Câble de connexion du capteur IFM EVT002

(Code de commande: ADOGH040VAS0010E04)

Type de produit: M12 straight female socket, 4-pin A-coded, one end molded connector, the other end open wire outlet; hygienic orange PVC sensor cable, designed for wet washdown environments in food & industrie des boissons.

✅ Spécifications clés

Connecteur: M12 straight female, Codé A, 4 épingles, gold-plated contacts

Construction de câbles: 4×0.34 mm², outer diameter Ø4.9 mm, orange PVC jacket

Longueur: 10 m

Tension nominale: AC＜250 V / DC＜300 V

Total rated current: 4 UN

Couple de serrage: 0.6～1.5 Nm

Indice de protection: IP65 / IP67 / IP68 / IP69K (high-pressure washdown capable)

Plage de température: Statique: -25～100 ℃; Moving (drag chain): 5～100 ℃ (cULus certified max. 50 ℃)

Scellage: EPDM; Lock nut: 316L acier inoxydable (1.4404); Molded housing: PVC

Principales caractéristiques: Silicone-free, drag-chain compatible, vibration & shock resistant, mechanical end stop to protect O-rings

Poids: 388.7 g

Standard wire colour (4-cœur): NE (brun), BK (noir), CE (bleu), WH (blanc)

📌 Cross-reference within EVT hygienic series

EVT001: 5 m, otherwise identical to EVT002

EVT002: 10 m, straight female socket (modèle actuel)

EVT004: 5 m, angled female socket

EVT005: 10 m, angled female socket

Series distinction: EVC series = standard black PUR cable; EVT = food-grade orange PVC with EPDM seals & 316L nuts, optimized for washdown stations.

🧩 Typical Applications

Wiring for inductive capteurs, capteurs photoélectriques, pressure/temperature transmitters and IO-Link sensors on food, boisson, dairy and pharmaceutical production lines; adapté au nettoyage CIP/SIP, wet environments and moving drag chain installations.

⚙️ Installation & Directives d'entretien

1. Do not exceed the specified torque; over-tightening will crush the EPDM O-ring.
2. IP69K protection relies on intact sealing; replace the cable immediately if the O-ring is damaged or the housing is cracked.
3. PVC jacket is not suitable for long-term exposure to strong solvents or high-concentration alkaline cleaners. For chemically aggressive media, select EVM series with PUR jacket and FKM seals.
4. Minimum bend radius for drag chain use ≥ 10×cable outer diameter; cycle life 1 millions de cycles, allowable torsion ±180°/m.

📎 Alternative Selection

Original IFM remplacement direct: No direct equivalent; change length by choosing EVT001 / EVT005.

Cross-brand compatible models: Balluff BCC M425-0000-1A08-100, Turck PKG4M-10 (M12 A-code 4-pin straight female, 10 m)

Alternative nationale: M12 A-code 4-pin straight female, 10 m, 0.34 mm², orange PVC, 316L nut, EPDM seal sensor cable.

Main Application Fields of IFM EVT002

EVT002 is a hygienic M12 sensor cable with IP69K high-pressure washdown rating, silicone-free construction, 316L stainless steel lock nut and EPDM sealing. It is primarily designed for wet cleaning stations in the food industry:

1. Nourriture & Boisson (Demande principale)

Dairy, meat processing, bakery, snack food, brewery and beverage production lines; CIP online cleaning, spray zones, convoyeurs, machines de remplissage, packaging equipment and sterilization systems. Used for wiring proximity sensors, capteurs photoélectriques, IO-Link devices, flow and pressure transmitters. Silicone-free construction prevents silicone contamination affecting subsequent painting and sealing processes.

2. Médicaments & Produits de beauté

Wet clean zones for API production, formulation and cosmetic manufacturing; sensor signal wiring under moderate washdown conditions (not for continuous exposure to strong corrosive solvents).

3. Grain & Feed Processing

Convoyage, batching and packaging sections for grain and feed; sensor wiring on conveyors and elevators subject to dust and periodic water washing.

