CX-75A belongs to the CX Turbo Medium-pressure Centrifugal Blower, المعروف باسم منفاخ توربو متوسط الضغط. العلامات التجارية الشهيرة تشمل Eurostandard, الرياح الكاملة, مانفاك, إلخ. إنه منفاخ من سبائك الألومنيوم مقترن بشكل مباشر بمعايير الصناعة وبقدرة 0.75 كيلووات (1HP).
✅ المواصفات الرئيسية (50Hz Standard)
القوة المقدرة: 0.75 كيلوواط / 750دبليو (1HP)
مزود الطاقة: Single-phase 220V / Three-phase 380V optional
تدفق الهواء: 13 m³/min (780 م³/ساعة); ما يصل الى 15 m³/min at 60Hz
Max Positive Pressure: 2.4 كيلو باسكال (2400 mmH₂O)
Max Negative Pressure: 1.7 كيلو باسكال (1700 mmH₂O)
مدخل & مَنفَذ: Inlet 125mm, Outlet 100mm
مادة: Die-cast aluminum alloy housing + aluminum impeller, محرك مباشر, no belt
فئة الحماية: IP54/IP55, العزل من الفئة F
مستوى الضوضاء: 64~80dB(أ)
الوزن الصافي: تقريبا. 14~17kg (varies slightly by manufacturer)
✅ Structural Features
- Turbo structure, medium pressure with large air volume, different from high-pressure ring blowers.
- Motor and impeller are coaxial direct-coupled, حجم صغير, belt-free maintenance.
- Full die-cast aluminum, lightweight with good heat dissipation; suitable for long continuous operation.
- Sealed maintenance-free bearings, low maintenance under normal working conditions.
✅ التطبيقات النموذجية
Combustion fan for burners, hot air drying, hot air circulation in ovens
النقل الهوائي لمسافة قصيرة للمسحوق/الحبيبات, استخراج الغبار, معدات جامع الغبار
نفخ الهواء للطباعة, الترقق, آلات نفخ وطلاء الأفلام
تبريد المعدات, إمدادات الهواء, النقل الجوي, التهوية البيئية, جمع الغبار النجارة
✅ الاختيار & النقاط الداعمة
البحث عن الكلمات الرئيسية: CX-75A, منفاخ توربو متوسط الضغط, 0.75كيلوواط مروحة الضغط المتوسط
الملحقات الاختيارية: فلتر الهواء, كاتم الصوت, تنظيم المثبط, موصل خرطوم, وسادات قدم ممتصة للصدمات
تثبيت: يوصى باستخدام الموصلات المرنة عند المدخل والمخرج لتقليل انتقال الاهتزاز. يجب تركيب مرشح هواء عند المدخل لمنع الغبار من إتلاف دافع الألومنيوم.
✅ استكشاف الأخطاء وإصلاحها الشائعة
- انخفاض تدفق الهواء: انسداد مرشح المدخل, تسرب الهواء في الأنابيب, تراكم الغبار على المكره
- ارتفاع درجة الحرارة تنطلق: الضغط الزائد, الجهد غير المستقر, منعت مرور تبديد الحرارة
- ضجيج غير طبيعي: تحمل البالية, غلاف فرك المكره, دخول الأجسام الغريبة إلى الغرفة
- Excessive vibration: No shock absorption at base, unbalanced impeller, rigid pipe connection
✅ Comparison within the Same Series (For Alternative Selection)
CX-75SA (0.4كيلوواط) < CX-75A (0.75كيلوواط) < CX-100A (1.5كيلوواط) < CX-125A (2.2كيلوواط)
CX-75A (0.75kW Turbo Medium-pressure Blower) حالات التطبيق
المزايا الأساسية: Medium pressure and large air volume, direct-coupled maintenance-free design. Suitable for blowing/suction applications with pipeline resistance, different from high-pressure ring blowers. Ideal for small & medium equipment and 24-hour continuous operation.
🔥 Case 1: Air Supply for Burners / Small Industrial Furnaces (Classic Application)
حالة العمل: Biomass burners, diesel burners, small incinerators, hot air furnaces for combustion air makeup.
حل: CX-75A delivers stable medium-pressure air to overcome resistance from burner nozzles and filters, ensuring stable oxygen ratio. Three-phase 380V model for continuous operation.
