Contactor,întrerupător de circuit,senzor,Codificator,PLC,Convertor
Banner SBFX1 Fiber Optic Scanner Module (MULTI-BEAM Series)
Nota：SBFX1 is only a scanner block. It does NOT include power module or output module and cannot be powered-up independently. A complete sensor system requires a Power Block plus a Logic Module.
Numărul piesei: 16652, 940 nm infrared light source, high excess-gain fiber amplifier block, supports through-beam and diffuse fiber detection.
Specificații cheie
| Articol | Parametru |
| Model | SBFX1 (MULTI‑BEAM Series) |
| Tip | Fiber‑optic scanner block (integrated transmitter & receptor) |
| Compatible Fiber | Bifurcated fiber or two separate fibers; glass fiber preferred, minimum bundle diameter 0.5 mm |
| Detection Modes | Difuz, traversant (sensing range fully determined by fiber specification) |
| Timp de răspuns | 10 Domnișoară (pornit/oprit) |
| Locuințe | Reinforced VALOX (PBT) incintă, stainless‑steel fasteners |
| Evaluare incintă | NEMA1/3/12/13; IEC IP54 |
| Temperatura de operare | -40℃ ~ +70℃ |
| Indicator | AID alignment red LED; blink frequency indicates received light intensity for fiber alignment assistance |
| Dimensiuni | 114 × 53 × 40 mm |
| Sursă de lumină | Modulated infrared LED 940 nm |
| Țara de origine | STATELE UNITE ALE AMERICII |
Principiul de funcționare & Configuration Instructions
- SBFX1 has no built-in power supply and no output. Complete 3-piece modular assembly:
SBFX1: Scanner block (light transmit/receive + amplification)
Power Block: Provides AC/DC power supply
Logic Module: Select light-on/dark-on, sincronizare, NPN/PNP/relay output
- Fiber Wiring:
Diffuse mode: Connect one bifurcated fiber
Through-beam mode: Connect two separate fibers (one transmit, one receive)
- Beneficii: High excess gain. Stable performance under harsh conditions, high fiber attenuation and small-bundle fiber applications; well-suited for dusty, oily industrial environments.
Nota: For long-range through-beam applications, Banner officially recommends separate SBEXF (transmit) + SBRXF1 (receive) scanner blocks. SBFX1 is not recommended for extra-long through-beam detection.
Aplicații tipice
Object presence detection on machine tools, metallurgical and rubber-plastic equipment under harsh conditions
Narrow-space detection (with 0.5 mm small-bundle fiber heads)
Object sensing in high-temperature, dusty and oily environments
Modernizare & replacement for legacy MULTI-BEAM photoelectric systems
Related Variant Models
SBFX1: Standard 10 ms response scanner block
SBFX1MRM: 5 ms fast-response version, different part number
SBEXF: Transmit-only scanner block; SBRXF1: Receive-only scanner block (for long-range through-beam)
Opțiuni de înlocuire
The original SBFX1 belongs to the legacy Multi-Beam modular series and is phasing out in some supply channels.
Modern Banner drop-in alternatives: DF-G3, DF-G2 all-in-one fiber amplifiers. No stacked power/logic modules required for simpler wiring and setup.
Ghid de depanare
- AID red LED off: Poor fiber connection, broken fiber, or Power Block not installed.
- LED solid ON but no output: Verify Power Block and Logic Module configuration; check light-on / dark-on setting.
- Dim flickering LED: Excessive fiber attenuation or dirty fiber end-faces. Clean fiber tips first.
- For low-temperature installations, confirm temperature rating for the entire assembly including the Power Block.
