(Modelo: RL31-54/73c/136)
Tipo: Retroreflective sensor fotoeléctrico with polarization filter
Polarization filter design enables detection of transparent films & PET bottles and suppresses false triggering from highly reflective surfaces.
Especificaciones principales
Número de pieza: 183811, Modelo: RL31-54/73c/136
Rango de detección: 20 ~ 9000 milímetros (9 metro), máximo. límite 12 metro; matched reflector: C110-2
fuente de luz: Modulated red light (630 Nuevo Méjico) with polarization filter
Tensión de alimentación: 10 … 30 En DC, no-load current ≤20 mA
Producción: 2 empujar-tirar (4-en-1) salidas, oscuro (Q2), máximo. carga 100 mamá; cortocircuito & protección contra polaridad inversa
Tiempo de respuesta: ≤1 ms, máximo. frecuencia de conmutación 500 Hz
Clase de protección: IP67
Conector: Conector M12 de 4 pines
Dimensiones: 18 (W.) × 62 (h) × 35 (D) milímetros, carcasa de plastico, peso neto 24 gramo
Temperatura ambiente: -30 ~ +55 ℃
MTTFd: 920 años
📌 M12 Pin Assignment (EN60947-5-2)
1 BN (Marrón): +UB Power Positive
2 WH (Blanco): Q1 (Light-on Output)
3 ESTE (Azul): 0V GND
4 bk (Negro): Q2 (Dark-on Output)
💡 LED Indicators
LED verde: Power supply ON
LED amarillo: Signal status (steady / brillante / off indicates signal reserve)
📋 Application & Características
Ideal for transparent object detection (plastic films, botellas de vidrio, embalaje)
Standard RL31 compact housing, widely used on conveyor & maquinaria de embalaje
Fixed-parameter version without sensitivity adjustment potentiometer
Application Cases for Pepperl+Fuchs 183811 (RL31-54/73c/136)
Core precondition: Polarized retroreflective, 9 m rango máximo, IP67, dual push-pull output, no adjustment knob, suppress specular reflection & reliably detect transparent objects; factory reflector C110-2 required
Caso 1: Beverage PET Bottle Filling Line (Aplicación clásica)
condiciones de trabajo: High-speed bottle conveyor with highly reflective empty/full transparent PET bottles; standard retroreflective sensors suffer frequent false triggering
Montaje: Sensor on one side, C110-2 reflector opposite; beam crosses the bottle path, distance 3~6 m
Funciones: Bottle presence detection, missing bottle alarm, filling machine interlock & cálculo. Polarization filter eliminates specular reflection from bottle bodies; beam interruption reliably detects transparent PET without missed detection.
Ventajas: No on-site calibration required; M12 quick connector; IP67 resistant to splashing water.
Caso 2: Horizontal Form-Fill-Seal Packaging Machine (Transparent Packaging Film Detection)
condiciones de trabajo: High-speed BOPP transparent heat-seal film with unstable reflection causing flickering & pérdida de señal
Montaje: Beam spans the machine frame; film runs between sensor and reflector, distance 2~5 m
Funciones: Film break protection & material presence detection to prevent empty sealing & knife damage. Polarization suppresses mirror reflection from thin transparent films.
Nota: Signal margin may be insufficient for ultra-thin films (<10 µm); better suited for thicker frosted transparent materials.
Caso 3: Clasificación logística & Roller Conveyor Long-distance Material Detection
condiciones de trabajo: Long belt/roller lines with cartons & pallets, sensing distance up to 7~9 m, ambiente polvoriento
Montaje: Sensor at one end of the passage, reflector fijado en el marco opuesto
Funciones: Parcel arrival trigger for barcode scanning, sorting cylinder actuation, detección de atascos & tail material monitoring. Only the sensor side requires power (reflector is passive), saving wiring compared to through-beam sensors. Dual push-pull outputs provide redundant light-on/dark-on signals for PLC logic.
Caso 4: Químico diario & Pharmaceutical Packaging Line (Glass Vials & Ampoules)
condiciones de trabajo: Strong specular reflection from glass bottles causing frequent false signals with ordinary photoelectric sensors
Funciones: Missing bottle detection, ejector trigger, part confirmation at sealing stations. Amplio rango de temperatura (-30~+55 ℃) fits cold-chain pharmaceutical packaging lines.
