Frein de servomoteur Siemens 8661108T01

No official detailed technical parameters or product information of Servomoteur Siemens Brake 8661108T01 has been found so far. This model has no clear records in Siemens’ official product catalogs, documents techniques, ou canaux de revendeurs agréés.

Analysis of Possible Scenarios

1. Non-standard Model: Ce modèle peut être un produit personnalisé spécifique au projet, un produit en lot spécial, or a regional product that is not included in Siemens’ standard product lineup.
2. Spare Part or Replacement Part: It may be a component or repair spare part of the servo motor brake system, rather than a complete product sold independently.
3. Model Nomenclature Discrepancy:

– Standard Siemens servo motor brakes are usually bound to the motor model instead of having independent part numbers.

– Standard naming example: 1FK7084-2AC71-1AA0 (avec frein), distinguished by the suffix letters of the order number.

– Some brake components may adopt “Z + numbers” as option codes, par ex., “-ZF70” (avec frein).

General Characteristics of Siemens Servo Motor Brake Systems

Principe de fonctionnement

– Frein électromagnétique, released when energized and engaged when de-energized.

– Prevents unintended movement of the motor caused by gravity or external forces after power-off.

– Commonly used in applications with high safety requirements such as vertical axes and lifting mechanisms.

Typical Parameters

– Tension de fonctionnement: Normally 24V DC (±10%)

– Operating Current: ≤0.6A

– Holding Torque: ≥12Nm (varies with motor specifications)

– Temps de réponse: Adjustable via the drive parameter (p1216)

Méthode de câblage

V90 Series: The brake interface (X7) is integrated on the front panel of the drive.

Other Series: Connected to the drive via a dedicated connector.