مُكَمِّلات: Inlet air filter, manual air damper for flow adjustment; استخدم الطراز العازل للحرارة CX-75AH لظروف العمل ذات درجة الحرارة العالية لعزل الحرارة المشعة عن الفرن.
النقطة الرئيسية: ضغط الهواء المستقر يمنع اشتعال اللهب; تعتمد العديد من الشعلات الصغيرة المحلية هذا النموذج كمعيار OEM.
🧹 حالة 2: جمع الغبار للنجارة / معالجة الحجر
حالة العمل: استخراج الغبار بمحطة واحدة لأجهزة التوجيه الخشبية الصغيرة باستخدام الحاسب الآلي, ساندرز, المطاحن الحجرية مع صندوق جمع الغبار.
حل: يخلق المنفاخ ضغطًا سلبيًا لاستخراج رقائق الخشب وغبار الكوارتز; يدعم تدفق الهواء بمعدل 13 مترًا مكعبًا/الدقيقة أنابيب الغبار ذات المحطة الواحدة.
ملحوظة: قم بتثبيت الخرطوشة / الفلتر الأساسي عند المدخل لتجنب تآكل دافعة الألومنيوم بسبب الغبار. قم بتقليل الأكواع بمقدار 90 درجة في الأنابيب لتقليل المقاومة.
🧾 حالة 3: تجفيف سكين الهواء للطباعة, الترقق & معدات نفخ الأفلام
حالة العمل: طابعات الملصقات ذاتية اللصق, آلات طلاء, منفاخ الفيلم, طباعة الملصقات, blow off moisture on paper/film surface and assist static elimination.
حل: CX-75A supplies continuous medium-pressure airflow to air knives to blow off ink moisture, accelerate drying and avoid adhesion.
ميزة: Moderate air pressure, will not deform thin paper or film; stable air flow for continuous roll production.
🧪 Case 4: Blow-off for PCB / Glass Washing Lines (صناعة الإلكترونيات)
حالة العمل: Blow residual water after ultrasonic cleaning of PCB etching lines and flat glass.
حل: Air is fed to air knives to remove water droplets from workpiece surface, lower cost compared with high-pressure air compressors.
نصيحة الاختيار: للبيئات الرطبة, adopt moisture-proof motor treatment and install mist filter at air inlet.
🥣 Case 5: Food Machinery · Short-distance Pneumatic Conveying of Powder & حبيبات
حالة العمل: Grain sorting, sugar powder, starch, plastic pellets short-distance conveying (5~10m pipeline), small centralized feeding machine.
حل: Positive pressure pushes granular material to overcome resistance from pipe elbows; stainless steel impeller available for food-grade requirements.
القيد: Only for short-distance and low-concentration conveying; upgrade to CX-100A for long-distance and high powder loading.
💧 Case 6: Aeration for Wastewater Treatment / تربية الأحياء المائية
حالة العمل: Aeration for small biochemical tanks, aquaculture nursery ponds, liquid agitation in electroplating tanks.
حل: The blower delivers air to microporous aeration discs for water oxygenation; medium pressure overcomes water depth and pipeline resistance.
نصيحة: Prioritize three-phase IP55 model in humid environments; air inlet filter prevents catkins and debris from blocking aeration discs.
🌡️ Case 7: Hot Air Circulation for Ovens & Constant Temperature Chambers
حالة العمل: Hot air circulation in small industrial ovens, خزائن التجفيف, المتطابقة مع مولدات الهواء الساخن.
حل: يعمل CX-75A كنافخ دوراني لتدوير الهواء الساخن داخل الحجرة ويضمن توزيعًا موحدًا لدرجة الحرارة.
حالة ارتفاع درجة الحرارة: يجب استخدام CX-75A العازل للحرارة مع لوحة العزل الحراري لتجنب احتراق المحرك الناتج عن توصيل الحرارة.
🛠️ القضية 8: تبريد المعدات & إزالة رقاقة الشغل للأدوات الآلية
حالة العمل: لحام الموجة, إنحسر لحام التبريد, نفخ رقاقة أداة آلة CNC, التبريد المساعد لمعدات الليزر.
حل: تدفق هواء اتجاهي مستمر لتبريد قطع العمل وإزالة غبار القطع المعدنية.
