オムロン GX-ILM08C マスターユニット - コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ

微信: +86-13184948252 ワッツアップ: 0086-13811255435 電子メール: kent@bestcontactor.com

について 接触 |

オムロン GX-ILM08C マスターユニット - コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ

PLC/

オムロン GX-ILM08C マスターユニット

フルネーム: GX-series EtherCAT IO-Link Master Unit (IP67 Field Type) コアの位置決め: EtherCATバス, 8-channel IO-Link master, M12 A-coding female connector. 防塵・防水, can be mounted directly on equipment frames or production lines without installation inside control cabinets. ✅ Key Specifications Number of ports: 8 IO-Link ports (M12 A-coding female) Bus interface: EtherCAT (IN/OUT ...

  • 製品詳細

フルネーム: GX-series EtherCAT IO-Link Master Unit (IP67 Field Type)

コアの位置決め: EtherCATバス, 8-channel IO-Link master, M12 A-coding female connector. 防塵・防水, can be mounted directly on equipment frames or production lines without installation inside control cabinets.

✅ 主な仕様

Number of ports: 8 IO-Link ports (M12 A-coding female)

Bus interface: EtherCAT (IN/OUT M12, supports daisy-chain connection)

IO-Linkのバージョン: V1.1.2

ボーレート: COM1 (4.8k) / COM2 (38.4k) / COM3 (230.4k) auto-adaptive

Power supply per port: DC24V, 最大. 200mA per port, with independent short-circuit protection

SIO compatible mode: Switchable to PNP DI / PNP DO

から: ON ≥15V, OFF ≤5V; multi-stage filter time optional (工場出荷時のデフォルト: 1MS)

する: Push-pull output, 0.3チャンネルごとに

Power supply range: DC20.4~26.4V (24V ±10%/-15%)

保護クラス: IP67 (suitable for dusty and humid field environments)

Configuration software: シスマックスタジオ, CX-ConfiguratorFDT

対応PLC: NX/NJ/NY series EtherCAT controllers

✅ Main Features

  1. IP67 field mounting, saves junction boxes, adopts M12 Smartclick quick connectors
  2. 8 independent IO-Link master ports. Each port can connect IO-Link sensors, バルブアイランド, analog modules, RFID and other smart slaves
  3. Flexible port mode switching: IO-Link smart mode / SIO digital DI / SIO digital DO
  4. EtherCAT daisy-chain, simple networking. Diagnostic information (sensor temperature, signal quality, event alarms) can be uploaded to PLC
  5. Supports automatic upload, download and backup of IO-Link device parameters. No manual setting required after sensor replacement

✅ Similar Series & 代替リファレンス

GX-ILM04C: 4-port version (same architecture IP67 EtherCAT IO-Link master)

NX-ILM08C: NX backplane type (キャビネット取り付け型, non-IP67), 混乱しないでください

✅ Typical Application Scenarios

組立ライン, 包装機, 工作機械, material handling lines, for mass connection of IO-Link photoelectric sensors, proximity sensors, 圧力センサー, flow sensors, proportional valves and IO-Link hubs.

✅ Notes

EtherCAT cables shall be CAT5e or higher grade shielded STP cable;

SIO DO is PNP push-pull output, cannot directly drive heavy loads;

All ports share 24V power supply, with independent short-circuit protection for each port.

GX‑ILM08C’s core advantages: IP67 field-side installation, EtherCAT daisy-chain, 8-channel IO‑Link, ports compatible with ordinary DI/DO. It is designed for outside control cabinets, dusty and humid production lines, and differentiated from NX‑ILM08C (IP20 for cabinet installation).

  1. 典型的な業界アプリケーション
  2. Automotive component assembly lines, 治具, ロボットワークステーション

Connected to IO-Link proximity sensors, 光電センサー, cylinder magnetic switches, 圧力センサー, proportional valves, fixture in-place sensors.

利点: Modules can be mounted beside tooling without routing cables back to cabinet junction boxes; sensor temperature, signal margin and offset data can be read for predictive maintenance. Parameters can be downloaded automatically during fixture changeover to shorten product change time.

