Schneider BMXDDO3202KC Digital Output Module - Schütz,Leistungsschalter,Sensor,Encoder,SPS,Konverter

Wechat: +86-13184948252 WhatsApp: 0086-13811255435 E-Mail: kent@bestcontactor.com

Um Kontakt |

 Schneider BMXDDO3202KC Digital Output Module - Schütz,Leistungsschalter,Sensor,Encoder,SPS,Konverter

SPS/

Schneider BMXDDO3202KC Digital Output Module

Serie: Modicon X80 32-point Sourcing Transistor Digital Output Module, Conformal Coated (Severe Environment Version) Corresponding standard non-coated version: BMXDDO3202K ✅ Model Code Explanation BMX: X80 I/O Series DDO: Digital Discrete Output 32: 32 Kanäle 02: 24VDC transistor output K: Sourcing type (Positiv / Current Source) C: Schutzbeschichtung (anti-corrosion, feuchtigkeitsbeständig, dust-proof for severe environments) 📌 ...

  • Produktdetails

Serie: Modicon X80 32-point Sourcing Transistor Digital Ausgabemodul, Conformal Coated (Severe Environment Version)

Corresponding standard non-coated version: BMXDDO3202K

✅ Erklärung des Modellcodes

BMX: X80 I/O Series

DDO: Digital Discrete Output

32: 32 Kanäle

02: 24VDC transistor output

K: Sourcing type (Positiv / Current Source)

C: Schutzbeschichtung (anti-corrosion, feuchtigkeitsbeständig, dust-proof for severe environments)

📌 Core Electrical Specifications

Ausgabetyp: Sourcing transistor (PNP, positive Logik)

Externe Versorgung: 24VDC, range 19~30VDC

Nennstrom pro Kanal: 0.125A (nominal 0.1A)

Maximum total module current: 3.2A

Leckstrom im ausgeschalteten Zustand: ≤0,1 mA

On-state voltage drop: <1.5V

Reaktionszeit des Ausgangs: 1.2MS

Channel parallel connection: Allowed, max. 3 channels in parallel

Stromverbrauch: 3.6W

Backplane 3.3V current draw: Ca. 125mA

Isolierung: 500VDC, insulation resistance >10MΩ

Schutz: Verpolungsschutz, Überspannung, current limiting; 2A external fast fuse recommended for each group against short circuit

Stecker: 1 × 40-pin FCN flat cable connector (no built-in terminal block, requires matched FCN40 cable)

🧱 Mechanisch & Umweltfreundlich

Abmessungen: W32 mm × H100 mm × D86 mm

Nettogewicht: 0.11 kg

Schutzklasse: IP20 (module only, schrankmontiert)

Betriebstemperatur: 0 ~ +60℃ (coated version, suitable for high-humidity, staubig, salt-spray environments)

MTBF: Ca. 290,000 Std.

Zertifizierungen: CE, UL, CSA, UKCA, EAC, RCM, marine classification certification

🤖 PLC Compatibility

Modicon M340 (local rack / X80 remote I/O)

Modicon M580 (local rack / X80 remote I/O, ePAC)

⚠️ Selection Comparison

ModellBeschichtungAusgabetyp
BMXDDO3202KStandard, keine Beschichtung32 × 24VDC sourcing transistor
BMXDDO3202KCSchutzbeschichtung (C)32 × 24VDC sourcing transistor

🛠️ Typische Anwendung & Notizen

  1. Suitable for driving DC24V indicators, small relays, Magnetspulen (observe single-channel current limit)
  2. Wiring only via 40-core FCN flat cable; incompatible with regular terminal bases directly
  3. Transistor output cannot drive AC loads, keine mechanischen Kontakte, not suitable for high-frequency large inductive loads. Freewheeling diode in reverse parallel is mandatory for inductive loads
  4. Coated version for water treatment, Bergbau, Marine, outdoor cabinets and other high-humidity corrosive scenarios
  5. Matched FCN40 Factory Cables

Cables are fully interchangeable between BMXDDO3202KC and BMXDDO3202K, 40-pin Fujitsu FCN connector

1) Flying-lead type (strip wires directly to cabinet terminals)

