ABB 2UEA001345 Phase Module Kit - 접촉기,회로 차단기,태양광 인버터,전기 계량기,태양 전지

위챗: +86-13184948252 왓츠앱: 0086-13811255435 이메일: kent@bestcontactor.com

에 대한 연락하다 |

ABB 2UEA001345 Phase Module Kit - 접촉기,회로 차단기,태양광 인버터,전기 계량기,태양 전지

소식무역 뉴스

ABB 2UEA001345 Phase Module Kit

씨줄 2UEA001345 (ACS 2040-PMK1000) 4kV Phase Module Kit

ABB 2UEA001345 is a dedicated phase module kit for ACS 2040 series 4kV medium-voltage frequency converters. It serves as the core power unit of the ACS2000 medium-voltage drive system, adopting 3-level IGBT topology. It is applicable to 4kV power grid systems with rated power ranging from 300-1000HP (225-750kW).

Its core strengths include high-reliability design (MTBF>100,000 hours), 낮은 고조파 출력 (compliant with IEEE 519 기준), modular structure for easy maintenance and replacement, and wide operating temperature range (-10℃ ~ +40℃). It is perfectly suited for general industrial loads such as fans, 워터 펌프 및 압축기, which can effectively improve system energy efficiency (20%-40% 에너지 절약) and reduce maintenance costs.

  1. 모델 코드 설명
부분암호정의
제품 시리즈2UEASeries code for ABB medium-voltage inverter power modules (2UEA=ACS 2040 시리즈, 2UEB=ACS 2000 시리즈)
부품 번호1345Unique identification code of phase module kit, 모델 ACS 2040-PMK1000에 해당
Applicable Voltage4kVMatches 4000V medium-voltage power grid system
제품 유형PMK1000Phase Module Kit, 정격 전류: 1000에이
적용 가능한 시스템ACS 2040Compatible with ABB ACS 2040 series medium-voltage inverters

주문 번호: 2UEA001345 (Standard single packing)

Matching Model: 2UEA001141 (Complementary phase module of the same series)

  1. Main Technical Specifications
범주매개변수비고
기본정보제품 유형4kV Medium Voltage Inverter Phase Module Kit3-level IGBT topology, integrated drive and protection circuits
Applicable InverterACS 2040 시리즈 (ACS2000 Platform)Compatible with Frame 1 크기 (300-1000HP)
정격전압4kV (4000다섯)작동 전압 범위: 3.6~4.4kV
정격전류1000에이Max peak current: 2000에이 (2 times rated value)
Power DevicesIGBT TypeHigh-voltage IGBT Module1700V/1200A, ABB customized version
토폴로지3-level NPC (Neutral Point Clamped)Reduce dv/dt and motor insulation stress
Cooling Mode강제 공기 냉각냉각팬 내장, redundant design supported
전기적 매개변수Input Frequency50/60헤르츠, ±5%Compatible with global power grid standards
스위칭 주파수2~8kHz (조절할 수 있는)Balance energy efficiency and noise performance
전력 손실대략. 1.2kW per moduleUnder typical working conditions
절연 등급Overvoltage Category IV (IEC 60664)Meet insulation requirements of medium-voltage systems
기계적 매개변수차원 (L×W×H)650×450×320mmStandard Frame 1 크기
순중량48.5kgExcluding packaging
보호 등급IP20Suitable for cabinet installation
보호 기능과전류 보호2000에이 (2 times rated)Short-circuit response time <10μs
과전압 보호4.4kVDC bus overvoltage protection
Over-temperature Protection100℃IGBT module overtemperature protection
저전압 보호3.6kVGrid undervoltage protection
인증 & 규정 준수CE CertificateEN 준수 61800-5-1
UL CertificateMeet North American medium-voltage equipment standards
IEEE 519 규정 준수Total harmonic distortion <5%
  1. Full Model List of ACS 2040 Series Phase Modules
모델주문 번호.정격전압정격전류Applicable Inverter메모
ACS 2040-PMK10002UEA0013454kV1000에이ACS 2040 액자 1Standard phase module
ACS 2040-PMK10002UEA0011414kV1000에이ACS 2040 액자 1Complementary phase module
ACS 2040-PMK12002UEA0013464kV1200에이ACS 2040 액자 1High current version
ACS 2040-PMK8002UEA0013474kV800에이ACS 2040 액자 1Low current version
ACS 2040-PMK1000-6kV2UEA0013486kV1000에이ACS 2040 액자 26kV dedicated version
  1. 대사 & Equivalent Models

4.1 Internal ABB Replacement

구형 모델New Model교체 설명
ACS 1040-PMK1000ACS 2040-PMK1000 (2UEA001345)Upgraded to 3-level topology, efficiency increased by 2%, harmonic distortion reduced by 30%
ACS 2040-PMK800 (2UEA001347)ACS 2040-PMK1000 (2UEA001345)Higher current model in the same series, wider power coverage

