ชื่อเต็ม: GX-series EtherCAT IO-Link Master Unit (IP67 Field Type)
การวางตำแหน่งแกนกลาง: รถบัส EtherCAT, 8-channel IO-Link master, M12 A-coding female connector. กันฝุ่นและกันน้ำ, can be mounted directly on equipment frames or production lines without installation inside control cabinets.
✅ ข้อมูลจำเพาะที่สำคัญ
Number of ports: 8 IO-Link ports (M12 A-coding female)
อินเตอร์เฟซบัส: อีเธอร์แคท (IN/OUT M12, supports daisy-chain connection)
IO-Link version: V1.1.2
อัตรารับส่งข้อมูล: คอม1 (4.8เค) / คอม2 (38.4เค) / คอม3 (230.4เค) ปรับอัตโนมัติ
Power supply per port: ดีซี24วี, สูงสุด. 200mA per port, with independent short-circuit protection
SIO compatible mode: Switchable to PNP DI / PNP DO
จาก: ON ≥15V, OFF ≤5V; multi-stage filter time optional (ค่าเริ่มต้นจากโรงงาน: 1นางสาว)
ทำ: Push-pull output, 0.3ต่อช่อง
Power supply range: DC20.4~26.4V (24V ±10%/-15%)
ระดับการป้องกัน: IP67 (suitable for dusty and humid field environments)
ซอฟต์แวร์กำหนดค่า: Sysmac Studio, CX-ConfiguratorFDT
บมจ. ที่เข้ากันได้: NX/NJ/NY series EtherCAT controllers
✅ Main Features
- IP67 field mounting, saves junction boxes, adopts M12 Smartclick quick connectors
- 8 independent IO-Link master ports. Each port can connect IO-Link sensors, เกาะวาล์ว, โมดูลอะนาล็อก, RFID and other smart slaves
- Flexible port mode switching: IO-Link smart mode / SIO digital DI / SIO digital DO
- EtherCAT daisy-chain, simple networking. Diagnostic information (sensor temperature, signal quality, event alarms) can be uploaded to PLC
- Supports automatic upload, download and backup of IO-Link device parameters. No manual setting required after sensor replacement
✅ Similar Series & การอ้างอิงทางเลือก
GX-ILM04C: 4-เวอร์ชันพอร์ต (same architecture IP67 EtherCAT IO-Link master)
NX-ILM08C: NX backplane type (ติดตู้, non-IP67), do not confuse
✅ สถานการณ์การใช้งานทั่วไป
สายการประกอบ, เครื่องบรรจุภัณฑ์, เครื่องมือกล, material handling lines, for mass connection of IO-Link photoelectric sensors, เซ็นเซอร์ความใกล้ชิด, เซ็นเซอร์ความดัน, flow sensors, proportional valves and IO-Link hubs.
✅ Notes
EtherCAT cables shall be CAT5e or higher grade shielded STP cable;
SIO DO is PNP push-pull output, cannot directly drive heavy loads;
All ports share 24V power supply, with independent short-circuit protection for each port.
GX‑ILM08C’s core advantages: IP67 field-side installation, EtherCAT daisy-chain, 8-channel IO‑Link, ports compatible with ordinary DI/DO. It is designed for outside control cabinets, dusty and humid production lines, and differentiated from NX‑ILM08C (IP20 for cabinet installation).
- การใช้งานในอุตสาหกรรมทั่วไป
- Automotive component assembly lines, อุปกรณ์ติดตั้งเครื่องมือ, เวิร์กสเตชันหุ่นยนต์
Connected to IO-Link proximity sensors, เซ็นเซอร์ตาแมว, cylinder magnetic switches, เซ็นเซอร์ความดัน, proportional valves, fixture in-place sensors.
ข้อดี: Modules can be mounted beside tooling without routing cables back to cabinet junction boxes; sensor temperature, signal margin and offset data can be read for predictive maintenance. Parameters can be downloaded automatically during fixture changeover to shorten product change time.
- เครื่องจักรบรรจุภัณฑ์ (เครื่องห่อไหล, ผู้บรรจุหีบห่อ, เครื่องจัดเรียงพาเลท)
For photoelectric detection, material level, ความดัน, web guiding sensors and IO-Link valve islands. IP67 rating fits oily and humid conditions. Ordinary PNP sensors can be used in SIO mode, friendly for retrofitting projects mixing old and new sensors.