BMXFCW303: 3M, 40-Kern, pre-stripped colour-coded wires split into 2 Gruppen von 20

BMXFCW503: 5M

BMXFCW1003: 10M

2) With ABE7 Telefast terminal base (HE10 dual connector, most common for engineering)

One BMXDDO3202KC requires 2 pcs of ABE7 16-point bases

BMXFCC053: 0.5M

BMXFCC103: 1M

BMXFCC203: 2M

BMXFCC303: 3M

BMXFCC503: 5M

BMXFCC1003: 10M

Common ABE7 bases for reference:

ABE7H16C10, ABE7R16S111, ABE7R16T111 (16-point sourcing DC output terminal blocks)

Bemerkung: Third-party compatible FCN40 cables (MISUMI, Weidmüller etc.) are available on market. Confirm specs before purchase: Fujitsu FCN-40P male, 0.14mm², 24In DC

  1. I/O Address Mapping (M340/M580, Unity Pro / EcoStruxure Control Expert)

The module occupies 2 output words (%QW), gesamt 32 Bits

Channels Q00~Q15 → %QWx.0 ~ %QWx.15 (1st word)

Channels Q16~Q31 → %QW(x+1).0 ~ %QW(x+1).15 (2nd word)

Automatic rack allocation rule:

M340 local rack: Allocated sequentially by slot after CPU; X80 remote I/O racks follow scanner configuration order.

Channel-level diagnostics supported; Kurzschluss / overload status word can be read in the program.

  1. Pinout Summary (FCN40 connector, PNP sourcing)

1~20: Q00~Q15 outputs + grouped supply SPS+, SPS-

21~40: Q16~Q31 outputs + grouped supply SPS+, SPS-

Module internally divided into 2 independent supply banks of 16 Kanäle jeweils. Independent 2A fast fuse per bank recommended. Für induktive Lasten (Magnetspulen, Relais), connect reverse freewheeling diode (1N4007) across coil terminals.

  1. Checkliste zur Fehlerbehebung
  2. RUN-LED aus

Poor backplane bus contact: Re-seat module, check rack latches; test in alternative slot

Unzureichende Backplane-Leistung; rack power supply undersized

Hardware module damage (coated version less prone to corrosion failure; check backplane first)

  1. RUN LED ON, channel LEDs do not follow program output

Confirm PNP sourcing wiring: Negative terminal of load to 24V-, output provides +24V

Loss of external SPS supply, Sicherung durchgebrannt (failure of half channels usually means fuse blown for that bank)

Wrong program address, forced value or interlock blocking output

  1. Channel LED ON but load not actuated

On-state voltage drop>1.5V: Short circuit at load, burnt channel; measure channel voltage to GND

Leckstrom: Dim glow at OFF state is inherent transistor leakage (≤0,1 mA, common for small indicators)

  1. Repeated channel fault / burnt channels

Missing freewheeling diode for inductive loads, breakdown by back EMF

Single-channel current over 0.125A; total module current exceeds 3.2A limit

Reverse polarity of external 24V supply, high voltage intrusion

  1. Special notes for humid/corrosive environments (KC coated version)

Conformal coating protects PCB only; not resistant to condensation or liquid ingress. Cabinet temperature control and dehumidification required

FCN connector pins vulnerable to salt spray oxidation; apply contact protection spray on connectors

  1. Ersatzoptionen (Same-platform / Domestic PLC replacement)

✅ Direct Schneider Ersatz auf derselben Plattform (no program change, no base modification)

Standardausführung ohne Beschichtung: BMXDDO3202K (only without conformal coating, identische elektrische Parameter)

Warnung: Do not replace KC directly with K for humid / salt-spray / mining environments, service life will be drastically reduced

✅ Domestic alternatives (complete PLC replacement, incompatible with X80 backplane, program migration required)

Selection criteria: 32-point 24VDC PNP sourcing transistor output, 0.1A pro Kanal, with channel diagnostics

Gemeinsame Optionen:

  1. Innovation: AM600 series AM600-32DO (PNP, check revision)
  2. Xinje: XD/XG series 32-point DO module
  3. HCFA: HC-A0/HC-Q series 32-point transistor output
  4. HollySys: LX series 32DO sourcing module

Wichtige Erinnerung: Domestic modules have no FCN40 port, terminal-block design only. If existing FCN wiring harness is retained, domestic modules cannot be used for direct swap; only Schneider X80 applies.

