: -40 ℃ ~ +85 ℃

Umidade relativa: 5% ~ 95%, sem condensação (coating does not stop condensation or water ingress)

MTBF: 312,254 horas (reference)

Certificações: CE, UL, CSA, UKCA, EAC, RCM, certificação marítima

  1. Software Address Assignment

Output occupancy: 2 %QW words (QWx, QWx+1), total 32 pedaços

Q0~Q15 → QWx bit0~bit15

Q16~Q31 → QWx+1 bit0~bit15

  1. Comparison with Non-coated Sibling Model

BMXDDO3202K: Identical electrical specs, no conformal coating, standard indoor environment only

BMXDDO3202KC: Revestido conformal, for mining, tratamento de água, marinho, high-humidity salt-spray cabinets

  1. Limitações Críticas (Foco em Engenharia)
  2. Saída transistorizada, sem contatos, cannot drive AC loads. Freewheeling diode mandatory for inductive loads
  3. Not designed for high-speed pulse / PWM output
  4. Two banks of 16 channels with isolated supplies; blown fuse only impacts that bank of 16 pontos
  5. Only compatible with FCN40 cables (BMXFCW/BMXFCC series); direct connection to generic terminals not supported

Schneider Modicon X80 (M340/M580) Digital Output DO Module List

Code definition:

DDO: Solid-state DC transistor output; DRA/RDC: Saída de relé; DAO: Triac AC output

K = Sourcing PNP; 12 = Sinking NPN; C = Conformal coating Severe; H = Wide temp + revestimento isolante; suffix H = severe environment grade

Interface classification: Direct terminal / FCN flat cable (requires ABE7 terminal base + FCW/FCC cable)

  1. DC Transistor Output (BMXDDO Series, 24CCV)
ModeloPontosTipoAtual por canalInterfaceObservações
BMXDDO160216Sourcing PNP0.625UM20-pin direct terminalStandard high-current transistor
BMXDDO1602H16Sourcing PNP0.625UM20-pin direct terminalWide temp coated severe -25~70℃
BMXDDO161216Sinking NPN0.125UM20-pin direct terminalStandard sinking
BMXDDO1612H16Sinking NPN0.125UM20-pin direct terminalWide temp coated sinking
BMXDDO3202K32Sourcing PNP0.125UMFCN40 flat cableStandard non-coated base version
BMXDDO3202KC32Sourcing PNP0.125UMFCN40 flat cableConformal coated severe (seu modelo de destino)
BMXDDO6402K64Sourcing PNP0.125UMDual FCN40 flat cableStandard non-coated 64pt
BMXDDO6402KC64Sourcing PNP0.125UMDual FCN40 flat cableConformal coated 64pt severe
  1. Saída de relé (DRA / RDC, Compatível com CA/CC)

Relays suited for AC220V loads; DRC = fast relay, DRA = standard relay

| BMXDRA0804T | 8 | 100~150VAC | Isolated contacts | Modelo legado |

| BMXDRA0805 | 8 | 24CCV / 24~240 VCA | Independent relay | Obsoleto, apenas peças de reposição |

| BMXDRA0805H | 8 | 24CCV / 24~240 VCA | Independent relay | Coated severe |

| BMXDRA0815 | 8 | 24CCV / 24~240 VCA | Independent relay | Regular active model |

| BMXDRA0815H | 8 | 24CCV / 24~240 VCA | Independent relay | Coated severe |

| BMXDRA1605 | 16 | 24CCV / 24~240 VCA | Independent relay | Popular 16pt relay DO |

| BMXDRA1605H | 16 | 24CCV / 24~240 VCA | Independent relay | Coated severe |

| BMXDRC0805 | 8 | 24CCV / 24~240 VCA | High-speed relay | Faster operation |

| BMXDRC0805H | 8 | 24CCV / 24~240 VCA | High-speed relay | Alta velocidade + revestido |

  1. Triac AC Output (DAO, AC loads only)
ModeloPontosAvaliaçãoObservações
BMXDAO16051648~240 VCA, 0.5UMSolid-state AC output, sem contatos, for AC lamps, aquecedores
BMXDAO1605H1648~240 VCA, 0.5UMCoated severe
  1. E/S mista (DI+DO, common for engineering selection)
ModeloDEFAZERTipo de saída
BMXDDM160258DE8FAZERSaída de relé
BMXDDM16025H8DE8FAZERRelé, coated version
BMXDDM3202K16DE16FAZER24VDC sourcing transistor, FCN cable

✅ Quick Selection Cheat Sheet

  1. Direct terminal (20-alfinete): BMXDDO1602 / 1612 série, hardwire directly, no FCN cable needed
  2. FCN flat cable type: 32pt, 64pt (3202K / KC, 6402K / KC), must use BMXFCW/BMXFCC cable + ABE7 terminal block
  3. Difference between C and H

C: PCB conformal coating only, temp 0~60℃ (BMXDDO3202KC)

H: Revestimento isolante + wide temperature -25~70℃ (1602H,1612H, DRAxxH)

  1. Transistor outputs cannot drive AC; relay and DAO triac support AC loads

Anterior:

Próximo:

Deixe uma resposta

Deixe um recado