  1. 包装機械 (フローラッパー, ケースパッカー, palletizers)

For photoelectric detection, material level, プレッシャー, web guiding sensors and IO-Link valve islands. IP67 rating fits oily and humid conditions. Ordinary PNP sensors can be used in SIO mode, friendly for retrofitting projects mixing old and new sensors.

  1. Material handling lines, 行を並べ替える, 自動倉庫, AGV stations

Position detection, code-reading trigger and photoelectric sensors for belt conveyors, roller lines and transfer units. Long-distance segmented EtherCAT daisy-chain wiring. 断線, short circuit and sensor disconnection alarms are sent to PLC for fast fault location and reduced downtime.

  1. 工作機械, stamping and injection molding equipment

Peripheral detection of machine tools, セーフティライトカーテン, mold confirmation, mold pressure, cooling circuit flow and temperature. Resists cutting fluid and dust. Sensor degradation data can be collected for early warning to avoid defective batches.

  1. 食べ物 & pharmaceutical production lines (wash-down environments)

IP67 protection and M12 quick connectors for wash applications. Connected to sanitary IO-Link flow, temperature and level sensors. Supports sensor ID verification to prevent wrong installation.

  1. リチウム電池 & photovoltaic equipment (液体注入, lamination, 並べ替え)

Centralized access of large numbers of small-point smart sensors. Sensor parameters can be backed up and restored with one click; no on-site commissioning required when replacing sensors in batches. Status data can be uploaded to SCADA for OEE analysis.

  1. Functional Use Cases

センサー condition visualization & 予知保全: Monitor photoelectric received light intensity, sensor temperature, vibration and pressure, set threshold alarms before total failure.

Production line retrofitting: Expand I/O points locally on site without adding new control cabinets. Legacy sensors use SIO DI/DO while new smart sensors run IO-Link.

Flexible multi-product production lines: Automatic parameter download for product changeover, automatic sensor identification and anti-mismatch function.

Distributed I/O architecture: Multiple scattered acquisition points on one line connected via EtherCAT chain, reducing heavy multi-core cables.

Ⅲ. 不適切なシナリオ

Cabinet internal installation with compact backplane requirement: choose NX‑ILM08C

High corrosion or continuous immersion conditions (only IP67, not for long-term submersion)

High-current loads per channel (最大. 0.3A for DO ports)

  1. Matching Configuration

コントローラ: NX/NJ/NY series EtherCAT PLC; ソフトウェア: シスマックスタジオ; Networking: Multiple GX modules daisy-chained with STP shielded EtherCAT cables.

オムロン GX-series IO-Link Master Units

✅ GX series only has one official IO-Link master model: GX-ILM08C. GX-ILM04C does not exist; the 4-port field IO-Link master does not belong to the GX series.

モデルポート保護バスインタフェース説明
GX-ILM08C8 IOリンクIP67EtherCATM12 A-coding female (IOリンク); M12 D-coding (EtherCAT IN/OUT)Field distributed I/O, M12 quick connect, port switchable SIO DI/DO, compatible with NX/NJ/NY EtherCAT controllers

Confusable IO-Link Masters from Related Families (Not GX series)

モデルシリーズポート保護バス工事
NX-ILM400NX4IP20EtherCATCabinet backplane mounting, ネジ端子, for indoor cabinet use
NXR-ILM08C-ECTNXR8IP67EtherCATRugged remote terminal, similar form factor to GX
NXR-ILM08C-EITNXR8IP67イーサネット/IPEtherNet/IP version, not EtherCAT

Additional GX-series EtherCAT Remote I/O Modules (Not IO-Link Masters)

GX is Omron’s large IP67 EtherCAT remote I/O family. Besides IO-Link master, it includes digital and analog modules:

GX-ID16□2 / OD16□2 / MD16□2: 3-tier terminal digital I/O

GX-□D16□1 / OC1601: 2-tier terminal digital I/O

GX-□D16□8 / □D32□8: e-CON connector digital I/O

GX-AD0471 / DA0271: アナログ入力 / アナログ出力

GX-EC0211 / EC0241: EtherCAT junction / branch units

GX-JC03 / JC06: Extension connectors

前へ:

次:

返信を残す

伝言を残す