  1. Additional Maintenance Notes

Parallel channels allowed: Max. 3 channels in parallel for higher drive current

Ansprechzeit: 1.2MS, not suitable for high-speed pulse / PWM output

Lagerung: Coated modules resist corrosion, but avoid high temp & humidity for long-term storage; sealed moisture-proof storage recommended

BMXDDO3202KC Full Technical Datasheet (Schneider-Beamter)

Serie: Modicon X80; Typ: 32-point 24VDC sourcing (PNP) transistor digital output module; C = Conformal Coated Severe Environment Version

  1. Grundlegende Informationen

Modell: BMXDDO3202KC

Kompatible CPUs: Modicon M340 / M580 (local rack, X80 remote I/O station)

Anzahl der Kanäle: 32 TUN, split into 2 banks × 16 independent supply domains

Ausgabetyp: Solid-state transistor, Positive Sourcing (PNP)

Standard: EN/IEC 61131-2

Schnittstelle: 40-pin Fujitsu FCN flat cable interface, no built-in terminal block

  1. Electrical Output Ratings

External supply SPS: DC24V, 19V ~ 30V DC

Rated continuous current per channel: 0.1A; aktuelle Grenze: 0.125A

Max total module output current: 3.2A

Leckstrom im ausgeschalteten Zustand: ≤0,1 mA

On-state voltage drop: <1.5V

Reaktionszeit des Ausgangs: 1.2 MS

Parallel channels: Gestattet, max. 3 channels in parallel

Überlastschutz: Built-in current limiting + elektronische Reise, overload range 0.125~0.185A

Kurzschlussschutz: On-board current limiting, external 2A fast fuse required for each 16-channel bank

Überspannungsschutz: Transil transient suppressor diode; reverse protection: reverse diode

Isolierung: 500VDC, insulation resistance>10MΩ

Fault detection threshold: >18V DC = normal; <14V DC = upstream supply fault alarm

Typischer Stromverbrauch: 3.6W

Backplane 3.3V bus consumption: Typical 125mA

  1. Diagnose & Indikatoren

RUN green: Modul fehlerfrei

ERR red: Modulfehler / Busfehler

Independent green LED per channel: Channel status indication

Channel-level diagnostics supported: Kurzschluss, Überlast, external supply loss; fault word readable in CE/Unity Pro

  1. Mechanische Spezifikationen

Abmessungen: W32 mm × H100 mm × D86 mm

Nettogewicht: 0.11 kg

Schutzklasse: IP20 (module only, cabinet use)

PCB treatment: Schutzbeschichtung (Feuchtigkeit, mould and salt spray resistant)

  1. Umweltbewertungen

Betriebstemperatur: 0 ℃ ~ +60 ℃

Lagertemperatur: -40 ℃ ~ +85 ℃

Relative Luftfeuchtigkeit: 5% ~ 95%, nicht kondensierend (coating does not stop condensation or water ingress)

MTBF: 312,254 Std. (reference)

Zertifizierungen: CE, UL, CSA, UKCA, EAC, RCM, Marine-Zertifizierung

  1. Software Address Assignment

Output occupancy: 2 %QW words (QWx, QWx+1), gesamt 32 Bits

Q0~Q15 → QWx bit0~bit15

Q16~Q31 → QWx+1 bit0~bit15

  1. Comparison with Non-coated Sibling Model

BMXDDO3202K: Identical electrical specs, no conformal coating, standard indoor environment only

BMXDDO3202KC: Schutzbeschichtet, for mining, Wasseraufbereitung, Marine, high-humidity salt-spray cabinets

  1. Kritische Einschränkungen (Technischer Schwerpunkt)
  2. Transistorausgang, keine Kontakte, cannot drive AC loads. Freewheeling diode mandatory for inductive loads
  3. Not designed for high-speed pulse / PWM output
  4. Two banks of 16 channels with isolated supplies; blown fuse only impacts that bank of 16 Punkte
  5. Only compatible with FCN40 cables (BMXFCW/BMXFCC series); direct connection to generic terminals not supported