4. Other Wet-Area Automation Scenarios

Small-scale slaughterhouses and seafood processing machinery; also used for drag chain cabling in general automation with high protection and humid conditions (not recommended for continuous immersion in strong acid/alkali).

Compatible Devices

M12 A-coded 4-pin sensors: détecteurs de proximité, capteurs photoélectriques, pression, température, flow and IO-Link signal sensors.

Selection Boundary Reminders

The orange PVC jacket cannot withstand prolonged exposure to strong chemicals or high-alkaline cleaning agents. For chemically aggressive environments, select EVM series with PUR jacket and FKM seals.

Fully rated for drag chain movement, ideal for moving cabling on conveyors and reciprocating machinery.

EVT series = food-grade orange PVC cable; M12 A-code, 4 noyaux, 316L stainless steel nuts, EPDM seals, IP69K, sans silicone, drag-chain compatible. Below is the full model list: ① Basic EVT001/002/004/005 (female socket, open wire); ② LED versions, male connectors, M8 types and shielded variants.

1. Basic EVT00x Models (M12 4-pin female, one molded end + open wire, orange PVC)

1. Other Common Models in EVT Series

1) Male Connector Cables (M12 4-pin male, open wire)

EVT326: Straight male, 5 m

EVT327: Angled male, 10 m

2) M8 Small Hygienic Cables (3-cœur)

EVT155: M8 male-to-female short jumper

3) Shielded Versions (5-cœur, anti-interference for food lines)

EVT381～EVT399, EVT400～EVT411 (M12 5-core shielded, orange PVC, IP69K)

4) Y-Distribution Cables (1-to-2 splitter)

EVT329: M12 1 male to 2 femelle, 1 m, hygienic Y-cable

III. Règles de dénomination des modèles

1. Suffixe 1/2 = straight connector; suffixe 4/5 = angled connector
2. Suffixe 1/4 = 5 m de longueur; suffixe 2/5 = 10 m de longueur
3. EVT = orange PVC food grade; EVC = standard black PUR; EVM = chemical-resistant PUR; EVF = highly resistant MPPE.
4. Unified Technical Parameters (EVT001~005)

Conducteur: 4×0.34 mm², outer diameter Ø4.9 mm, orange PVC

Scellage: EPDM; Nut: 316L acier inoxydable; Gold-plated contacts

Protection: IP67/IP68/IP69K; Silicone-free; Drag chain suitable

Tension: AC250V / DC300V; Actuel: 4 UN

IFM EVT Series · M8 Hygienic Cable List

(Orange PVC, food grade, IP69K, 316L stainless steel nut, sans silicone, drag-chain compatible)

All A-coded M8, split into three categories: M8↔M8 jumper, M8↔M12 adapter cable, single-ended molded M8 (one M8 connector + open wire)

1. M8 ↔ M8 Jumper Cables (3-cœur)

1. M8 ↔ M8 Jumper Cables (4-cœur)

III. M8 ↔ M12 Adapter Cables (M12 sensor to M8 module conversion)

1. Single-Ended M8 Molded Cables (one M8 connector + open wire, same structure as EVT002)

✅ Universal M8 EVT Specifications (Consistent with EVT002)

Jacket: Orange PVC, sans silicone, drag-chain compatible

Lock nut: 316L (1.4404) acier inoxydable

Indice de protection: IP67 / IP68 / IP69K, high-pressure washdown approved

Couple de serrage: 0.3～0.5 Nm

3-core version: 3×0.34 mm², maximum. 3 UN

4-core version: 4×0.34 mm², maximum. 4 UN

📌 Selection Tips

1. EVT154~157: With LED power indicator, ideal for commissioning on food production lines.
2. EVT164/165: No LED, moindre coût.
3. EVT270/271/272/274/275: Single-ended open wire type, same application logic as EVT002, only with M8 connector instead of M12.
4. EVT251 & EVT261: M12-to-M8 adapters, used to connect legacy M12 sensors to M8 IO-Link masters.