Numéro de modèle Siemens 6SL3210-1KE23-2UF1

The product with the Siemens model number 6SL3210-1KE23-2UF1 belongs to the SINAMICS G120C Series of integrated frequency converters, which are primarily used for speed control and energy-efficient operation of three-phase AC motors. The following is a summary of the key information:

1. Paramètres techniques de base
2. Power and Voltage

– Nominal Power: 15.0 kW

– Tension d'entrée: 380-480V (±10%/-20%), three-phase alternating current

– Capacité de surcharge: 150% surcharge pour 3 secondes.

2. Interfaces and Communication

– Integrated PROFINET interface supporting industrial Ethernet communication.

– Configuration des E/S: 6 entrées numériques (DEPUIS), 2 sorties numériques (FAIRE), 1 entrée analogique (IA), 1 sortie analogique (AU).

– For RS485 or DP interfaces, other models need to be selected (par ex., 6SL3210-1KE23-2UB1 supports USS/MODBUS, and 6SL3210-1KE23-2UP1 supports DP).

3. Caractéristiques physiques:

– Classe de protection: IP20 (suitable for installation inside control cabinets).

– Dimensions: 295×140×225.4 mm (hauteur × largeur × profondeur), supports side-by-side installation without derating.

– Built-in filter complies with EN 61800-3 C2 standard (Classe A).

1. Scénarios d'application

Industrial Manufacturing: Used for motor control of equipment such as conveyor belts, mélangeurs, and extruders.

Building and Building Automation: Suitable for energy-efficient speed regulation of elevators, systèmes de climatisation, and water pumps.

Gestion de l'énergie: Optimizes the operational efficiency of fans and compressors, réduire la consommation d'énergie.

III. Supply and Procurement

Spot Supply: Inventory is still available in the market in 2025. Par exemple, Hebei China Electric can deliver within 3 jours, with a total supply of 1,000 unités.

1. Installation and Commissioning
2. Points clés de l'installation

– Shielding plates and EMC connection strips need to be installed to ensure electromagnetic compatibility. The built-in filter model should be selected according to actual requirements.

– Power and motor connection terminals are pluggable, and the radiator fan can be easily replaced.

1. Problèmes courants et maintenance
2. Gestion des défauts

Overvoltage Alarm (par ex., F0002): Check if the power supply voltage is within the allowable range (P0210), adjust the ramp-down time (P1121), or add a braking unit.

Communication Interface Issues: Select the correct model according to requirements (par ex., PROFINET, DP, or RS485) to avoid compatibility issues caused by mixing.

2. Recommandations d'entretien

– Regularly inspect the power supply board and power modules to prevent strong electrical interference with weak electrical circuits.

– Assurer une bonne dissipation de la chaleur, with the ambient temperature not exceeding 55°C (PROFINET models support side-by-side installation).

1. Modèles alternatifs et mises à niveau

Communication Requirement Changes: For a DP interface, select 6SL3210-1KE23-2UP1; for RS485, select 6SL3210-1KE23-2UB1.

Extension des fonctions: For higher performance, consider the SINAMICS G120 modular frequency converter, which supports flexible configuration of control units and power modules.

VII. Official Support and Documentation

Documentation technique: Detailed user manuals and parameter setting guides are available on the Siemens official website and can be obtained by searching for “6SL3210-1KE23-2UF1”.

Service après-vente: Agents and the Siemens technical support team can provide installation guidance, firmware updates, and fault troubleshooting services.

It is recommended to confirm specific application requirements (such as communication protocols and environmental conditions) before procurement and contact the supplier for the latest quotations and technical support.

Spécifications techniques

1. Paramètres de base

Modèle: 6SL3210-1KE23-2UF1

Série: SINAMICS G120C Integrated Frequency Converter

Plage de puissance: 15.0 kW

Tension d'alimentation: 3AC 380-480V (-20%/+10%)

Gamme de fréquences: 47-63 Hz

Type de contrôle: Contrôle vectoriel (Capital-risque) / Vector Control with Encoder (VC+PG) / Contrôle V/F

Classe de protection: IP20

Méthode de refroidissement: Refroidissement par air forcé

Dimensions: A4 (295 x 140 x 225.4 mm)

2. Indicateurs de performance

Capacité de surcharge:

– Modèle standard: 150% du courant nominal pour 60 secondes

– Enhanced Type: 180% du courant nominal pour 3 secondes

Fréquence de commutation: 2-16 kHz (défaut 8 kHz)