Caso 5: Industrial Rapid Roll-Up Door Safety Protection
condiciones de trabajo: 5~8 m wide door openings on factory overhead doors; prevent door closing from trapping people & vehículos
Montaje: Sensor on one door post, C110-2 reflector on the opposite post; beam runs horizontally across the doorway
Funciones: Circuito de seguridad; beam interruption stops door closing and triggers reverse opening. polvo IP67 & water resistance suits outdoor & car wash humid environments; polarization avoids false triggering from ground water reflection.
Caso 6: Almacén automatizado & Stacker Crane Aisle Protection
condiciones de trabajo: 4~8 m wide storage aisles with metal rack reflections & polvo pesado
Funciones: Aisle intrusion detection, over-height cargo inspection, pallet position confirmation. 9 m long range covers most aisle widths; polarization filters out metal rack reflections to reduce unstable signals.
Caso 7: Automotive Component Conveyor (Glossy Painted Workpiece Anti-False Trigger)
condiciones de trabajo: Mirror-finish painted bumpers & sheet metal parts cause permanent false triggering on standard retroreflective sensors
Funciones: Part presence & station position confirmation. Polarized lens blocks specular reflected light; only actual beam interruption generates a valid output signal, ideal for glossy workpiece inspection.
📌 On-site Operation Notes (Limitations of this fixed model)
- No sensitivity potentiometer: Signal margin must be verified during selection; not suitable for materials with highly variable light transmittance.
- Only use polarized reflector C110-2: Ordinary reflective stickers will render the polarized beam ineffective with no return signal.
- Not recommended for sustained heavy water mist & oil mist that continuously attenuates the light beam.
- Q1 = light-on, Q2 = dark-on, flexible for different PLC logic.
Aplicaciones no recomendadas
Severe fluttering & wrinkling of ultra-thin transparent films (insufficient signal reserve)
Frequent switching between different transparent materials (no adjustable sensitivity)
Sensing distance exceeding 9 metro
Installation Guidelines for Pepperl+Fuchs 183811 (RL31-54/73c/136)
Critical preconditions: Polarized retroreflective, no adjustment knob, mandatory use of C110-2 polarized reflector — these three points are the most common installation pitfalls.
- Optical Beam & Reflector (Máxima prioridad)
- Reflector rule: C110-2 only. Standard reflective tape/reflectors cannot be used; polarized light path will fail with no reflected signal. The reflector must be perpendicular to the sensor; do not rotate the reflector 90° (crossed polarization = zero signal).
- Rated range: 20 milímetro ~ 9000 mm for reliable operation; do not run continuously at the 12 m absolute limit. Avoid installation below 20 milímetros; near-range polarized beams tend to malfunction.
- Beam divergence angle: 3°; light spot expands to ~200 mm at 6 metro. Ensure the entire light spot falls fully onto the reflector surface.
- Keep the beam completely clear; paréntesis, cables and frame edges must not intrude into the optical path. Transparent targets (botellas de PET, película) must fully block the beam, not just partially cut across it.
- Avoid strong reflective backgrounds (polished stainless steel, glossy paint) directly opposite the sensor; even with polarization, close large mirror surfaces may still cause false triggering.
- Do not arbitrarily rotate the sensor or reflector; misalignment of polarization axis results in total signal loss.
- Montaje mecánico, Soportes & Protección ambiental
- Housing size: 18×62×35 mm. Recommended original brackets: OMH-RL31-01/02/03/05; fasten with M4 screws with moderate torque to prevent cracking the PMMA optical window.
- Optical window material: PMMA. Do not scratch with hard objects or clean with strong solvents (acetona, thinner, long-term alcohol soaking). Only use dry lint-free cloth or clean water for cleaning.
- IP67 rating: Tighten the M12 connector fully with intact sealing rings. Mount the connector downward or sideways to prevent water pooling; this sensor is not submersible and cannot withstand continuous immersion.
- Temperatura ambiente: -30℃ ~ +55 ℃. Keep away from heat sources such as motors, heating rollers and hot air outlets. Fit sun & rain shields for outdoor installation.
- Ambient light resistance: máx.. 50,000 Lux. Prevent direct sunlight or high-power strobe lights shining onto the optical window; strong light reduces signal reserve and causes yellow LED flickering.
- For vibration-prone conveyors & shakers, use rigid mounting plus vibration-damping gaskets to avoid beam drift.
- Cableado eléctrico & Fuente de alimentación (M12 4 pines con codificación A)
Asignación de pines (EN60947-5-2):
1 BN: DC 10–30V Positive
2 WH: Q1 Light-on Output
3 ESTE: 0V GND
4 bk: Q2 Dark-on Output
- Fuente de alimentación: 10–30V DC SELV/PELV safety voltage. Polaridad inversa incorporada & protección contra cortocircuitos; add a small external fuse as extra protection.