- Material handling lines, เส้นเรียงลำดับ, คลังสินค้าอัตโนมัติ, AGV stations
การตรวจจับตำแหน่ง, code-reading trigger and photoelectric sensors for belt conveyors, roller lines and transfer units. Long-distance segmented EtherCAT daisy-chain wiring. ลวดขาด, short circuit and sensor disconnection alarms are sent to PLC for fast fault location and reduced downtime.
- เครื่องมือกล, stamping and injection molding equipment
Peripheral detection of machine tools, ม่านแสงนิรภัย, mold confirmation, mold pressure, cooling circuit flow and temperature. Resists cutting fluid and dust. Sensor degradation data can be collected for early warning to avoid defective batches.
- อาหาร & สายการผลิตยา (wash-down environments)
IP67 protection and M12 quick connectors for wash applications. Connected to sanitary IO-Link flow, temperature and level sensors. Supports sensor ID verification to prevent wrong installation.
- แบตเตอรี่ลิเธียม & อุปกรณ์ไฟฟ้าโซลาร์เซลล์ (การฉีดของเหลว, lamination, การเรียงลำดับ)
Centralized access of large numbers of small-point smart sensors. Sensor parameters can be backed up and restored with one click; no on-site commissioning required when replacing sensors in batches. Status data can be uploaded to SCADA for OEE analysis.
- Functional Use Cases
เซนเซอร์ condition visualization & การบำรุงรักษาเชิงคาดการณ์: Monitor photoelectric received light intensity, sensor temperature, vibration and pressure, set threshold alarms before total failure.
Production line retrofitting: Expand I/O points locally on site without adding new control cabinets. Legacy sensors use SIO DI/DO while new smart sensors run IO-Link.
Flexible multi-product production lines: Automatic parameter download for product changeover, automatic sensor identification and anti-mismatch function.
Distributed I/O architecture: Multiple scattered acquisition points on one line connected via EtherCAT chain, reducing heavy multi-core cables.
III. สถานการณ์ที่ไม่เหมาะสม
Cabinet internal installation with compact backplane requirement: choose NX‑ILM08C
High corrosion or continuous immersion conditions (only IP67, not for long-term submersion)
High-current loads per channel (สูงสุด. 0.3A for DO ports)
- Matching Configuration
คอนโทรลเลอร์: NX/NJ/NY series EtherCAT PLC; ซอฟต์แวร์: Sysmac Studio; Networking: Multiple GX modules daisy-chained with STP shielded EtherCAT cables.
ออมรอน GX-series IO-Link Master Units
✅ GX series only has one official IO-Link master model: GX-ILM08C. GX-ILM04C does not exist; the 4-port field IO-Link master does not belong to the GX series.
| แบบอย่าง | พอร์ต | การป้องกัน | รสบัส | อินเทอร์เฟซ | คำอธิบาย |
| GX-ILM08C | 8 IO-ลิงค์ | IP67 | อีเธอร์แคท | M12 A-coding female (IO-ลิงค์); M12 D-coding (EtherCAT IN/OUT) | Field distributed I/O, M12 quick connect, port switchable SIO DI/DO, compatible with NX/NJ/NY EtherCAT controllers |
Confusable IO-Link Masters from Related Families (Not GX series)
| แบบอย่าง | ชุด | พอร์ต | การป้องกัน | รสบัส | การก่อสร้าง |
| NX-ILM400 | NX | 4 | IP20 | อีเธอร์แคท | Cabinet backplane mounting, ขั้วต่อสกรู, for indoor cabinet use |
| NXR-ILM08C-ECT | NXR | 8 | IP67 | อีเธอร์แคท | Rugged remote terminal, similar form factor to GX |
| NXR-ILM08C-EIT | NXR | 8 | IP67 | อีเธอร์เน็ต/ไอพี | EtherNet/IP version, not EtherCAT |
Additional GX-series EtherCAT Remote I/O Modules (Not IO-Link Masters)
GX is Omron’s large IP67 EtherCAT remote I/O family. Besides IO-Link master, it includes digital and analog modules:
GX-ID16□2 / OD16□2 / MD16□2: 3-tier terminal digital I/O
GX-□D16□1 / OC1601: 2-tier terminal digital I/O
GX-□D16□8 / □D32□8: e-CON connector digital I/O
GX-AD0471 / DA0271: อินพุตแบบอะนาล็อก / เอาท์พุทแบบอะนาล็อก
GX-EC0211 / EC0241: EtherCAT junction / branch units
GX-JC03 / JC06: Extension connectors
คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง





















NH42-63-318x560.png)