اختيار المبادئ التوجيهية للمفاضلة (الممارسة الصناعية)
- أكواع متعددة ومقاومة عالية للتصفية → منفاخ الضغط المتوسط CX-75A; مقاومة منخفضة تتطلب فقط تدفقًا كبيرًا ← مروحة طرد مركزي متعددة الأجنحة; مطلوب ضغط سلبي عالي ← منفاخ حلقة عالي الضغط.
- مرحلة واحدة 220 فولت للمعدات المستقلة الصغيرة; يوصى باستخدام ثلاث مراحل 380 فولت للتشغيل المستمر الطويل في المصنع.
- للمتربة, الظروف الرطبة أو ارتفاع درجة الحرارة, ترقية الملحقات أو اختيار العزل الحراري / إصدارات مقاومة للتآكل.
نماذج بديلة لتطبيقات مماثلة
انخفاض التدفق: CX-75SA (0.4كيلوواط)
تدفق أعلى: CX-100A (1.5كيلوواط)
استكمال منهجية اختيار المروحة الصناعية (ينطبق على منفاخ CX Turbo, منفاخ الدائري, مراوح الطرد المركزي, النسخة الهندسية)
المنطق الأساسي: تحديد حدود حالة العمل ← حساب تدفق الهواء والضغط ← تحديد نوع المروحة ← التحقق من الوسيط & البيئة → حدد المحرك & المادة → التحقق من هامش الأمان → مطابقة الملحقات
خطوة 1: جمع معلمات حالة العمل الأساسية (شرط أساسي للاختيار)
- طلب: تهب الضغط الإيجابي / شفط الضغط السلبي / دوران الهواء الساخن / نقل هوائي / Aeration / Dust collection
- واسطة: Ambient air / Hot air / Dust-laden air / Moisture/oil mist / Corrosive gas
Clean ambient air: Standard aluminum turbo blower (CX-75A for example)
ارتفاع درجة الحرارة: Heat-insulated turbo blower, high-temperature resistant centrifugal fan (heat insulation plate required to prevent heat transfer to motor)
غبار كثيف: Thickened impeller, pre-filter; heavy dust service: wear-resistant coating or stainless steel impeller
Corrosive gas: FRP / stainless steel housing with anti-corrosion coating
- درجة حرارة متوسطة: المحيطة (≤40℃), درجة حرارة متوسطة (40~180℃), ارتفاع درجة الحرارة (>180℃)
- بيئة: داخلي / في الهواء الطلق, رطب, explosion-proof requirement (Ex-proof motor mandatory for flammable gas/dust)
- وضع التشغيل: Intermittent start-stop / 24h continuous operation (محرك ثلاثي الطور, Class F insulation preferred for continuous duty)
خطوة 2: Calculate Required Air Flow Q (m³/min)
Air Flow = Process Base Flow × Safety Factor
- Source of base process flow:
Dust collection: Air velocity at suction port × cross-sectional area of suction port; recommended suction velocity for dust:18~25m/s
Air knife drying: Cross-sectional area of air knife × designed outlet velocity
نقل هوائي: Air volume for material carrying + pipeline leakage
Combustion air supply: Theoretical air volume calculated by fuel combustion
- عامل الأمان: Normally 1.1~1.3; adopt 1.3 for long pipelines, many elbows and easy filter clogging.
مثال: Process requirement 10m³/min, factor 1.3, selected air flow ≥13m³/min → CX-75A is suitable.
Step3: Calculate Total Pressure P (Pa/kPa)【Most Common Pitfall】
Fan total pressure is used to overcome total system resistance: pipeline resistance + filter resistance + elbows/reducers/valves + internal equipment resistance
- Resistance components:
Friction loss of straight pipe
Local resistance (90° الكوع, tee, reducer, flexible joint, air damper, فلتر)
Equipment internal resistance (burner, خرطوشة الفلتر, air knife, aeration disc)
- قاعدة الاختيار: Fan rated pressure ≥ Total system resistance × 1.1~1.2 margin
Quick comparison of fan categories by pressure range:
| Fan Type | نطاق الضغط | طلب | مثال نموذجي |
| Multi-wing Centrifugal Fan | <1kPa | تدفق كبير, مقاومة منخفضة, oven circulation, general exhaust | Multi-wing centrifugal fan |
| منفاخ توربو متوسط الضغط | 1~10kPa | Medium resistance, dust collection, air knife, combustion air, short-distance conveying | CX Series (CX-75A) |
| Ring Blower | 10~100kPa | High vacuum suction, vacuum feeding, narrow air knife | RB, HG Series |
تذكير مهم: Do NOT select fan only by power rating! For same 0.75kW, ring blower delivers high pressure but low flow; CX-75A features medium pressure and large flow.