Schneider Modicon X80 (M340/M580) Digital Output DO Module List

Code definition:

DDO: Solid-state DC transistor output; DRA/DRC: Relaisausgang; DAO: Triac AC output

K = Sourcing PNP; 12 = Sinking NPN; C = Conformal coating Severe; H = Wide temp + Schutzbeschichtung; suffix H = severe environment grade

Interface classification: Direct terminal / FCN flat cable (requires ABE7 terminal base + FCW/FCC cable)

  1. DC Transistor Output (BMXDDO Series, 24VDC)
ModellPunkteTypStrom pro KanalSchnittstelleBemerkungen
BMXDDO160216Sourcing PNP0.625A20-pin direct terminalStandard high-current transistor
BMXDDO1602H16Sourcing PNP0.625A20-pin direct terminalWide temp coated severe -25~70℃
BMXDDO161216Sinking NPN0.125A20-pin direct terminalStandard sinking
BMXDDO1612H16Sinking NPN0.125A20-pin direct terminalWide temp coated sinking
BMXDDO3202K32Sourcing PNP0.125AFCN40 flat cableStandard non-coated base version
BMXDDO3202KC32Sourcing PNP0.125AFCN40 flat cableConformal coated severe (Ihr Zielmodell)
BMXDDO6402K64Sourcing PNP0.125ADual FCN40 flat cableStandard non-coated 64pt
BMXDDO6402KC64Sourcing PNP0.125ADual FCN40 flat cableConformal coated 64pt severe
  1. Relaisausgang (DRA / Demokratische Republik Kongo, AC/DC-kompatibel)

Relays suited for AC220V loads; DRC = fast relay, DRA = standard relay

| BMXDRA0804T | 8 | 100~150VAC | Isolated contacts | Legacy model |

| BMXDRA0805 | 8 | 24VDC / 24~240VAC | Independent relay | Veraltet, Nur Ersatzteile |

| BMXDRA0805H | 8 | 24VDC / 24~240VAC | Independent relay | Coated severe |

| BMXDRA0815 | 8 | 24VDC / 24~240VAC | Independent relay | Regular active model |

| BMXDRA0815H | 8 | 24VDC / 24~240VAC | Independent relay | Coated severe |

| BMXDRA1605 | 16 | 24VDC / 24~240VAC | Independent relay | Popular 16pt relay DO |

| BMXDRA1605H | 16 | 24VDC / 24~240VAC | Independent relay | Coated severe |

| BMXDRC0805 | 8 | 24VDC / 24~240VAC | High-speed relay | Faster operation |

| BMXDRC0805H | 8 | 24VDC / 24~240VAC | High-speed relay | Hohe Geschwindigkeit + coated |

  1. Triac AC Output (DAO, AC loads only)
ModellPunkteBewertungBemerkungen
BMXDAO16051648~240VAC, 0.5ASolid-state AC output, keine Kontakte, for AC lamps, Heizungen
BMXDAO1605H1648~240VAC, 0.5ACoated severe
  1. Gemischte E/A (DI+DO, common for engineering selection)
ModellAUSTUNAusgabetyp
BMXDDM160258AUS8TUNRelaisausgang
BMXDDM16025H8AUS8TUNRelais, coated version
BMXDDM3202K16AUS16TUN24VDC sourcing transistor, FCN cable

✅ Quick Selection Cheat Sheet

  1. Direct terminal (20-Stift): BMXDDO1602 / 1612 Serie, hardwire directly, no FCN cable needed
  2. FCN flat cable type: 32pt, 64pt (3202K / KC, 6402K / KC), must use BMXFCW/BMXFCC cable + ABE7 terminal block
  3. Difference between C and H

C: PCB conformal coating only, temp 0~60℃ (BMXDDO3202KC)

H: Schutzbeschichtung + wide temperature -25~70℃ (1602H,1612H, DRAxxH)

  1. Transistor outputs cannot drive AC; relay and DAO triac support AC loads

Vorher:

Nächste:

Hinterlassen Sie eine Antwort

Eine Nachricht hinterlassen