Speed Regulation Range:

– VC Control: 1:100

– VC+PG Control: 1:1000

Speed Accuracy:

– VC Control: ±0,5%

– VC+PG Control: ±0.01%

3. Input/Output Interfaces

Entrées numériques: 6 chaînes (default DI1-DI6), configurable as NPN/PNP

Sorties numériques: 2 chaînes (DO1-DO2), sorties relais

Entrée analogique: 1 canal (AI1: 0-10V/0-20mA)

Sortie analogique: 1 canal (AO1: 0-20mA/0-10V)

Encoder Interface: Supports SIN/COS, TTL encoders

Interfaces de communication:

– Integrated PROFINET interface (RT/IRT)

– Optional CBP2 board (Profibus-DP) or other communication expansion boards

4. Power Supply and Power Consumption

Puissance d'entrée:

– Main Power: 3AC 380-480V, 50/60Hz

– Puissance de contrôle: 24VCC (built-in)

Consommation d'énergie: Approximately 150W

Efficacité: ≥98%

5. Conditions environnementales

Température de fonctionnement: -10°C à +50°C (derating required above 40°C)

Température de stockage: -25°C à +70°C

Humidité: ≤95%, sans condensation

Altitude: ≤1000m (derating required above)

Degré de pollution: Classe 2

Caractéristiques fonctionnelles

1. Fonctions de contrôle

Modes de contrôle:

– Contrôle vectoriel (Capital-risque)

– Vector Control with Encoder (VC+PG)

– Contrôle V/F (linear/square)

Speed Control: Supports PID control, closed-loop speed control

Contrôle du couple: Supports Direct Torque Control (DTC)

Positioning Function: Simple positioning (jusqu'à 16 position points)

2. Fonctions de protection

Protection contre les surcharges: Electronic thermal overload protection (PTC/KTY84 optional)

Overvoltage/Undervoltage Protection: Automatic Voltage Regulation (AVR)

Protection contre les courts-circuits: Dual hardware and software protection

Protection contre les défauts à la terre: Built-in ground fault detection

Protection du moteur: Stalling protection, stall prevention, underload protection

3. Communication Functions

PROFINET:

– Supports RT/IRT real-time communication

– Supports SINAMICS drive basic parameter file (GSDML)

– Allows parameter setting and monitoring via PROFINET

Expanded Communication:

– Supports Profibus DP via CBP2 board

– Supports Modbus TCP via CM AC board

– Supports Ethernet/IP, CANopen, etc.. via other expansion boards

4. Operation and Monitoring

Panneau de commande:

– Basic Operation Panel BOP-2 (with 7-segment LED display)

– Advanced Operation Panel AOP-30 (with LCD graphic display)

Paramétrage:

– Set via the operation panel

– Use STARTER or StartDrive software via PC

– Remote setting via communication interface

Monitoring Functions:

– Real-time monitoring of parameters such as current, tension, fréquence, et le pouvoir

– Fault diagnosis and alarm recording (stores up to 100 fault messages)

5. Fonctions spéciales

Energy-Saving Mode: Automatically optimizes the V/f curve to reduce no-load losses

Quick Commissioning Wizard: Simplifies the initial setup process

Ramp Function Generator: Supports S-curve and multi-speed control

Braking Function: Built-in braking chopper, supports dynamic braking

Fonctions de sécurité:

– Coupure sûre du couple (STO) – Complies with SIL3/PLe

– Optional safety expansion board supports SS1, SS2, SBC, etc..

6. Macros d'applications

– Built-in multiple application macros to simplify parameter setting:

– Pump and Fan Macro

– Conveyor Belt Macro

– Hoist Macro

– Compressor Macro

– Custom Macro

7. Installation et entretien

Méthode d'installation: Wall-mounted installation

Side-by-Side Installation: Supports installation without spacing (requires EMC shielding plate)

Conception modulaire:

– Separate control unit and power unit

– Easy replacement of vulnerable parts (les fans, condensateurs)

Mise à niveau du micrologiciel: Supports firmware updates via USB or communication interface

Applications typiques

– Energy-efficient control of pump and fan loads

– Speed control of conveyor belts and conveying systems

– Precise control of mixers and mixing equipment

– Constant torque control of extruders and compressors

– Speed regulation of elevators and lifting equipment