4.2 Cross-brand Equivalent Products

상표동등한 모델장점
지멘스SINAMICS GM150 Power ModuleSuperior 3-level topology, lower dv/dt, better motor insulation protection
슈나이더 일렉트릭알티바르 6100 Medium Voltage ModuleEasier maintenance with modular design, higher MTBF (>100,000 hours)
미쓰비시전기MV-VFD Power ModuleWider applicable voltage range (3.6-4.4kV), stronger environmental adaptability
  1. 응용 시나리오 & 산업 사례

5.1 권장 애플리케이션

애플리케이션 유형Typical Working Conditions핵심 장점
Industrial FansPower plant induced draft fans, cement plant kiln fans, steel plant dust removal fansWide speed regulation range (0.1-100헤르츠), 30%-40% 에너지 절약
Industrial Water PumpsWater plant high-pressure water supply pumps, mine drainage pumps, petrochemical circulating pumpsSoft start without impact, reduce pipeline stress and extend service life
압축기공기 압축기, natural gas compressors, 냉동 압축기Precise pressure control, reduce no-load loss and improve energy efficiency
컨베이어Long-distance mine conveyors, port container conveyorsSmooth speed regulation, avoid material accumulation and mechanical wear
General Industrial Equipment믹서, 파쇄기, 압출기, 등.Modular design for convenient maintenance, MTBF>100,000 hours

5.2 Not Recommended Usage Scenarios

Explosion-proof areas (non-explosion-proof structure, customized version required)

해양 플랫폼 (additional anti-corrosion treatment needed)

Ultra-high voltage systems above 4.4kV (select 6kV version instead)

Equipment with frequent start-stop operations (more than 10 시간당 횟수, special customized modules recommended)

5.3 Practical Cases

사례 1: Induced Draft Fan Renovation in Thermal Power Plant

Original system: Fixed-speed motor + baffle adjustment, high energy consumption and severe baffle wear

Renovation solution: ACS 2040 인버터 + 3 sets of 2UEA001345 phase modules (3-단계)

Effect: Energy consumption reduced by 38%, annual electricity cost saved about 1.8 million RMB, baffle maintenance cycle extended 5 타임스

사례 2: High-pressure Water Supply System for Large Water Plant

수요: Constant pressure water supply with large load fluctuation (20%-100%)

해결책: ACS 2040 액자 1 (3 pcs 2UEA001345 modules) + PID control system

Effect: Stable pressure deviation within ±0.05MPa, 32% 에너지 절약, service life extended by 3 연령

  1. Air Shipment Compliance & Certification Guide

6.1 Shipment Compliance Confirmation

상태설명
Built-in Lithium Battery아니요Only electronic components and IGBT modules equipped
Dangerous Goods ClassificationNon-dangerous goodsCompliant with IATA DGR Class 9, no special shipping restrictions
Transport Restrictions없음Can be shipped as ordinary industrial equipment
Packaging StandardStandard shockproof packageFix IGBT modules firmly to avoid damage during transit
온도 범위-20℃ ~ +50℃Avoid extreme temperature during transportation

6.2 Certification Document Acquisition

CE Certificate: Available for download on official ABB website (Document ID: ACS2000-PHTC01U-EN)

UL Certificate: Apply via ABB global technical support center

Manufacturer Declaration: Including EMC, safety and RoHS compliance statements

  1. 선택 지침 & Quick Rules

선택 규칙

  1. 전압 매칭: 2UEA001345 for 4kV systems; choose 2UEA001348 for 6kV systems
  2. 현재 선택: 1000A standard (PMK1000), 800A low current (PMK800), 1200높은 전류 (PMK1200)
  3. 시스템 호환성: Only applicable to ACS 2040 시리즈 (ACS2000 platform) 액자 1 크기
  4. Quantity Matching: 3 phase modules required for one 3-phase inverter, 1 spare module is recommended
  5. 유지 관리 팁: Regularly inspect cooling fans, replace IGBT modules every 5 years to ensure stable insulation performance
  6. Main Accessories & 권장 구성
액세서리 이름모델기능
제어 장치ACS 2040-CUCore control unit matched with phase modules
Cooling Fan3HAC031683-001Special cooling fan for phase modules, support redundant operation
Drive Board3HAC031684-001IGBT drive circuit with integrated protection functions
Voltage Sensor3HAC031685-0014kV system voltage monitoring, realize over/under voltage protection
Current Sensor3HAC031686-0011000A current detection, 과전류 & 단락 보호
Installation Kit3HAC031687-001Including fixing bolts, gaskets, insulating sleeves etc.

이전:

답장을 남겨주세요

메시지를 남겨주세요