Ряд: Modicon X80 (M340 PLC)
Model explanation: BMXDDI3202KH = BMXDDI3202K + ЧАС; H = Conformal Coating version for harsh environments. Electrical specifications are identical to BMXDDI3202K. Only the PCB is coated with conformal coating for moisture-proof, mould-proof and salt-spray resistance, suitable for ports, химические заводы, underground sites, high-humidity and dusty conditions.
✅ Основные характеристики
Тип: 32-channel isolated digital входной модуль, Раковина (положительная логика)
Входное напряжение: 24В постоянного тока, sensor supply range 19~30VDC
Input current per channel: 2.5mA @24V
Логика 1: ≥11V / ≥2mA; Логика 0: ≤5 В / ≤0.5mA
Входное сопротивление: 9600Ой
Время ответа: Typical 4ms, maximum 7ms
Изоляция: Channel-to-channel isolation, сопротивление изоляции >10MΩ at 500VDC
Электропроводка: Совместим с 2-проводным / 3-wire proximity switches (IEC61131-2 Type3, IEC60947-5-2). Input parallel connection is not allowed
Разъем: Single 40-pin FCN interface, одиночный слот, hot-swap supported
Потребляемая мощность: ≤3.9W; Typical backplane 3.3V consumption 121mA
Enclosure protection: IP20
📌 Matching Cables (40-pin FCN)
- BMXFCWxxx3: Pre-wired loose cables (3m/5m/10m: BMXFCW303 / BMXFCW503 / BMXFCW1003)
- BMXFCCxxx3: Pre-assembled HE10 terminal cables (0.5/1/2/3/5/10м)
🧩 Compatible CPUs
Full Modicon M340 series: BMXP34xx00, BMXP34xx20 (including H versions). General X80 rack, configured via Unity Pro software.
⚖️ Model Comparison
БМХДДИ3202К: Стандартная версия, no conformal coating, for conventional control cabinets
BMXDDI3202KH: Conformal coated version for harsh environments. Fully interchangeable in program, pinout and cabling.
📎 Справочник по альтернативному выбору
Same-platform replacement: No drop-in equivalent. For fewer points, refer to BMXDDI1602K(ЧАС) (16-point Sink DI).
Внутренняя замена: Verify sink logic, isolation and filter time, suitable for domestic PLC remote IO modules.
⚠️ Troubleshooting Tips
- Нет входного сигнала: Check 24V supply, sensor polarity (Раковина, signal connects to 0V), broken pins in prefabricated cables.
- Мигает / ложное срабатывание: Check voltage drop and shielding. This module uses fixed hardware filter; filter parameters cannot be modified by software.
- Prefer KH version for humid and corrosive environments; standard K version is prone to PCB corrosion under long-term high humidity.
Шнайдер Цифровой вход (ОТ) Module List by Platform
Примечание: Suffix H = Conformal coating for harsh environments. X80 platform compatible with M340 / M580; Sink = sinking input, Source = sourcing input; AC = AC input.
- Modicon X80 (BMX series, М340 / M580)
Цифровой вход постоянного тока (BMXDDI)
| Модель | Очки | Описание |
| BMXDDI1602K / BMXDDI1602KH | 16 | 24В постоянного тока, Раковина |
| BMXDDI1603K / BMXDDI1603KH | 16 | 48В постоянного тока, Раковина |
| BMXDDI1604T | 16 | 125В постоянного тока, Раковина, широкий диапазон температур |
| БМХДДИ3202К / BMXDDI3202KH | 32 | 24В постоянного тока, Раковина (the model you enquired) |
| BMXDDI3203K / BMXDDI3203KH | 32 | 48В постоянного тока, Раковина |
| BMXDDI3232K / BMXDDI3232KH | 32 | 12/24В постоянного тока, Sink/Source configurable |
| BMXDDI6402K / BMXDDI6402KH | 64 | 24В постоянного тока, Раковина |
AC Digital Input (BMXDAI)
| Модель | Очки | Описание |
| BMXDAI0805 | 8 | 220ВАК |
| BMXDAI0814 | 8 | 100~120VAC |
| BMXDAI1602 | 16 | 24VAC/24VDC, Источник |
| BMXDAI1603 | 16 | 48ВАК |
| BMXDAI1604 | 16 | 100~120VAC |
| BMXDAI1614 | 16 | 220ВАК |
X80 Safety DI (Safety PLC dedicated)
| Модель | Очки | Описание |
| BMXSDI1602 | 16 | Safety digital input, 24В постоянного тока |
- TM3 Series (Expansion for M221/M241/M251/M262 Compact PLC)
| Модель | Очки | Описание |
| ТМ3ДИ8 | 8 | 24В постоянного тока, винтовые клеммы |
| TM3DI8G | 8 | 24В постоянного тока, spring clamp terminals |
| TM3DI8A | 8 | 120ВАК |
| ТМ3ДИ16 | 16 | 24В постоянного тока, винтовые клеммы |
| TM3DI16G | 16 | 24В постоянного тока, spring clamp terminals |
| TM3DI16K | 16 | 24В постоянного тока, HE10 connector |
| TM3DI32K | 32 | 24В постоянного тока, HE10 connector |
- Advantys STB Distributed Remote IO
| Модель | Очки | Описание |
| STBDDI3725 | 16 | 24VDC Sink |
| STBDDI3420 | 8 | 24VDC Sink |
| STBDDI3610 | 4 | 24VDC Sink |
| STBDAI0200 | 2 | 100~240 В переменного тока |
| STBDAI0400 | 4 | 100~240 В переменного тока |
- Дополнительные примечания
- X80 naming rule: `BMXDDI` = DC DI; `BMXDAI` = AC DI; `K` standard, `KH` conformal coated.