Step4: Selection of Fan Structure & Drive Type
- Direct-coupled (CX Series): Motor and impeller coaxial, حجم صغير, خالية من الصيانة, سرعة ثابتة; مناسبة للصغار & medium power and 24h continuous running, CX-75A belongs to this type. عيب: Speed cannot be adjusted without VFD.
- Belt Drive: Speed adjustable via pulley, for larger power; disadvantage: belt periodic replacement, maintenance required.
- محرك اقتران: مراوح الطرد المركزي الصناعية عالية الطاقة لجمع الغبار الكبير والتهوية.
الخطوة5: محرك, مزود الطاقة & اختيار فئة الحماية
- مزود الطاقة:
Single-phase 220V: قوة صغيرة, التشغيل المتقطع للآلة المستقلة
ثلاث مراحل 380 فولت: يفضل للتشغيل المستمر للمصنع, كفاءة أعلى وقدرة تحميل زائدة أفضل
- فئة العزل: يوصى بالفئة F للتشغيل المستمر; الفئة H لارتفاع درجة الحرارة
- فئة الحماية:
IP54: ورشة عمل جافة عادية
IP55: رطب & ورشة مغبرة (شائع لسلسلة CX)
IP65: بيئة الغبار الكثيف ورذاذ الماء
- دليل على الانفجار: مطلوب محرك مقاوم للغبار/الغاز القابل للاشتعال.
الخطوة6: التحقق من حالة العمل (التخلص من النماذج غير المناسبة)
- نقل هوائي: مسافة قصيرة, تركيز منخفض → منفاخ توربو CX; لمسافات طويلة تركيز عال → منفاخ الجذور
- استخراج الغبار الضغط السلبي: إعطاء الأولوية لفحص الضغط السلبي عندما تكون مقاومة خط الأنابيب عالية; الحد الأقصى للضغط السلبي لـ CX-75A هو 1.7 كيلو باسكال, قم بالتبديل إلى منفاخ الحلقة في حالة تجاوزه.
- Hot Air: Standard CX fan cannot be used directly for hot air; heat conduction will burn motor, use CX-H heat-insulated model with heat shield.
- Noise Requirement: Install inlet/outlet silencer, shock pad and flexible joint for noise above 65dB.
Step7: Selection of Auxiliary Accessories (Indispensable for System, Often Neglected)
Inlet side: فلتر الهواء (mandatory for dusty application), كاتم الصوت, vacuum/pressure gauge
Outlet side: كاتم الصوت, check valve (prevent backflow after shutdown), manual/electric damper, flexible canvas joint
قاعدة: Shock-absorbing foot pads to reduce vibration transmission; flexible joint is mandatory for rigid pipe connection to avoid casing crack.
Step8: Simplified Decision Flow Chart for CX-75A Selection
- Process air flow 8~13m³/min, total system resistance 1~2.4kPa
✅ Prefer CX-75A (0.75kW Turbo Medium-pressure Blower)
- Air flow less than 8m³/min, resistance 1~2kPa → CX-75SA (0.4كيلوواط)
- Air flow>13m³/min, resistance 2~3kPa → CX-100A (1.5كيلوواط)
- System resistance>3kPa → Abandon CX turbo blower, select ring blower
- Resistance<1kPa, only large circulation flow required → Multi-wing centrifugal fan
Step9: أخطاء الاختيار الشائعة
- ❌ Select fan only by motor power: Fans with identical power rating have huge difference in air flow and pressure for different types.
- ❌ No resistance margin reserved: Filter clogging increases system resistance in service and leads to insufficient flow.
- ❌ No filter for dusty working conditions, resulting in rapid impeller wear and shortened service life.
- ❌ Use standard CX blower directly for high-temperature air, causing motor burnout by heat conduction.
- ❌ Rigid pipe connection at inlet/outlet, vibration causes casing crack and weld fracture.
