접촉기,회로 차단기,태양광 인버터,전기 계량기,태양 전지
Complete Technical Parameters of Siemens 3WL1116/3WL1216 1600A ETU45B-G-LCD-3P
The parameters cover dimensions including basic electrical characteristics, 차단 용량, trip unit, 기계적인 & environmental performance, communication and installation, facilitating engineering selection and system matching.
- 기본 전기 매개변수
| 매개변수 항목 | 사양 값 | 비고 |
| 제품 시리즈 | Siemens SENTRON 3WL | 기중 차단기 (ACB) |
| 프레임 크기 | 3WL1116 (프레임 I) / 3WL1216 (프레임 II) | 3WL1116: 표준 차단 용량; 3WL1216: 높은 차단 용량 |
| 정격전류 (~ 안에) | 1600에이 | Frame size current 1600A, setting range 0.4–1In |
| 극수 | 3피 | Three-pole, 3-phase main circuit |
| 정격 작동 전압 (우에) | 690뷔와 | 50/60헤르츠, IEC를 준수 60947-2 |
| 정격 절연 전압 (우이) | 1000뷔와 | Benchmark value for insulation withstand capability |
| 정격 임펄스 내전압 (음) | 12kV | IEC를 준수 60947-1 |
| 정격 단시간 전류 (Icw) | 프레임 I: 66kA/1초; 프레임 II: 80kA/1초 | Ensures short-time thermal stability at 500V |
| 차단 용량 (중환자실) | 프레임 I: 55/66그만큼; 프레임 II: 80/100그만큼 | Ultimate breaking capacity at 500V; Frame II offers higher breaking capacity |
- Parameters of ETU45B-G-LCD Electronic Trip Unit
| Function Module | 사양 값 | 설명 |
| 보호 유형 | LSIG (엘: Overload/Long-time Delay; 에스: Short-circuit/Short-time Delay; 나: Instantaneous Short-circuit; G: 접지 결함) | Complete power distribution protection configuration |
| 과부하 보호 (엘) | Characteristic Curve: I²t/I⁴t selectable; Setting Range: 0.4–1In | I⁴t characteristic improves selectivity with downstream devices |
| Short-time Delay Short-circuit Protection (에스) | 현재 설정: 2-10인치; Time Delay: 0.1–0.4s | Adjustable inverse/definite time delay to prevent selective tripping |
| Instantaneous Short-circuit Protection (나) | 현재 설정: 2-10인치 | Rapid short-circuit current interruption without time delay |
| 지락 보호 (G) | 현재 설정: 0.2–0.8In; Time Delay: 0.1–2s | Detects ground faults to avoid equipment damage |
| 표시하다 & 작업 | LCD screen, rotary coding switch | Real-time display of current, trip cause and fault records |
| 재설정 방법 | Manual/Auto selectable | Quick power supply recovery after fault clearance |
III. 기계 & 환경 매개변수
| 매개변수 항목 | 사양 값 | 비고 |
| 기계적 수명 | 150,000 운영 | No-load operation, IEC를 준수 60947-2 |
| 전기적 수명 | 10,000 운영 (AC-3, 정격 전류에서) | On-load breaking life, related to operating frequency |
| 작동 메커니즘 | Spring-loaded energy storage type (manual/electric optional) | Electric mechanism suitable for remote control |
| 보조 연락처 | 기준: 2아니요+2NC, expandable to 4NO+4NC | Status feedback and control circuit interlocking |
| 주변 온도 | -25℃~+70℃ (operating); -40℃~+85℃ (storage) | 산업용 애플리케이션을 위한 넓은 온도 범위 |
| 보호 등급 | IP30 (몸); IP40 (with protective cover) | Prevents solid foreign object intrusion |
| 고도 | 2000m 이하 (2000m 이상에서는 용량 감소 필요) | Rated current derating by 1% for every 100m altitude increase |
| 장착 방법 | Fixed type/Drawout type | Drawout type enables maintenance without power outage |
- 의사소통 & Measurement Parameters
| 기능 | 사양 | Interface/Protocol |
| 통신 모듈 | COM15 (프로피버스 DP) / COM16 (MODBUS RTU) | 선택 과목, supports data upload to monitoring system |
| 측정 정확도 | 현재의: ±1%; 전압: ±1.5%; 힘: ±2% | Compatible with Plus measurement function for energy management |
| 데이터 로깅 | 100 fault records (trip type, 시간, current value) | Fault tracing and system diagnosis |
| 원격 제어 | Supports remote opening/closing and parameter setting | Realized by electric mechanism + 통신 모듈 |
- 설치 & Dimension Parameters
| 장착 유형 | 너비 (여) | 키 (시간) | 깊이 (디) | 무게 |
| 3WL1116 Fixed Type | 320mm | 434mm | 291mm | 대략. 45kg |
| 3WL1116 Drawout Type | 320mm | 434mm | 대략. 450mm | 대략. 55kg |
| 3WL1216 Fixed Type | 460mm | 434mm | 291mm | 대략. 56kg |
| 3WL1216 Drawout Type | 460mm | 434mm | 대략. 450mm | 대략. 65kg |
| Mounting Mode | 35mm DIN rail/screw mounting | Frame I width: 320mm; Frame II width: 460mm; Unified height: 434mm |
- Key Selection & Application Tips
- Breaking Capacity Matching: Select frame size based on the system’s maximum short-circuit current. Frame I is suitable for scenarios ≤66kA, while Frame II is for ≤100kA. 에이 20% margin is recommended.
- Trip Unit Setting: Enable LSIG protection for motor loads, with the ground fault setting recommended at 0.3–0.5In. LSI protection is sufficient for power distribution loads.
- 통신 호환성: Select COM15/COM16 module for remote monitoring, ensuring protocol compatibility with PLC/SCADA systems (PROFIBUS/MODBUS).
- 설치공간: The drawout type occupies approximately 160mm more depth than the fixed type. Reserve sufficient operation and maintenance space during cabinet design.
- 대사 & 치받이: The 3WL series has been upgraded to the 3WA series (예를 들어, 3WA1116-3EG45-4GA4), featuring compatible dimensions and protection functions, plus added Ethernet communication and intelligent diagnosis.
—
Ⅶ. 규정 준수 & 인증
Compliant Standards: GB 14048.2, IEC 60947-2, 안에 60947-2
인증: CE, UL, CSA (일부 모델의 경우), meeting compliance requirements for global industrial applications