- Push-pull 4-in-1 outputs with max. 100 carga mA. Do not drive solenoid valves directly; use an intermediate relay or PLC input module.
- Use PUR oil-resistant M12 cables (V1-G/V1-W series). Route cables separately from power lines to minimize EMI; avoid repeated bending right at the connector root.
- Do not run alongside inverter & servo power cables in the same trunking; high-frequency interference will cause signal fluctuation.
- Alineación & LED Troubleshooting (No Adjustment Potentiometer!)
No potentiometer or setting buttons; sensitivity cannot be adjusted. Only mechanical alignment can secure sufficient signal reserve, which must be confirmed at the selection stage.
Green LED steady ON: Power normal
LED amarillo fijo encendido: Adequate signal (≥2× switching reserve, ideal operating state)
Yellow LED flashing: señal marginal (1~2× switching point). Prone to instability from dust, moisture and vibration. Realign the beam or shorten the distance before commissioning.
Yellow LED OFF: No reflected signal; misaligned beam, wrong reflector or blocked light path.
Commissioning standard: Lock the bracket only after the yellow LED stays steadily ON; never accept flashing status for production.
- Anti-Crosstalk for Multiple Sensors Installed Side-by-Side
Multiple RL31 sensors with intersecting beams or facing the same reflector will suffer mutual optical interference.
Maintain sufficient spacing between sensors
Stagger beam heights to avoid overlapping optical paths
Install light baffles between optical windows if beam separation is impossible.
- Key Tips for Transparent Object Detection
- botellas de PET & transparent film must fully block the beam. For films thinner than 10 µm, shorten the sensing distance to increase signal reserve.
- In dusty, misty & ambientes aceitosos, beam attenuation accelerates; reserve extra signal margin and regularly clean windows and reflectors.
- Avoid continuous frost & heavy oil sludge buildup on the optical surface, which will steadily weaken the return signal.
- Líneas de envasado de alta velocidad: Response time ≤1 ms and 500 Hz switching frequency meet most high-speed applications. Calculate the beam blocking duration to prevent missed detection from ultra-short target passage.
- Mantenimiento & Operaciones prohibidas
Do not replace C110-2 with non-polarized reflectors
Do not grind or scratch the optical window
Do not clean lenses with strong solvents
Do not operate continuously beyond the 9 m rated range
Do not rotate sensor/reflector to cross the polarization axis
Inspección periódica: Clean optical surfaces & reflectors, check bracket looseness, reconfirm yellow LED status.
- Safety Reminder
This sensor is not a PLd/PLe safety light curtain and cannot be directly wired into safety stop circuits despite high MTTFd. When used for roll-up door safety protection, the safety circuit architecture must be evaluated separately.
Pepperl+Fuchs Full List | Polarized Retroreflective Photoelectric Sensors (Modelo + Número de pieza)
Nota: All listed models are Polarized Retroreflective type, requiring dedicated polarized reflectors. Five series: RL31 / RL28&RL29 / ML100 / OBR / OBG (clear object dedicated). The model you currently use (183811) is marked.
Matched polarized reflectors: C110-2, REF-H50, REF-H60, REF-H85-2 (not interchangeable between series).