Step10: Deliverable List for Fan Selection Document
- Process air flow and total system resistance
- Medium parameters, درجة حرارة, dust condition
- Fan model, operating point on P-Q performance curve (must stay within high-efficiency zone)
- Motor parameters: الجهد االكهربى, قوة, العزل, فئة الحماية, explosion-proof requirement
- مادة, مدخل & outlet dimension
- Accessory list and vibration isolation scheme
CX Turbo Medium-pressure Blower Full Model List (50هرتز, Standard Ambient Model, Same Series as CX-75A)
Suffix Description:
أ: Standard direct-coupled type; ح: High-temperature heat-insulated model (CX-XXAH), fitted with heat shield for hot air service
مزود الطاقة: 1~ Single-phase 220V / 3~ Three-phase 380V; small models support both single & three phase, large models only three-phase
مقاس: IN=Inlet, OUT=Outlet; flow and pressure refer to maximum parameters under 50Hz
| نموذج | قوة(كيلوواط) | Max Air Flow(m鲁/min) | Max Positive Pressure(كيلو باسكال) | Max Negative Pressure(كيلو باسكال) | مدخل & مَنفَذ(مم) | الوزن الصافي(كجم) |
| CX-65A | 0.2 | 4.5 | 1.1 | 0.7 | IN100 / OUT65 | 7 |
| CX-75SA | 0.4 | 7 | 1.6 | 1.1 | IN100 / OUT75 | 10 |
| CX-75A | 0.75 | 13 | 2.4 | 1.7 | IN125 / OUT100 | 14~16 |
| CX-100A | 1.5 | 20 | 3 | 2 | IN125 / OUT100 | 26~28 |
| CX-125A | 2.2 | 32 | 3.7 | 2.4 | IN252 / OUT125 | 36~38 |
| CX-150A | 3.7 | 46 | 4.4 | 3.2 | IN252 / OUT150 | 52~54 |
نماذج درجات الحرارة العالية المشتقة (CX-XXAH, مع درع الحرارة للهواء الساخن / احتراق الفرن)
CX-75SAH (0.4كيلوواط, نسخة درجة الحرارة العالية من CX-75SA)
CX-75AH (0.75كيلوواط, نسخة درجة الحرارة العالية من CX-75A, للفرن والموقد لتزويد الهواء الساخن)
CX-100AH (1.5كيلوواط)
CX-125AH (2.2كيلوواط)
CX-150AH (3.7كيلوواط)
مرجع الاختيار السريع
- CX-65A (0.2كيلوواط): تدفق منخفض ومقاومة منخفضة, تبريد المعدات الصغيرة ونفخ الهواء البسيط
- CX-75SA (0.4كيلوواط): ضربة/شفط منخفضة الطاقة, آلات التسمية الصغيرة, تهوية تربية الأحياء المائية الصغيرة
- CX-75A (0.75كيلوواط): الأكثر تنوعا, إمدادات الهواء الاحتراق, تجفيف سكين الهواء, تجميع الغبار بمحطة واحدة (نموذج الهدف)
- CX-100A (1.5كيلوواط): جمع الغبار بمحطة مزدوجة, سكين الهواء ذو التدفق الكبير, نقل هوائي
- CX-125A (2.2كيلوواط): جامع الغبار متعدد المحطات, دوران الهواء الساخن في الفرن, نقل مسحوق
- CX-150A (3.7كيلوواط): مجموعة كبيرة من الغبار, هواء احتراق الفرن الصناعي, تهوية تدفق كبير
ملاحظات هامة
- نماذج من مختلف الشركات المصنعة (الرياح الكاملة, مانفاك, أوغوان إلخ.) لديها معايير أداء متسقة, اختلاف طفيف في الوزن فقط.
- ارتفاع تدفق الهواء والضغط بنسبة 15% تقريبًا تحت 60 هرتز; تحقق من منحنى الأداء 60 هرتز لمشاريع التصدير.
- هذه السلسلة عبارة عن منفاخ توربو متوسط الضغط, ليست نفس السلسلة مثل منفاخ توربو متعدد المراحل HTB ومنفاخ حلقي عالي الضغط RB, لا تخلط بينهما.
المقاولين,قاطع الدائرة,الاستشعار,التشفير,بلك,محول




















NH42-63-318x560.png)