- K and KH variants of the same model are fully interchangeable in pinout, programming and backplane interface, only differing in PCB protection.
- Mixed I/O modules (ДИ+ДЕЛО) such as BMXDDM16022 are excluded from this table.
Application Scenarios of Schneider Digital Input (ОТ) Модули (X80/STB/TM3, и т. д.)
Core function of DI modules: Collect binary switch signals, transfer ON/OFF status from external dry contacts, датчики, кнопки, limit switches and auxiliary contacts of contactors to PLC. It only detects on/off status and does not process analog signals. The following is sorted by industry and signal type, applicable to BMXDDI3202KH and other X80 modules.
- General Signal Acquisition (Used across all industries)
- Кнопки, селекторные переключатели, кнопки аварийной остановки
Local cabinet operation, remote control boxes, E-stop signals (general E-stop; safety E-stop should use dedicated safety DI module BMXSDI1602).
- Limit switches, дорожные переключатели, бесконтактные переключатели, фотоэлектрические датчики
Equipment position detection: cylinder confirmation, дверные выключатели, baffle limit for material level, обнаружение присутствия объекта.
BMXDDI3202KH is 24VDC Sink, compatible with mainstream NPN proximity switches.
- Auxiliary contacts of contactors / реле, circuit breaker status feedback
Motor running feedback, VFD ready feedback, circuit breaker open/close status, thermal relay fault signals.
- Dry contact signals
Fire alarm systems, контроль доступа, damper/valve position feedback in HVAC, float level switches.
- ОВК
Бег / fault feedback of fans and water pumps
Реле дифференциального давления, frost protection switches, air damper / water valve end-position feedback
Сигнализация перепада давления на фильтре, high/low float level switches
Feedback of smoke exhaust dampers and fire dampers
Conformal coated KH versions (BMXDDIxxxxKH) are preferred for humid and dusty machine rooms.
- Очистка воды, Водоснабжение & Дренаж, Установки очистки сточных вод
Level switches (высокий уровень, низкий уровень, overflow)
Pump run, вина, hand-auto status
Limit signals for bar screens and sludge scrapers
Pulse signals from flow meters (high-speed pulses require dedicated high-speed counter modules; standard DI is not suitable for high-frequency pulses)
Клапан открыт / обратная связь о закрытом положении
KH coated modules are widely used in corrosive, high-humidity wastewater sites.
- Упаковка, Сборочные линии & Автоматизированные производственные линии
Photoelectric detection for material presence / missing material
Cylinder and clamp confirmation signals
Conveyor belt jam and deviation switches
Barcode detection, silo level switches
Safety gate and guard door status signals
BMXDDI6402K (64-point DI) is commonly used for high-point-count lines to save slots.
- Crane Systems, Транспортировка & Warehouse Logistics
Crane travel limits, upper/lower hard limits, buffer switches
Поддон на месте, bay detection
Roller conveyor deviation and E-stop loop feedback
Roller shutter and guard door status
- Power Distribution Rooms & Energy Monitoring
Circuit breaker and disconnector open/close position feedback for high-voltage cabinets
Cabinet door interlock, earthing switch status
Transformer thermostat switches, cooling fan feedback
DC panel fault alarm dry contacts
BMXDAI AC DI modules are often used for 220VAC cabinet signals.
- Масло & Газ, Химическая промышленность, Порты (Суровые условия)
Обратная связь по положению клапана, pump status, dry contact output of combustible gas detectors
Limit switches and door interlocks for trestle and quay equipment
Salt spray, high humidity and condensation → select KH conformal coated versions (BMXDDI3202KH etc.). Standard K versions are vulnerable to corrosion.
- Автоматизация зданий, Fire Protection & Насосные станции
Dry contact alarms from fire host, sprinkler pressure switches
Elevator interlock signals, smoke exhaust fan status
Rainwater pumps, sump tank level monitoring
✅ Quick Selection Guide by Scenario
Normal indoor control cabinet, сухая среда: BMXDDIxxxK
Химическая / порт / высокая влажность & salt spray: BMXDDIxxxKH (конформное покрытие)
220VAC contact signals: BMXDAI AC DI
Цепи безопасности, защитные ворота, safety E-stop: BMXSDI safety DI
Маленькие машины, low I/O count: TM3DI series
Distributed remote IO with scattered field points: STB Advantys remote DI
⚠️ Scope Limitations (What DI modules cannot do)
- Cannot directly measure 4-20mA or temperature (AI analog modules required)
- Standard DI is not suitable for high-frequency pulse counting (high-speed counter module required)
- Safety functions shall not be implemented via ordinary DI; dedicated safety DI modules are mandatory.
Контактор,автоматический выключатель,датчик,Кодер,ПЛК,Конвертер





















NH42-63-318x560.png)