- RL31 Series (9 rango m, no adjustment knob, dual push-pull 4-in-1; same series as 183811, mainstream for PET packaging lines)
| Número de pieza. | Modelo completo | Rango de detección | Producción / Conexión | Observaciones |
| 183811 | RL31-54/73c/136 | 20…9000 mm | Dual push-pull, M12 de 4 pines, dark-on Q2 | Your current model, no potentiometerfiles.pepp… |
| 183809 | RL31-54/25/73c/136 | 20…9000 mm | Dual push-pull, M12 de 4 pines, light-on Q1 | Vivienda idéntica, light-on version |
| 183810 | RL31-54/115/136 | 20…9000 mm | Dual push-pull, 2 m cable fijo, oscuro | Fixed cable version |
| 183808 | RL31-54/25/115/136 | 20…9000 mm | Dual push-pull, 2 m cable fijo, luz encendida | Fixed cable light-on variant |
| 189745 | RLK31-54/25/31/115 | 20…9000 mm | CA/CC universales, Relé SPDT, 2 cable m | Relay output for roll-up doors |
| 189746 | RLK31-54/25/31/115 SET | 20…9000 mm | Includes bracket OMH-RL31-01 + C110-2 reflector | Pre-assembled kit |
- RL28 / RL29 Series (Polarization + supresión de primer plano; eliminates false triggering from nearby debris; 5~9 m, sensibilidad ajustable)
| Número de pieza. | Modelo completo | Rango de detección | Producción / Conexión | Observaciones |
| 128140 | RL28-55/49/82b/105 | 0.05…7000 mm | empujar-tirar, M12 5 pines, sensibilidad ajustable | Polarization + supresión de primer plano |
| 128141 | RL28-55-V/49/82b/105 | 0.05…7000 mm | empujar-tirar, M12 5 pines, with time delay | Time-delay variant |
| 184045 | RL29-55-V/73c/136 | 0.05…9000 mm | Dual push-pull M12 4-pin, supresión de primer plano | 9 m long range with near-object suppression |
| 184044 | RL29-55-V/25/73c/136 | 0.05…9000 mm | Dual push-pull M12 4-pin, luz encendida | Light-on version |
- ML100 Miniature Polarized Retroreflective (3 metro / 5 metro, compact square housing, adjustable knob; mass model for general conveyors)
All ML100 retroreflective models come with built-in polarization filters for glossy packaging & aluminum foil detection.
| Número de pieza. | Modelo completo | Rango de detección | Producción / Conexión | Observaciones |
| 425910 | OBR6000-R103-2EP-IO-V31 | 0.02…6000 mm | Enlace IO, M12, dual push-pull | IP69K washdown resistant, wide temperaturePepperl+Fu… |
| 425911 | OBR6000-R103-2EP-IO-0,3M-V31 | 0.02…6000 mm | Enlace IO, 0.3 m cable corto | Short pigtail version |
| 424050 | OBR1000-R3-E0-P | 0.02…1000 mm | NPN dark-on, 2 cable m, micro size | 1 m short-range miniature sensor |
- OBR New Generation Miniature Polarized Retroreflective (IP69K, Enlace IO, wide temperature -40~+60℃; alimento & washdown lines)
| Número de pieza. | Modelo completo | Rango de detección | Producción / Conexión | Observaciones |
| 425910 | OBR6000-R103-2EP-IO-V31 | 0.02…6000 mm | Enlace IO, M12, dual push-pull | IP69K washdown resistant, wide temperaturePepperl+Fu… |
| 425911 | OBR6000-R103-2EP-IO-0,3M-V31 | 0.02…6000 mm | Enlace IO, 0.3 m cable corto | Short pigtail version |
| 424050 | OBR1000-R3-E0-P | 0.02…1000 mm | NPN dark-on, 2 cable m, micro size | 1 m short-range miniature sensor |
- OBG Clear-Object Dedicated Polarized Retroreflective (For PET, vaso & thin films; dual-mode transparent detection)
Difference from standard polarized sensors: switchable transparent detection mode, optimized for ultra-thin films & botellas de vidrio.
| 426200 | OBG5000-R101-2P1-IO-V31 | 0.02…5000 mm | Enlace IO, M12 | IP69K, dedicated transparent object detection |
| 426201 | OBG5000-R101-PPF-IO-V31 | 0.02…5000 mm | Enlace IO, PPF high-performance version | High-sensitivity transparent detection |
| 426210 | OBG8000-R200-2EP-IO-V15 | 0.02…8000 mm | Enlace IO, M12 | 8 m long-range transparent detection |
Guía de selección rápida (Replacement Options for 183811)
- Reemplazo directo (9 metro, no adjustment, conector M12) → RL31 series (183809 / 183810)
- Sensibilidad ajustable, 9 m polarized range + near-object false trigger suppression → RL29 series
- Espacio de instalación limitado, ≤5 m range, budget-friendly with adjustable knob → ML100 series
- Food washdown environment, IP69K & IO-Link data transmission → OBR6000
- Mass detection of ultra-thin films & glass bottles to avoid missed detection → OBG clear-object series
General Important Notes for Polarized Models
Polarized retroreflective sensors must use dedicated polarized reflectors; ordinary reflective tape will fail with no signal.
Polarized ≠ clear-object sensor: RL31 polarization works for PET bottles, but select OBG for films thinner than 10 µm.
This list only includes models with built-in polarization filters; standard non-polarized retroreflective sensors are excluded.
contactor,cortacircuitos,sensor,Codificador,SOCIEDAD ANÓNIMA,Convertidor





















NH42-63-318x560.png)



